Reviews: Matrix Wiring Switch Assembly w/ MOSFET for Ver.2 Airsoft AEG (M4 MP5 G3) - Rear

$18.00 $13.50

2 Customer Reviews
Model: Wiring-MTX-003-B
Location: D6-199

Displaying 1 to 2 (of 2 reviews)

by Reneboy A. on 2014-05-07 20:24:43
"I installed this into an A&K SR-25 to replace the original wiring with this low resistance wiring and to prevent arching from the 11.1v LiPo battery I like to use.

After installing this kit I no longer have the option of Semi-Auto fire. My DMR is now Safe, Full Auto, or Full Auto.

-Low Resistance wiring allow for crisp and quick motor response when the signal is sent to the mosfet.
-Eliminates the arching from the 11.1v LiPo battery.
-Easy installation if you know how to work on a Version 2 or 2.5 gearbox.

-Small wire gauge cause it to heat up when using a 11.1v LiPo battery in medium to heavy use.
-Wires are pre-heat shrinked so you may need to cut out the heat shrink to adjust the wire length to fit your setup.
-Eliminates Semi-Auto fire!
by Michael T. on 2013-11-14 08:44:32
"Installation into the gearbox was easy enough, that stuff is pretty much exactly like any other basic version 2 trigger switch. Some of the wiring is very thick and definitely has a bit of trouble fitting in the grooves the gearbox has for the wiring but with some finagling it does all fit.

The trigger contact is nice and long so it allows for a very light trigger squeeze to get a shot off. I was putting this in an Echo 1 version 2 gearbox and the trigger contact was is just under twice as long as the stock contact.

I have no idea how well this wiring works in practice. As you can see from the pictures, the leads that connect to the motor are straight. Once I closed the gear box and reassembled everything it was time to put the motor in. After putting the motor in the pistol grip of the mp5 I had to bend the contacts in to make the connection. The first had some trouble bending and felt very rigid, almost brittle. And of course, the second one outright broke off after barely bending it. So no go.

Certainly repairable, but what a pain in the booty. Definitely very hard for me to recommend this product if the leads are just going to break off.

mosfet (?)
long trigger contact

broke, so I don't even know how it works in a match.

Displaying 1 to 2 (of 2 reviews)