Contact Us Tel:(626) 286-0360 Store Locations
Phone Support M-F 7am-5pm PST
Browse by Type or Category
Free Shipping for Orders over $149. EPIC DEALS released daily!

AIM Co2 High Power Gas Blowback AK SVD Airsoft GBB Sniper Rifle (Color: Black)

29 Customer Reviews

by Lee M. on 03/25/2018
"This gun is at the same time, both horrible and also amazing!!!

It can use Green Gas or CO2. With Green Gas it is horribly inefficient and can not get through a full magazine (22 rounds) with regularity. FPS drops off several times, and accuracy suffers from it.

However - Upgrade this to regulated HPA with a $15 nipple, and you have a wonderful, adjustable and fieldable gun!

CO2 is another story completely. Pop in a co2 mag and 12g cartridge, you got at least two full magazines of shots, a kick like a mule, and much more consistency. (1 1/2 mags or so worth of consistent FPS).

With CO2 it's a dream gun, just not adjustable.

If you don't intend to use co2 or HPA, maybe skip this one, but otherwise, it's currently my favorite gun.

Minor gripes:
Mag is a pain to load. Get the special svd speed loader for it.
If HPA Tapping the Green Gas mag, widen the charging access in the bottom plate. You can't remove it without the BBC spring flying out.
by Joy A. on 04/19/2017
"Pretty nice gun! Shoots accurate and true. Don't have much to complain, if you are looking for a SVD gas sniper, go for it!!
by Jason S. on 03/28/2017
"This is a high quality sniper rifle. Portable and accurate
by Fidel V. on 07/24/2014
"If you are looking for a compact light weight sniper rifle with good range, look no further!! I got the OD color but here is the review anyways.

Pro:
High power right out of the box with no modification needed.
Compact and portable, I am a fan of lighter equipments.
Spare magazines are decently priced.
SVD scope is awesome. I got the bipod too!

Con:
Won't work well in the snow due to cold weather and gas compression, but this rifle has the co2 magazine available which completely solves the problem.
by Fidel V. on 07/24/2014
"If you are looking for a compact light weight sniper rifle with good range, look no further!! I got the OD color but here is the review anyways.

Pro:
High power right out of the box with no modification needed.
Compact and portable, I am a fan of lighter equipments.
Spare magazines are decently priced.
SVD scope is awesome. I got the bipod too!

Con:
Won't work well in the snow due to cold weather and gas compression, but this rifle has the co2 magazine available which completely solves the problem.
by Mike C. on 07/24/2014
"I've used this rifle in two games, and both ended up being some of my best in terms of KDR. It's accurate, it's powerful, it's got great range, and aspiring snipers should totally get one.

Even though magazines are expensive and adjusting the hop-up is a hassle, these are very minor complaints for a rifle with this kind of performance.

Also: Normal AK scope mounts are compatible with this rifle. Trust me, you're going to need one.
by Mike C. on 07/24/2014
"I've used this rifle in two games, and both ended up being some of my best in terms of KDR. It's accurate, it's powerful, it's got great range, and aspiring snipers should totally get one.

Even though magazines are expensive and adjusting the hop-up is a hassle, these are very minor complaints for a rifle with this kind of performance.

Also: Normal AK scope mounts are compatible with this rifle. Trust me, you're going to need one.
by Andrew H. on 07/24/2014
"Had to convert a magazine to a 1/8" bulk feed CO2 bottle. The 12 gram canister changing is completely insane. After the following adapting, it is a dream weapon. Used a dummy CO2 adapter and drill a hole in the side of the mag to attach a 1/4" standard CO2 quick-release nozzle. Use some teflon tape for the nozzle-threading into the dummy CO2 adapter. If you are somewhat mechanical, this should be a reasonable task. The magazine shell comes off pretty easy if you have a metric allen wrench set: 2 screws. Watch out for the two levers at the top that are part of the ammo feed mechanism. You can see the lever at the back of the mag to the left of the gas nozzle. You can press it down with your finger to see how it works. Those fall off when the magazine shell is removed if you have it tipped the wrong way, so work on a clean work surface and pay attention.
by Andrew H. on 07/24/2014
"Had to convert a magazine to a 1/8" bulk feed CO2 bottle. The 12 gram canister changing is completely insane. After the following adapting, it is a dream weapon. Used a dummy CO2 adapter and drill a hole in the side of the mag to attach a 1/4" standard CO2 quick-release nozzle. Use some teflon tape for the nozzle-threading into the dummy CO2 adapter. If you are somewhat mechanical, this should be a reasonable task. The magazine shell comes off pretty easy if you have a metric allen wrench set: 2 screws. Watch out for the two levers at the top that are part of the ammo feed mechanism. You can see the lever at the back of the mag to the left of the gas nozzle. You can press it down with your finger to see how it works. Those fall off when the magazine shell is removed if you have it tipped the wrong way, so work on a clean work surface and pay attention.
by Andrew H. on 07/24/2014
"The gun is great

I recommend sticking with the black.

For one co2 cartridge you get about 2.5 mags of shots. I'm working on upgrading one of my mags to a bulk co2 tank using some parts I found on the internet from co2 experts.
by Andrew H. on 07/24/2014
"The gun is great

I recommend sticking with the black.

For one co2 cartridge you get about 2.5 mags of shots. I'm working on upgrading one of my mags to a bulk co2 tank using some parts I found on the internet from co2 experts.
by Ian B. on 07/24/2014
"I love this gun so much. You can't even see the bbs, because they are so fast!
by Ian B. on 07/24/2014
"I love this gun so much. You can't even see the bbs, because they are so fast!
by Ian B. on 07/24/2014
"I love this gun so much. You can't even see the bbs, because they are so fast!
by Andrew H. on 03/18/2014
"Had to convert a magazine to a 1/8" bulk feed CO2 bottle. The 12 gram canister changing is completely insane. After the following adapting, it is a dream weapon. Used a dummy CO2 adapter and drill a hole in the side of the mag to attach a 1/4" standard CO2 quick-release nozzle. Use some teflon tape for the nozzle-threading into the dummy CO2 adapter. If you are somewhat mechanical, this should be a reasonable task. The magazine shell comes off pretty easy if you have a metric allen wrench set: 2 screws. Watch out for the two levers at the top that are part of the ammo feed mechanism. You can see the lever at the back of the mag to the left of the gas nozzle. You can press it down with your finger to see how it works. Those fall off when the magazine shell is removed if you have it tipped the wrong way, so work on a clean work surface and pay attention.