- Machined AISI8620 alloy steel construction, Polymer BCM Gunfighter pistol grip
- Polished, Nickel, and Teflon coated trigger surfaces
- Mil Spec lower parts kit
- Superior tolerances exceeds Mil-Spec standards
- Includes all parts needed to build your AR15 lower
- Complete lower parts kit
This kit includes all the Mil-Spec quality components you have come to expect from BCM, along with some fantastic upgrades
In a commercial market flooded with imported and low quality Mil-Spec imitations, you can trust that BCM parts are made in the USA and to the highest standards. Please look at the information below.BCM PNT Trigger Assembly (Polished Nickel Teflon):
BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago. The BCM PNT Trigger and PNT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull. After that, the BCM PNT Trigger and PNT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product.Bolt Catch and Safety Selector:
The BCM Bolt Catch and Safety Selector are a Mil-Spec AISI8620 investment casting per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). The Safety Selector is center-less ground. The Selector and Bolt Catch are machined to the Mil-Spec, then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. Has a phosphate finish for corrosion resistance.BCM Magazine Catch:
The BCM Magazine Catch Assembly (plate and the post) is precision machined Mil-Spec AISI8620 per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market) and a hardened alloy steel shaft. The BCM Magazine Catch is machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. The shaft is hardened, centerless ground, and precision threaded. Parts are assembled and staked per the USGI TDP and given a phosphate finish for corrosion resistance.BCM Rear Takedown Pin and Front Pivot Pin:
BCM Rear Takedown Pins and Front Pivot Pins are made from AISI8620 bar stock and machined per the USGI TDP for M16/M4 family of weapons. Our takedown pins are given a 3 step heat treat processes and the diameters are ground to final size prior to a corrosion resistant phosphate finish.BCM Detents and Springs:
Takedown detents include a cadmium chromate coating to resist corrosion and prevent them seizing in the small holes of the lower receiver while the Buffer retainer and Bolt Stop Plunger are made from hardened alloy steel for wear resistance and finished with a phosphate coating to prevent corrosion. The Springs are 17-7PH Stainless Steel to prevent corrosion and retain adequate tension for a lifetime of service.
Manufacturer: Bravo Company USA
Color: Flat Dark Earth
Real steel AR-15s trigger assemblyCompatibility:
Most popular AR-15 rifles Material:
AISI8620 Alloy Steel Package Includes:
BCM PNT Trigger Assembly, BCM Pistol Grip Mod 3, BCM Enhanced Trigger Guard, Pin Set, Spring Set
Discuss about BCM Gunfighter ELPK Enhanced Lower Parts Kit for AR-15 Rifles (Color: Flat Dark Earth) with your friends and fellow Evike.com shoppers!
Have an urgent question about this item? Contact us, our resident experts are standing by to answer your questions!
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov