Features Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability Precision rotary dial design for fine hopup adjustments Re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot Accepted the nozzle length from 21.00mm to 21.25mm Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight Compatible with any V2 gear boxes with 11mm or 11.5mm bore Specially designed with BB Latching System to prevent dropping BBs after removing the magazine, Manually opened to release BBs from inside hopup chamber by hand
CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit is precisely made to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG series.
The Hopup Chamber ME unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
The Hopup Chamber ME unit is designed to accept the nozzle length from 21.00mm to 21.25mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber ME Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to any V2 gear boxes with 11mm or 11.5mm inner bore.
More than that, the Hopup Chamber ME Pro unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine. The Latching System can be also manually opened to release BBs from inside hopup chamber by hand.
***Test results: FPS might be increased by 5% to 10%. Please check your FPS!
Hopup Kit Includes: 1 x CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit 2 x Strong Clear Vinyl Cover 1 x CNC Aluminum Standard-Hop Arm 1 x CNC Aluminum R-Hop Arm 1 x Silicone Rubber Standard-Hop Nub Damper 1 x Silicone Rubber R-Hop Nub Damper 1 x CNC Aluminum 5mm length Precision R-Hop Nub 1 x CNC Aluminum 6mm length Precision R-Hop Nub 1 x CNC Brass Threaded Slot Pin 1 x CNC Delrin Locking C-Clip 1 x CNC Barrel Brass Spacer 1 x Brass Spacer Holder Oring 3 x Steel Compression Spring Manufacturer: Maxx Model Color: Limited Edition Snowman Red Size: ME - PRO Specifications: Overall Length:
Hub Outer Diameter (to fit into Outer Barrel):
Hub Inner Diameter (to fit Nozzle):
Feeder Outer Diameter (to fit magazine):
Feeder Length (to fit magazine):
For most Tokyo Marui (include KRYTAC, except KWA) M4/M16 standard AEG version 2 gear box
About Maxx Model Products
Maxx Model Products design, manufacture, and make high quality parts for Airsoft products.
(Write a review) "Got the M4i for a CXP MARS II, used with an rhop setup. ZCI barrel, plus elvish tactical patch, modify flat bucking and this MAXX's soft flat nun works fantastic. Even at a low spring weight (M110) you can sail .30 g BBs out to 225 feet. It's a sight to be held. "Slammed one of these in a stock new G&G combat machine with a brushless motor, modify bucking and a laylax tightbore barrel. performance is stellar, the latch system is great, the window in which you can finally visibly see the bbs is great. everything is great about it honestly, if you want to up your performance overall get one! comes already assembled out of the box with 3 in total hop up arms very sturdy and all around will last you a VERY long time
also to MY understanding the Maxx Pro M4A is meant for most AEG's.... again just my understanding, i could be wrong "Got this in my new MARS II Carbine. I've used the standard model in a few ICSs before and they work with minor modifications. This time I got the proper MI PRO version and it fits perfectly with no needs to changes. It's a little better than the stock chamber (ICS use the same style as stock) but I like that it has r and flat hop capabilities designed in. Read More Reviews Write a Review
Maxx Model CNC Aluminum Hopup Chamber for M4 / M16 Series Airsoft AEG Rifles (Model: ME - PRO / Limited Edition Snowman Red) with your friends and fellow Evike.com shoppers!
Have an urgent question about this item? Contact us, our resident experts are standing by to answer your questions!
California Proposition 65
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov