ID: 40927 (SPAD-V7-18-40)
Hover or touch above to zoom
These are precision laser cut Sorbothane ® bumpers for airsoft gearboxes. These pads will greatly reduce the impact between the piston and cylinder.
The pads can also be used to correct your AOE (Angle of Engagement) between your sector gear and your piston- a critical mod for prolonging your piston lifespan.
Sorbo pads aren't a flashy upgrade, but they are a very important piece of a high-performance gearbox. Sorbo pads will do several things to help your gearbox perform at its peak. First, the pads absorb the shock of the cylinder smashing into the front of the gearbox. This is a primary cause of V2 gearbox cracking. While it can't be guaranteed that your gearbox will never crack, the pads will definitely reduce the stress your gearbox sees on every shot. They also help prevent piston head cracking.
Second, the pads can be used to correct your Angle of Engagement (AOE). The AOE is the angle at which your sector gear impacts your piston. If this angle is off, you will prematurely wear out your piston, and is a primary cause of stripped pistons in high-performance setups. Different thicknesses of pads that will correct your AOE by different amounts so you can get exactly what you need to make your gun perform perfectly. Finally, the pads make your gearbox quieter. If you're looking for stealth, the sorbo pads will greatly alleviate the banging noise caused by the piston slapping the front of the mechbox.
Compatibility: For most Version 7 Airsoft AEG Gearboxes
Material: CO2 Laser Cut Sorbothane Rubber
Hardness: 40 (00 Shore Durometer)
To install the pads, make sure the cylinder head is clean and free from oil or grease- otherwise the glue won't stick. Using a small amount of super glue or other suitable adhesive, apply a thin film either the cylinder head or sorbo pad. Do not apply too much or the glue won't cure properly, and the pad may come off during firing. Align the pad on the head and press firmly to stick the pad down. Let the assembly sit for at least 30 minutes for super glue to dry before reinstalling into your gun. Before you install, pull on the pad gently with your fingers. If the pad slides at all, the glue didn't stick right, so try again. If it seems to be stuck down well, then you should be good to go. Evike.com and Scatterplot cannot be held liable for pads that come off while firing, so if you don't feel comfortable installing the pad yourself, take it to a professional.
Disclaimer: Please use discretion when installing custom parts as fit and compatibility may vary. Some modification may be required. Professional installation recommended.
(Write a review)
"I recommend putting these in any gun that you have to open the gearbox on it's worth every bit of its $5 in helping making your gearbox quieter last longer function smoother and more efficiently
"Fit perfectly with my silent piston head (as advertised). This is a lot softer and higher quality than the sorbopad that came with my SHS cylinder head (and that one's already a lot nicer than stock sorbos). Now, my gun is silent if you stand ten feet away! I would recommend these sorbos for any gun, and I really hope Evike starts restocking them.
Note: This isn't going to silent your gun as drastically as mine; it'll definitely help, but you have to go through other steps as well (noise reducing foam where you can, 1.5:1 cylinder-to-barrel air volume, perfect shimming, etc.).
"Great! Just great! I use this in my Shadow Ops L96.
Very cheap in price, not cheaply made. Doesn't tear easily, durable, easy installation and lengthens the life of your piston head by making the clashing between the nozzle and piston less hurtful I guess you could say. Makes the gun much more quiet as well! Highly recommended!
Discuss about Scatterplot SorboPads (Hardness: 40 / 1/8 V7) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" when commenting to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov