ACETECH AceMOS Plus Mosfet Unit

"I come from homemade mosfet units using really beefy parts including a TVS diode. This mosfet, for $15, is the real deal. It seems just as good as my beefy units, but in a much smaller package. I used it to build my friend's 450 FPS G3 semi-locked DMR. I use XT60 connectors and batteries from HobbyKing, Turnigy Nano Tech (I re-wire them to XT60 as well). 40A micro blade car fuse. I'm really happy with the results. Instant trigger response. The high torque motor 3S LiPo has just enough kick to pre-load the spring for the next shot. Can't ask for more in an affordable mosfet unless you want some of the advanced pre-loading stuff. This def beats the time it takes to build custom homemade mosfets. Would recommend to any tech savvy ppl out there.

"I actually purchased mine from Amazon, but that shouldn't make much difference. The MOSFET comes in a small plastic bag with an AceTech card and a roll of heat shrink tubing that the unit goes into. I installed it into my AUG, and it works fine on both full and semi.

Installation was quite the process. You have to put your wires through the holes on the board and solder them in, inclusing the signal wires, which are by far the hardest (however, this is my first MOSFET). I would also highly encourage anyone who purchases this to be wise in their wire management. I cossed the signal wires over the board rather than have them go between two of the other contacts. This was after I had a runaway AEG incident.

TLDR:
Good MOSFET for the price, just be smart.