Features Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability Improved accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (include old models) M4/M16 AEG series Precision rotary dial design for fine hopup adjustments Re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot Removable Brass Threaded Slot Pin for setup and maintenance Compatible with ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm Fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs Specially designed with BB Latching System to prevent dropping BBs after removing the magazine, manually opened to release BBs from inside hopup chamber by hand
CNC Aluminum Hopup Chamber MI Sport (with BB Catching System) unit is precisely made to improve accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (include old models) M4/M16 AEG series.
The Hopup Chamber MI unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
The Hopup Chamber MI unit is designed to accept ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm, and also fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber MI Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to stock gear box or any V2 gear boxes with 11.5mm or 12mm inner bore.
More than that, the Hopup Chamber MI Sport unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine.
***The Dual UV LED Boards and Module set are optional add-ons to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)
***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!
Hopup Kit Includes: 1 x CNC Aluminum Hopup Chamber MI Sport (with BB Catching System) unit 2 x Strong Clear Vinyl Cover set 1 x CNC Aluminum Standard-Hop Arm 1 x CNC Aluminum R-Hop Arm 1 x Silicone Rubber Standard-Hop Nub Damper 1 x Silicone Rubber R-Hop Nub Damper 1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub 1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub 1 x CNC Brass Threaded Slot Pin 1 x CNC Delrin Locking C-Clip 1 x CNC Barrel Brass Spacer 1 x Brass Spacer Holder Oring 3 x Steel Compression Spring Manufacturer: Maxx Model Specifications: Overall Length:
Hub Outer Diameter (to fit into Gear Box):
min 11.5mm - max 12mm
Hub Outer Diameter (to fit into Outer Barrel):
Hub Inner Diameter (to fit Nozzle):
Feeder Outer Diameter (to fit magazine):
Feeder Length (to fit magazine):
Compatible with ICS CXP/CS4/EBB (include old models) M4/M16 AEG series
About Maxx Model Products
Maxx Model Products design, manufacture, and make high quality parts for Airsoft products.
(Write a review) "If anyone is writing a bad review on this, they are the issue not the products.
This is hands down the best hopup unit out there. Installation was easy as is with most hopup units. It looks amazing, and holds the setting you put it on very well. The only people that will tell you not to buy these are people that are cheap and don't want quality products. "These hopup units are awsome! By far the best you can get, I've bought 2 so far. I run one the R-hop set up with an Elvish tac R hop barrel from ebay, and the range is insane! The other one I used the normal arm with a flat hop nub and bucking from Modify, and the range is great as well, really can't tell the difference, but I have not shot any bbs heavier than .32. The unit comes with the R-hop set up pre-installed, and its pretty easy to switch it over to a normal or flat hop, just be careful not to lose the little spring under the arm. I'm also using the Maxx aluminum nozzle, although it did not want to work in my EMG Falkor, need a shorter nozzle.
The craftsmanship and design on these just can't be beat, totally worth the expensive price tag! If you want top performance out of your AEG then buy this hopup now! "Works perfectly on my mk2 m crb and srb , get the Me version for krytacs Read More Reviews Write a Review
Maxx Model CNC Aluminum Hopup Chamber for M4 / M16 Series Airsoft AEG Rifles (Model: MI - SPORT) with your friends and fellow Evike.com shoppers!
Have an urgent question about this item? Contact us, our resident experts are standing by to answer your questions!
California Proposition 65
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov