(626) 286-0360
Airsoft
Fishing
Air Gun
Angel Custom G2 SUS304 Stainless Steel Precision 6.01mm Airsoft WA GBB Tightbore Inner Barrel (Length: 363mm)
5 Customer Reviews
by Israel G. on 08/10/2020
"I bought this inner barrel for my G&P WOC AR-15 Fighting Cat Kit Rifle.
Was in doubt about the mixed reviews. The only problem was that I ordered the 300mm long barrel, this because I went with Evike's description for the WOC Kit, it states inner barrel 300mm, but since I was so lazy to open the rifle before ordering to measure it, I found out the hard way the correct length for this model of kit rifle is the 363mm.
I just went ahead and installed it, everything fit perfectly on the hopup side, all the notches are there, the hopup gear needs to be installed from the hopup side, not from the front like the kit's instructions say, it wont fit.
The only really thing that is missing on this barrel is the notch for the centering o-ring at the end which can be fixed with a couple of turns of tape.
Great quality and better grouping on my target I was thinking on buying the correct length but I don't see why for now, it just works great lie this.
I hope this helps the fellow airsofters out there...
Peace.
Was in doubt about the mixed reviews. The only problem was that I ordered the 300mm long barrel, this because I went with Evike's description for the WOC Kit, it states inner barrel 300mm, but since I was so lazy to open the rifle before ordering to measure it, I found out the hard way the correct length for this model of kit rifle is the 363mm.
I just went ahead and installed it, everything fit perfectly on the hopup side, all the notches are there, the hopup gear needs to be installed from the hopup side, not from the front like the kit's instructions say, it wont fit.
The only really thing that is missing on this barrel is the notch for the centering o-ring at the end which can be fixed with a couple of turns of tape.
Great quality and better grouping on my target I was thinking on buying the correct length but I don't see why for now, it just works great lie this.
I hope this helps the fellow airsofters out there...
Peace.
by Jaroslav F. on 12/11/2019
"Actually pretty decent. BBs fly strait and I don’t have misfeed issues or jamming issues.
by Erik G. on 07/05/2018
"Wonderful barrel, a little larger diameter but not much, so stock hop up dial needs slight modification. Buy this if you are serious about your WOC GBBR.
by mark s. on 06/13/2016
"WA is western Arms and is very similar to WE but the barrels are very different and the grooves they use to lock into place are different as well as the outer diameter of the barrel that fits into the hope unit.
this WA Western Arms barrel is great but i ordered the wrong one i needed WE
this WA Western Arms barrel is great but i ordered the wrong one i needed WE
by Paul w. on 10/03/2014
"Good quality, but if you're getting this for the WOC Challenge kit M4 barrel. you will need to dremmel part of the hop up adjustment knob to fit over the Angel Custom barrel. I'm not sure if the WA m4 has a thicker barrel, but this wasn't a big deal to me. However, there is no groove at the end of the barrel for an O-ring. This again is an easy fix with a dremmel... but for a tight-bore barrel that's supposed to improve accuracy this should have been standard.
I did see my groupings at 50 feet go from feet to about two inches, so the accuracy is certainly there once you get it installed, but it's not a simple drop in, at least for the G&P WOC Challenge kit m4.
I did see my groupings at 50 feet go from feet to about two inches, so the accuracy is certainly there once you get it installed, but it's not a simple drop in, at least for the G&P WOC Challenge kit m4.