Contact Us Tel:(626) 286-0360 Store Locations
Phone Support M-F 9am-5pm PST
Browse by Type or Category
FREE SHIPPING for orders over $99! New deals released hourly and daily. See Deals Here!

Burst Avocado Programmable MOSFET For Airsoft AEG Rifles Ver III (Connector: Small Tamiya)

31 Customer Reviews

by Zack D. on 08/22/2020
"Just received this in the mail (deans connector version) and it is a great little add on to any AEG. The simple plug and play is great for new players/experienced just wanting to add a simple burst feature to their AEG. The mosfet has active braking which seems to work, but remember still be cautious when using 11.1 lipo/LI-ON batteries since this does not protect your trigger contacts. Any mosfet that is not wired to your trigger contacts directly, does not protect it from failing.
It recommends that you do not use a 9.6 battery, but I do and have no issues with it. Very simple to use. There are videos on YouTube to visually explain how it works. Definitely recommend!
by Peter J. on 08/10/2018
"works good and as expected!
by Brandon L. on 08/08/2018
"This does its job. It was great for my DMR, I had it on 2 round burst for a while, and then put it on semi for milsim. it is very sturdy, fits into a buffer tube well, and has kept my wiring alive, with an 11.1v lipo. My only complaint is that on burst, you have to hold down the trigger through the entire burst.
by Erik G. on 07/05/2018
"I love this product. Got it because my friend had one and seemed great. I'm using it for my DSG under 300FPS build for room clearing. Somehow managed to stuff this(with modification)... and a fuse.. and a 1200mah 11.1v lipo into a stock CYMA!
by Dave E. on 02/18/2018
"Good quality and size, works well!

Works very well though and burst function is awesome, good price considering how expensive guns with this function are. Thanks Evike!
by Dale R. on 12/05/2017
"So i have three of these in different guns. So far they have behaved perfectly.
Setup and programming is super easy, just make sure you have a fully charged battery or it wont have the power to program it. Also, make sure to unplug your battery when not in use, as these units do cause a constant drain.
I have been using them with a 7.4 volt lipo and they have all worked great.
They do not protect your trigger contacts like hard wired mosfets do, so if you are going to use an 11.1v lipo i can not guarantee your contacts still wont burn out.
For the price they can not be beat, if something does happen and it burns out, all you have to do is unplug it and plug your battery in as you normally would.
I have found that when you unplug your battery they go back to default setting, but programming only takes about 60 seconds or less.
When you figure that you get a mosfet that can handle any battery type, is fully programmable, is plug and play, and has active breaking, this is a deal that cant be beat.
These are obviously designed for the player who wants more control out of their guns without having to crack the gearbox and rewire. Lets face it, not everyone knows how to work on the guns, let alone use a soldering iron.
So if you want to have some fun trying out programming and have the protection of a mosfet, you wont be disappointment.
by Brian C. on 12/05/2017
"Burst works well , very simple idiot proof programming. Would be nice if it had an hold override for full auto or some such. First one was a dud, burst worked active worked but it would only function on an 8.4 nimh. All other batteries of any voltage or type it would just say ain't happening Tim. But as always evoke made it right, even let me keep the dud. Hey burst and active still worked and an 8.4 is just fine in most .. pleased..

Pros
Easily programmed burst,
Active braking. Don't forget to unplugbatt. iwhen not in use...
Shutdown for heavy load or low voltage motor overheat.
Cons.
No burst to auto, you are on burst. Only but can reprogram on the fly so not realy a true con.
Maybe a bit too tweaky on the overheat shutdown.
Final thoughts
I will buy again, good bang for the buck. Pun intended.
by Donald J S. on 09/01/2017
"Awesome product for a AEG on a Budget that wants multiple Round Burst instead of Full Auto. Simple to program with any kind of Battery and AEG. great snag for the buck.
by Joćo Maria F. on 04/24/2017
"Does this work with Life 9.9v battery?
by Andrew G. on 07/08/2016
"This product is an awesome addition to my ARES Amoeba CCP M4 Airsoft AEG Machine Pistol. Since I use my Ares pistol as my secondary, I don't really care for high fps but rather a nice 3 shot burst at close quarters. And I use a 7.4 Lipo stick battery. I've played a ton of games and no problems.
by Angelo G. on 05/23/2016
"i just ordered it and cant wait to get it!
i mainly want to use it for indoor where full auto is not allowed
pros-small
-it has a mosfet
-1~12 rnd burst!!

um only con is that there is a lot of wires connecting to each other so for optimum electrical transfer i would go with deans connectors.
by Loren F. on 05/23/2016
"I pre-ordered this to give my CA M16 some more realism with the burst fire, and if I had to describe it on one word, the word would be AWESOME. I would say it would definitely be the best modification I have done to the gun. I'm using it with a 9.6v small type battery without any problems. It is really simple to install, literially plug and play. I also like the fact that when the battery gets low it stops, works the same way the MOSFET works on my AUG and P90. I haven't tested to see if there is any improvement in rpm or FPS but it has improved maybe a round or two in rpm. I put it on my AUG and basically stacked the burst regulator and the MOSFET and it worked but no gain by rpm or FPS that I could tell.

Pros: cheap mod
Makes gun more reliable
Burst fire is just Awesome

Cons: Non as of yet

Closing: one of the best buy items ever, BUY it
by Shawn D. on 03/25/2012
"This MOSFET works just as described. I have installed it in my KWA G36C. I found the best place to put the unit is in a small gap within the frame between the trigger assembly and he battery compartment. I'm using a 7.4v Lipo as the 11.1 just causes way too much ROF which in turn actually causes a vacuum within the piston housing and I would watch the FPS drop while holding the trigger. The ROF, even with the 7.4, is still fast and you have to program the Avocado accordingly (two trigger pulls for a three round burst, etc.). I have noticed a much better and faster trigger response with extremely consistent FPS with every trigger pull. Also, my battery life was noticeably extended. Overall, this is the best electronic upgrade you can get, for the price, for your AEG. It is extremely easy to install and program. The size is outstanding for almost any AEG. I've upgraded my G36 barrel to a Prometheus 6.03 which has increased the FPS slightly (398) and has greatly improved accuracy and range. Combined with the Avocado Burst this AEG is a real contender in CQB. I am extremely satisfied with this purchase and will be getting another unit for my KWA SR10. I could remove the unit from my G36 and move it to the SR10, but because of the tight fit in the G36 it would just be too much work to quickly change out the unit. Before, one would have to upgrade lower resistance wiring and solder in a MOSFET to get the same results as this "plug and play" Avocado. A good buy!
by jim s. on 02/20/2012
"Works as described , had to do some modifications to p90 battery compartment to get it to fit in. Works perfectly , going to buy another when they come in stock. One quark though got this so my p90 would shoot on semi , which broke , burst avocado causes about 1/10 shots to shoot twice instead of once , this is most likely because my downgraded p90 shoots at 190fps , however this is not a problem for me.
strongly recommended
by Bradley R. on 12/23/2011
"I got mine yesterday and it is the most amazing thing you can get. It protects your battery and conserves ammo. 5/5 in my books.