- Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
- Improved accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC and KWA) M4/M16 Standard AEG series
- Precision rotary dial design for fine hopup adjustments. Removable Brass Threaded Slot Pin for setup and maintenance
- Re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
- Compatible with any V2 gear boxes with 11mm or 11.5mm bore. Accepted the nozzle length from 21.00mm to 21.25mm
- Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
- Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting. Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
- Specially designed with BB Catching System to prevent dropping BBs after removing the magazine
Manufacturer: Maxx Model
CNC Aluminum Hopup Chamber ME Sport (with BB Catching System) unit is precisely made to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC and KWA) M4/M16 Standard AEG series.
The Hopup Chamber ME unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
The Hopup Chamber ME unit is designed to accept the nozzle length from 21.00mm to 21.25mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber ME Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to any V2 gear boxes with 11mm or 11.5mm inner bore. More than that, the Hopup Chamber ME Sport unit is specially designed with BB Catching System to prevent dropping BBs after removing the magazine.
***The Dual UV LED Boards and Module set and Single UV LED Board w/ Clear Cover and Module set are optional add-ons to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)
***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!
Hop-up Kit Includes:1 x CNC Aluminum Hopup Chamber ME Sport (with BB Catching System) unit2 x Strong Clear Vinyl Cover1 x CNC Aluminum Standard-Hop Arm1 x CNC Aluminum R-Hop Arm1 x Silicone Rubber Standard-Hop Nub Damper1 x Silicone Rubber R-Hop Nub Damper1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub1 x CNC Brass Threaded Slot Pin1 x CNC Delrin Locking C-Clip1 x CNC Barrel Brass Spacer1 x Brass Spacer Holder Oring3 x Steel Compression SpringOverall Length:
37.75mmHub Outer Diameter (to fit into Gear Box):
min 11mm - max 11.5mmHub Outer Diameter (to fit into Outer Barrel):
min 12mmHub Inner Diameter (to fit Nozzle):
max 8.3mmFeeder Outer Diameter (to fit magazine):
min 9.25mmFeeder Length (to fit magazine):
For most Tokyo Marui (include KRYTAC, except KWA) M4/M16 standard AEG version 2 gear boxMaterial:
About Maxx Model Products
Maxx Model Products design, manufacture, and make high quality parts for Airsoft products.
(Write a review)
"First of all great great great unit !
I just install this bad boy on my custom made M4 and it warm flawlessly BUT it was a bit of hick up due to all my mags are PTS EPM mags if you have this mag and combo with this hop up unit make sure do not fill your mags to maximum it will cause some weird action like BB’s will not shoot out properly
And make sure you have the correct nozzle size also other wise you will not get proper airseal and be aware this unit will increase your FPS by 9-10% so be aware of that as well due to some of your guns might already reach the limit at your local field
And choose your bucking wisely too it will do a big play with this hop up unit too
All in all great unit it just very picky on what’s your combination are.
"Love this hop up BUT be aware it will increase your FPS roughly 10% due to how good the air seal this hop up is but overall one of best hop-up chamber I ever own so far.
"Let me start by saying this:
Understand what you are buying and how to use it (videos online).
To the one-star on this post:
Completely disregard the one-star and try this thing out, chances are that there was an improper installation, customer received a lemon, or ordered/sent the wrong product.
I received the ME Pro and went to a local airsoft shop with a Krytac Trident MK2 and they installed the standard arm with prometheus nub and purple bucking WITHOUT the R-HOP damper onto a prometheus inner barrel WITHOUT an R-HOP.
They had to dial it to 10 (Maximum) to get it to hop .20s. No idea what was going on there but it was not the shops fault because even I was a bit confused at the sight of this thing.
We went home and I installed this thing in my Lancer Tactical M4 WITH the flat arm, R-HOP damper, and R-HOP'd prometheus inner with prometheus bucking. At 6.9 it was dropping at around 185 ft (GREAT) and at 7 it was slightly overhopping (Damn near Perfect).
Conclusion from what I experienced: Mess around with it, try different setups on different guns, understand how it works and it may me the best thing ever. HOWEVER if you have a Krytac chamber or any other rotary hop up thats just great out of the box, I would not consider this an upgrade unless your going for the tracer unit!!
Discuss about Maxx Model CNC Aluminum Hopup Chamber for M4 / M16 Series Airsoft AEG Rifles (Model: ME - SPORT) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" when commenting to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov