Matrix Magwell Conversion Kit for G36 / MK36 Airsoft AEG to use M4 / M16 Mag

Matrix28767
Evike.com
4.5 stars, based on 18 reviews

$25.00 $20.50

Model: MW-G36toM4
x

18 Customer Reviews

by Benjamin B. on 07/21/2015
"I got this for my jg g36c, and let me tell you, it was a waste of money. First off, I had to cut off the top feeder tube because it didnt fit (I guess some guns have that built in, some dont). After that, I got it in the gun, but it would misfeed every couple of shots. Also, the mag ejection system is terrible. I know they don't have much choice, but still. I gave this 2 stars because it sounds like other people are having success with it. Overall, if you feel you really want to use m4 mags in your g36, it might be worth picking this guy up, so long as you don't have a jg g36c.
by Tyler L. on 04/30/2015
"Bought this for my elite force/ ares g36cv and it works like a charm. This required slight modification (and I do mean slight). The only thing I had to do was open up the hole for the body pin. Other than that it just sits snug onto the gun No feed issues whatsoever using kwa k120 mid caps and a kwa 2gx hop up bucking. There is very little to no magazine wobble.
by Timothy P. on 09/11/2014
"I bought this for my Aries HK G36c. It was a simple swap no modification necessary to attach to your gun. Unfortunately there is slight modding needed in order for you to swap mags quickly and effectively.
1st the mag release goes into the magwell too far, forcing you to press the release in order to insert a mag. This can be fixed by placing a small strip of duct tape over the corner of the release inside the magwell. This will allow it to still hold the mag but you will no longer need to press the release to insert the mag.
2nd thing you might need to do is shave down the built up strips of plastic that hold the mag by maybe a millimeter. Not much. Just enough so the mags aren't so tight that its difficult to get in.

All in all though this piece works beautifully. I have had no problems with feeding and everything lines up the way it should. And, it allows me to use the same mags all my friends use. Now I just need to paint it to match the paint scheme on my gun.

Airsoft Magazine Well Conversion Kit for G36 series AEG to use M4 / M16 series Magazines
Matrix (The largest airsoft custom parts distributor in the USA) brings you the MK36 AR mag / conversion adapter, use M4 style magazines on your MK36! This adapter is compatible with most magazines, easy to install, and gives your MK36 a bold new look! Use your M4 style magazines instead of buying extra MK36 mags! Plus, you can use M4 drum magazine which is widely available in the market. Tested with most brands of mags.

Features / Applications:
- Install to enable a G36 series rifle (with two piece hopup) to use M4 / M16 series Magazine.
- Made out of High Quality Materials: Polycarbonate (widely used on bullet proof materials) + Fiber
- Easy installation.
- For G36C, G36K, G36 Rifle and other compatible series A.E.G. by Tokyo Marui, Classic Army, SRC, JG and other compatible G36 series Airsoft AEG.
*Disclaimer: Box magazines that are made to go over or around the magazine well for m4 series might not fit because the MK36 receiver is ticker than m4 series AEG.

Manufacture: Matrix / Socom Gear / Echo1 / Classic Army / Battle Axe

How to install Mag adapter:
1. Remove small allen key from the rear Magwell (should be metric #3 allen key)
2. After removing the screw, knock pin out
3. Push in the mag release button, then pull out the original magwell
4. Take your SOCOM gear X36 conversion adapter, put in front first, as you push in make sure you push in the mag release.
5. Push in the adapter until it locks into place (make require a gently tap)
6. Push pin back through the gun, then screw allen screw back into place
7. All done! Now you can use your AR/M4 type magazine into your MK36 AEG!


Wanna chat about Matrix Magwell Conversion Kit for G36 / MK36 Airsoft AEG to use M4 / M16 Mag?

Have questions about this item? We monitor these comments daily, but it may be faster to email us directly or call us at 1-626-286-0360.

Facebook about THIS with your friends! Comment for a chance to win awesome airsoft prizes. Details can be found on The Evike Facebook Fan Page HERE! Remember to leave "Also post on Facebook" checked to qualify your comment!

Items on Sale