ID: 42194 (SA3099)
Hover or touch above to zoom
The SPEED Precision Sear Group includes a specialized first and second sear group that is designed to handle high spring power. SPEED uses a set-screw for the second sear to ensure that during the pivot range, the second sear rotates true on the pivot pin with no shift or wobble. The second sear contact surface is specially CNC profiled with a curve to minimize wear on the M28 plastic piston and extend the life of the piston to a greater amount of shots before replacement. Replaces Stock VSR-10 / M28 Sear SetAll pivot pins are precision ground and hardenedSecond sear triple pin systemCNC profiled second sear contact surface for wear reductionAllows for high power spring set upsSecond sear set screw to ensure shift and wobble free rotationUndercut first sear area for smooth and crisp trigger pullsMachined from USA Grade billet aluminumHard surface anodized for highest durability
Developed by SPEED Airsoft, the SPEED second sear utilizes a very special design of three precision ground pins that can withstand the most powerful spring that sniper owners would ever want to use in their M28 and VSR-10 sniper rifles. The second sear pivots on the center pin and uses the other two pins as a sear lock up while the piston is cocked. This feature allows the SPEED Precision Sear Group to function as a single sear once the piston is engaged.
The SPEED first sear has been reinforced for added strength and the pivot pin is factory pressed in, to ensure that it pivots true and has zero play under load. The first sear surface is undercut so you can get a smooth and crisp trigger pull.
The SPEED Precision Sear Group is machined from USA Grade billet aluminum and hard surface anodized for high durability. It will fit the Echo1 M28 and other sniper rifles that are VSR-10 compatible.
Compatibility: For Tokyo Marui, Echo1 and other compatible VSR-10 / M28 Series Airsoft Spring Sniper Rifles
Material: CNC Aluminum, Hardened Steel
Manufacturer: SPEED Airsoft
(Write a review)
"These sears are great! I installed it along with an Angel custom piston, Angel custom sp150 spring, and Angel custom spring guide into my JG BAR-10. I'm getting about 405-410 fps with this setup! Definitely recommend!
"If you ONLY want the review on the SPEED Airsoft Trigger Sear, skip down and read everything under the dotted line. If you want my inside scoop and opinion on why this is the best upgrade, read the whole review.
This IS hands down the greatest investment I have ever made. And I will tell you why. I first bought my Tokyo Marui in the summer of 2015 and have had it ever since. I love it to death. I wanted to upgrade it because of the low FPS. So, this was the first thing I bought, along with an Action Army M150 Spring and an Action Army 45 Degree Piston. My TM was amazing. The range and accuracy were fantastic. But then I started watching Scoutthedoggie videos and I've always played the sniper role because I love it. So I looked into what Jay and Ryan did to their TM VSR-10 and Well Warrior L96. They were both into the PDI and Laylax upgrades. So I began researching and found that Airsoft Atlanta is the only company that sells them. I couldn't find them anywhere else in the USA. But the issue was was that they were always out of stock and took forever to get more. So Action Army was my go to. This is the total amount of items and their amounts that I have bought for my TM VSR-10.
- Action Army Trigger Unit + Blue Piston - $160
- Action Army Cylinder - $75
- Action Army 45 Degree Piston - $40
- Action Army M130 Spring - $13
- Action Army M150 Spring - $14
- Action Army M170 Spring - $15
- Action Army Hop-Up Unit - $55
- Action Army Spring Guide 2X - $20
- Maple Leaf Blue Deceptions Bucking - $10
- Maple Leaf Pink Deceptions Bucking - $10
- Maple Leaf Green Deceptions Bucking - $10
- Maple Leaf Yellow Deceptions Bucking - $10
- Laylax Damper Pads - $20
- Laylax M170 Spring - $28
- ORGA 6.23mm Widebore Inner Barrel - $96
Why on earth did I buy all of this?! To experiment. To get my sniper right where I wanted it. You know what the total amount there is? $576... And in the end, I really started to regret buying it all. IN MY OPINION, you don't need all of that.
This sear is amazing. The machine work is superb, the anodized coating is perfect and the amount of wear and tear after an M150 and 5,000 rounds is not visible at all. It's incredibly lightweight and indestructible.
All you need is this SPEED Airsoft Trigger Sear, a spring, M130 or M150 by Action Army is perfect, a spring guide, Action Army Spring Guide is great, a 45 Degree Piston and a Maple Leaf Deceptions Blue Bucking. With those items, your VSR-10 performs the same as investing in all of those above upgrades and you spend a ton less. I was the guinea pig and tested it for you all. Use my review to help you make a choice. Call me stupid for buying it all or say thank you for testing it. Use my review or ignore it. For those of you that it didn't help, I'm sorry. For those of you that it did, I'm happy it did!
I'm not trying to make it seem like Action Army is the best. No, No, No. I'm simply stating my setup and how it has worked flawlessly. I'm showing you how to get the performance of a Lalylax/PDI upgraded rifle while keeping your wallet full.
"I have a spring that's putting out well over 500 fps with .2's (obviously I don't use .2s but it's a good reference), and this made everything smooth like butter. You can tell right out the box this is a quality part that's been precision made.
Yes it's aluminum, so yes it wears out. But I think mine would've lasted longer if I would've paid attention To what I did after some routine cleaning. The second sear (aka piston sear) has a set screw to help it not wobble around when catching the piston. When I first installed it, I took great care to make sure it was centered before tightening the screw. Of course during use the gun vibrates, and the set screw loosened until it was rattling in my trigger box. Saw it as a good reason to clean everything. After looking at it, it didn't seem very worn after about 6 months of use with my very heavy spring. However, when I put it back to get her I didn't care enough about centering it. Next game it started slam firing. Maybe that was why, maybe not.
It would be REALLY awesome if evike sold replacement second sears for this set. I have contacted SPEED directly and they said they'd be more than happy to supply them to evike, however they wouldn't sell directly to me. PLEASE EVIKE. STOCK THE SECOND SEAR!!!
Discuss about SPEED Airsoft Precision Sear Group for M28 / VSR-10 Aisoft Spring Sniper Rifles with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" when commenting to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov