Lonex TITAN Supreme Edition Airsoft AEG Motor - Torque & Speed / Long

"I have nothing bad to say about this motor! Insanely fast motor without giving up any torque. I do recommend having at least M120 spring and 18:1 gear ratio, which is what this motor is for. I went from 18 r/s (rounds per second) to 25 r/s with a M125 spring and shooting .28g bbs. Highly recommend anyone to snag one of these!

"Its a great motor for the price. It is the equivalent to a Tienly GT45000 by 6mmProshop but for half the price. Granted it heats up a little quicker on higher tension spring set ups compared to the Tienly GT45000 and will never be able to match the Tienly GT50000 but is well worth the money. I mean come on, its basically a Tienly GT45000 for half the price! I plan on putting this in all my stock guns that have no upgrades planned as a base. Get this if you cannot afford/dont want to buy a Tienly GT45000.

"This motor with a 11.1v lipo is a natural disaster. I cannot even compare my gun with others now. I cant even imagine how it would be with a double cycle gearset.

Pros
Absolutely insane RoF
Insane trigger response
Is supposed to be able to pull an m190

Cons
I don't have it in every gun I own.

Get this, and a good gearbox for it and you'll dominate.

"Also, just a heads up, if you are using anything above a Guarder SP130. So a 140 upwards, you need to use a 9.6 volt battery as anything below 9 just wont pull the spring back.

"Amazing motor, using it in my G&G mp5 and Ics Ape with a 9.9v LiFe battery. Has a stupid high rate of fire an im using a Guarder Sp130 spring with a metal piston an piston head.

Really need to buy another one of these at some point.

"Great motor if your looking to greatly increase the RPS of your AEG!!!!!!

"I using a 20C 11.1V LiPo in combination with this motor has produced a killer of a gun.

Getting 33.3 RPS at 417 FPS in my AEG.
Also, a crazy good trigger response (High-torque gear ratio).

Pros:
-Very high speed of rotation
-Ample torque for stronger springs (I am not sure what rating my spring is... but holding steady at 417 FPS after 4 years I would assume it is up there in the neighborhood of an M140)
-Maintains a good temperature, I haven't detected much heating if any (NOTE: I am not very trigger happy, so it may still get hot under more stress)
-The value to performance ratio is amazing!

Cons:
-Have none to report in the 8 months I have used it...

"Pros
Crazy rof
Crazy torque

Cons
Gets extreme hot with 11.1 lipo
Great motor if ur looking for something with crazy torque and speed

"This motor is awesome!

Pro:
Can pull M140+ spring with ease
Best motor for upgrades (My opinion)
Crazy ROF and TORQUE

Con:
The 20/ 25 Amp fuse won't be able to handle this thing

Good for AEG sniper build. Recommend this to anyone who's craving for crazy FPS and ROF

"This motor is great, but the only gun I've put this in that doesn't cause over spin is the Classic Army DT-4, which uses one motor/gearbox to shoot two bb's at once from two barrels.

"Just got in the mail yesterday. I installed it in my VFC avalon with a m125 spring. Getting avg of 36rps @ 397fps with .25 bbs and a 11.1 1200mah 25c battery. Semi is real crisp as well. Will update in the future as necessary.

"Pros- strong magnets
Descent torque

Cons- magnets are wierd
Asg motors are equal to or better in every aspect
Other motors do the same thing for half the price

Conclusion- a great motor but not worth the money

"I am very disappointed in this motor after looking for a few hours at different motors and read about this and saw reviews on it but this motor locks up my gearbox im not sure if its something I'm doing wrong but I've been trying to fix it for a couple of days now and the most I got it to fire was one mag out of my Matrix sr25 with internals I've been upgrading but when it was shooting it was fantastic shot quick and launched the .25s k was using