Optic shown in image not included
- Full metal aluminum alloy receiver
- 13" aluminum free-float SMR MK1 KeyMod rail system
- Rugged 14.5" carbine length one piece outer barrel configuration
- 8mm upgraded bearing precision gearbox
- Metal hop-up chamber with upgraded H-style spacer
- Pre-installed rear receiver sling base plate
- Adjustable Bravo SOPMOD stock and position numbered buffer tube
- Durable DYTAC water transfer hydrographic patterned film coating
- Standard 20mm and KeyMod modular rail interface systems
800mm / 885mm, Adjustable (Folded / Total)Weight:
300rd Hi-Capacity. Works with Matrix, G&G, Tokyo Marui and other compatible M4 / M16 Series Airsoft AEG MagazinesMuzzle Velocity:
350~380 FPS (Measured with 0.20g BBs)Thread Direction:
Ver 2 Full Metal, Fully UpgradeableMotor:
Long TypeFire Modes:
Small Stick Type LiPo recommended (small tamiya connector in buffer tube; battery not included)Hopup:
Yes, AdjustablePackage Includes:
Gun, Magazine, Vertical gripManufacturer:
DYTACThings you may need to get started:
Battery and Charger – Required to power your AEG; use a high quality battery and charger for best results.
Spare Magazines – Stay in the fight longer by bringing more ammo with you.
BBs – High quality precision 6mm BBs recommended; Use 0.20g – 0.25g BBs for best results.
Silicone Oil – Basic cleaning and lubrication maintenance help keep your Airsoft AEG in top working order.
FPS Range: 350-380
The DYTAC team has over a decade of experience in Airsoft manufacturing and computer assisted product development and design.
We keep up to date with real firearms development and knowledge, and understand how real firearms and Airsoft function to form a sophisticated knowledge pool for our brand. We also understand the purposes, capabilities and limitations between real firearms and Airsoft, and our design reflects upon this understanding by merging the functions suitable for use on a real firearm in Airsoft, at the same time complimenting the internal functions of an Airsoft gun or accessory.
California residents click here for Proposition 65 warning
(Write a review)
"Bought this gun as my first airsoft gun that was “clear soft” and was over all very impressed by the performance out of the box
I had zero stock wobble
No shooting troubles while feilding the gun
Good trigger response and full auto is pretty decent with an 11.1 Lipo in it
Only thing I didn’t like was my selector switch doesn’t click into semi and full it just slides but that not a big deal
9.5 out of 10 for a gun under 200 bucks
"This is my own personal experience with this gun. Keep this in mind as you read. I got this at the Black Friday sale, but I will go ahead and say my experience with this rifle isn't bad at all. The metal is nice, it takes a beating, and let me tell you, this thing is remarkably lightweight, even with the extended handguard.
Now the positives are definitely the look and feel of the rifle, and I find that while the internals don't feel like god-shaking-your-trigger-finger tier of lipo-ready AEG tech, I find them to work very well and quite reliably. Mine fires slower on automatic with a 7.4v lipo, as expected, but the trigger response is great on both modes (speaking of, the fire selector is very smooth and has a satisfying click - they actually put effort into making sure their fire selectors don't grind away at your receiver after slight use). The sound it makes when you fire is quite nice, too. The dust cover does not close, so be warned, though it does have a mock bolt to keep dust out of the hopup chamber. Finally, a useful feature you may like as I have, is the self-retaining motor grip. It has a hinged door at the bottom that opens to access your motor without carrying extra tools.
And that brings us to one of my two only complaints about the rifle - I cannot find extra smr rail pieces anywhere. My only other complaint is that I cannot be sure what internals (motors, specifically) would be most compatible for this rifle, as I tried with CYMA and JG stock and upgrade motors in an attempt to boost my rate of fire further, only for my weapon to make a whining pitch with each shot.
I got this rifle because I was looking for something new. I have bought a lot of AEGs and this one holds a big place in my heart for how truly unique it is. It isn't just a novelty item, but a solid shooter, and I recommend this rifle to anybody looking for something new to grace their inventory. Thank you again, Evike! You guys are a cut above the rest!
"So, I got this gun a while back and I gotta say, it's a very solid gun. I gave it a four star rating because when I got it, the factory shim was too tight so it wouldn't shoot. Another small flaw was that the screws holding the stock in place BROKE IN HALF. It's not that big of a problem since the stock does take a little effort to pop off without the screws anyway. I also found that not just any stick type (btw yes it only uses buffertube batteries) nimh battery will work. Also, if you're a tech, this gun is a pain in the butt to put back together once your done. The gun requires a 7.4v lipo in order for the spring to fully compress. Now the good thing about this rifle is it's really nice look. I swapped out the birdcage flash hider with one of my krytac ones and I also added an ACOG replica and it looks like a beast. Also, the internals are VERY solid as well. Once the gears were shimmed perfectly, the whole gearbox ran super smoothly. The fps is and range is very consistent as well. With an 11.1v lipo and mosfet, I was getting around 25-30 RPS STOCK. It also features a mock bolt, which is not that impressive but worth noting. However, the bolt catch doesn't actually work. It's also very accurate (had about a 5-6 inch grouping at around 100 feet). I ran this gun through a few games and I was hitting some super nutty shots. I will say that the mag it comes with doesn't feed too well but I don't use high caps anyway. I found that CAA mags or K120 midcaps feed good enough for this gun.
-good RPS with an 11.1v lipo
-decent build quality (minus the stock's screws)
-works every time I use it
-consistent shots (chrono'd around 375-380 fps with .20's)
-pre-lubed and upgraded with 8mm bearings
-good trigger response but it has a very audible reset
-Stock's screws broke in half the first time I unscrewed them
-the stock wobbles a little bit
-DOES NOT COME WITH IRON SIGHTS
-hard to find rail segments for this particular type of rail.
-the motor is the hardest thing to put back in once reassembled. (it took me around 4 hours to get it in)
Not sure if this is a pro or a con but this thing is LOUD. My friend told me that he could hear it firing all the way from his house which is about 4 or 5 houses away from me.
Hope this helped :)
Discuss about DYTAC MK1 SMR 14.5 Black Jack M4 Carbine Water-Transfer Airsoft AEG Rifle (Color: Multicam) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" when commenting to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!