ID: 28625 (Wiring-MTX-1074)
Hover or touch above to zoom
Matrix Large Capacity Low Resistance Wire & Switch Assembly. For Version II. (Back)(M4/M16/MP5/G3)
Large capacity / Low resistance wiring & switch assembly for Version 2 Airsoft gearboxes. (For AEG with version 2 gearbox and wiring to the back of the gearbox (Tactical Carbine, SR16, M16, MP5A4, G3SG1 series...)
Matrix Dream Workshop Large Capacity Switch Assembly improves contact and power flow greatly for your AEG to ensure maximum performance.
It is essential for great A.E.G. performance to lower the circuit resistance so the battery power is more consistent. That is why people spend $50 on systema or prometheus Japanese wiring assembly. This wiring / switch assembly contains the low-resistance / large capacity cords and the PBP terminals with the best features of both Systema and Prometheus. The polycarbonate switch assembly is made accurately to ensure the reliability of the gearbox functions. The design of the matrix dream workshop switch assembly also prevents against accidental overflow of current due to its high heat and arc resistance.
-Work for All V.2 gearbox (M4 Series, MP5 Series, G3 Series....ect).
-Designed to reinforce gearboxes from: Tokyo marui, Classic Army, G&G, G&P, ICS, JG, Matrix, Echo1, KWA and other Version 2 compatible gearboxes.
(A highly recommended replacement / upgrade for A.E.G. with harness that requires replacement very often.) This is a redesign of the Systema switch assembly with Prometheus type low resistance wiring.
(Write a review)
"This wiring is horrible. I own one set and worked on two other sets. The soldering came undone on the trigger assembly on two sets. All three have the common problem as mentioned before, the measuring is really bad. Trying to connect the motor wires is a nightmare, they are too short. I had two female ends break off just trying to connect the motor.
If you don't know how to solder... don't buy this.
Improved my soldering skills
Female ends for motor connects break, have to solder back on
"ok so here to clear up some reviews
1. the motor wires are not to short just ran differently than trad.wires instead of both wires coming up the back side of the grip one comes up the back and one up the front this make them perfect length
2.matrix,element,ats,aim top are all pretty much the same company so never be suprised when the show up in each others packaging
3. the wires that are too short are the one coming up the back of the stock, well not so much too short as the connector that is placed way to close to the gearbox causing the need for some connector eliminating actions
4. this wire set is a good one not a huge fan for high power setups mine melted away in a sort time but my aeg is very demanding so in conclusion great for replacement parts not so great for upgrading i have i king arms set on the way will post there later
"This is a pretty good wire set.
It came packaged in a nice little box, and comes with a buffer tube wire.
The wires are clear and thin, so you won't have a problem channeling them through your gearbox. The contacts look great and the wires give a good trigger response and can slightly boost your rate of fire over your stock wiring. The product does not include a spring so if you don't have one already then you need to get one.
I had two problems with this wire set, which are pretty consistent with the other reviewers:
First of all, The negative wire for the motor is too short. This problem is easily solved by removing the shrink tube on the back of the wiring carefully with a razor blade. This way the negative wire is no longer being restrained and can be freely pulled to the length you need to reach the motor.
The worst thing about this wire assembly is the soldering. It is terrible. I was trying to move one of the wires out if the way of the trigger when it suddenly snapped off with very little effort. Luckily I was able to re-solder the wire back onto the wire set, so the problem is solved, but it is still annoying none the less.
Overall this is a good wire set for the money and I would recommend it as long as you are able to fix the soldering. 4/5*
Discuss about Matrix Large Capacity Low Resistance Wire & Switch Assembly. For Version II. (Back)(M4/M16/MP5/G3) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!