Reviews: JG Engraveable Metal Body Receiver Set For M4 M16 Series Airsoft AEG (Black / Blank)

$55.00 $46.75

7 Customer Reviews
Model: MB-B-X040
Location: D11-322 WO6-04 WO6-05

Displaying 1 to 7 (of 7 reviews)

by JS L. on 2014-09-14 09:00:30
"Overall, a good body at a great price. Some work may be required. Came in JG packaging. Comes with receiver pins, gearbox pin, charging handle, and bolt hold open mechanism. Needs a one piece hop-up unit, the fake right side selector switch cover, and fake bolt plate.

I bought this body to install onto a new JG M16 with a two piece barrel and a plastic body. Here are some issues I ran into:

1) The upper has two protrusions inside the hole the barrel slides into that are supposed to interface with the hop-up channels on the barrel/trunnion. These protrusions,or tabs, ensure that the hop up unit, barrel, and receiver are in alignment. In my case I had to be cut and file the hop-up channels on my barrel trunnion to accept the tabs.

2) The barrel nut from my two piece barrel would not thread onto this body. Having taken a caliper to each, it appears that the threads on the barrel nut are too small, but they could also be threaded differently for all I know. I ended up using a one piece barrel and the barrel nut that came with it (which also solved problem #1).

3) The body's stock extension was too large in some areas to accept the rear sling mount/buffer tube spacer plate without filing.

4) The paint inside all of pin holes had to be removed in order to punch all the pins in.
by andrew n. on 2011-12-26 18:05:04
"I received this metal body for christmas and at first I thought it was broken because the holes on the receivers for the front locking pin are not aligned and the dust cover did not open when I pulled on the charging handle. At first I had to use a hammer to get the pin in and out but working the pin in and out fixed the problem to the point where I can push it in with my thumb and pop it out with an allen wrench. The dust cover problem was fixed entirely by putting in a dummy bolt from my original body.

pros:
strong
fits my Madbull Dragon Fire rail system
came with the charging handle, forward assist knob, and selector switch already installed
upper receiver slides off lower receiver instead of pivoting off
easy to install
comes with its own hop-up

cons:
made by Dboys (this company makes lesser quality airsoft guns)
you have to assemble the hop-up
the mag catch it comes with is confusing (use your own)

the pros out weigh the cons in my opinion.
by Matt B. on 2011-10-24 14:38:49
"the first thing i realized when i got this was that it was a dboys brand body. at first i though it wasn't going to be good, but once when i opened it up i was amazed of the amount of detail they put in to it. every thing came together perfectly, except that the dust cover latch's screw came undone, and that the charging handle didn't even pull back as much as the others, but other than that it was awesome. i give 4 stars because of the latch and the handle.
by Collin B. on 2010-04-03 12:14:11
"Most metal bodies wont give you any problems during installation, but for something like a classic army you might want to keep the original selector switch.
by Kevin W. on 2009-09-17 20:57:04
"Got it on my JG M4 today and I am glad I bought it.

No more wobbling. Much much nicer than my plastic body. If you have a plastic body m4, get this! Takes 15 minutes to install. I never done it before, but it wasn't hard after watching the videos in the external parts category. Thanks Evike.com!
by Sanzo L. on 2008-10-31 10:36:25
"this body kit is a bitch to put it on a M16VN echo-1. don't get me wrong its a great kit i like it
by Casey S. on 2008-07-03 12:34:03
"Nice kit, however, it did have a few problems. First the notches where the delta ring attaches were not large enough to fit on my JP rifles conversion kit, so i had to take a dremmel to it a little to get it to fit, no big deal. My main issue is with the mag catch, now maybe i'm just inexperience with installing this type of mag catch, but instead of the majority of mag catches that i've dealth with that the stud comming off of the catch has a small threaded insert for a screw to hold on the mag button, however, this kit comes with a mag catch that the actual stud is threaded, meaning that the button actually screws onto the stud, so I really cannot figure out how to attach the button to the actual catch, its kind of hard to explain in text, but if you're thinkin about buy this kit, you MIGHT consider also buying a different mag catch that has the seperate screw to fasten the button onto the stud ;)

Still a great kit

Displaying 1 to 7 (of 7 reviews)