Contact Us (626) 286-0360 Store Locations
Extended Phone Support Hours 7am-7pm PST
Browse by Type or Category
Airsoft Season! SAVE 18% with coupon code: SUMMER2018 (Exclude MAP and SALE Items)

Angel Custom "Aegis" High Performance Polycarbonate AEG Piston with Steel Teeth

14 Customer Reviews

by Jose G. on 11/07/2017
"Sadly it only the piston without the head but still looks amazing
by Brandon P. on 08/31/2017
"Well made piston, fairly difficult to sand a tooth off if you're correcting Angle of Engagement. Once corrected, it's a fantastic piston. Slides freely, tracks are perfectly straight.
by Christian C. on 02/25/2017
"I installed this into my buddies g&g combat machine for a dmr build 5 years ago and his rifle is still running strong at 430 fps at 28 rps. truly one of my masterpieces. 10/10 would buy again.
by Audrey E. on 02/03/2016
"The piston actually seems pretty darn strong. I predict that it'll last a while, but only time will tell. I do believe that a G&P piston is better, however, so if you can, I would go with one of those.
by Wilson M. on 02/03/2016
"LOVE this piston. I stripped 1, but that was okay, it had 40000 rounds put through it, and incorrect AOE lol. I have this in my gun shooting with an m130, and no wear at all after about 400 rounds. Amazing. Although I wouldn't put more than an m130 in it.

For Classic Army shells, you may have to take a standard dremel "cutter" bit and run it right down the inner grooves on the piston. It should slide easily, and even better after a mag of shots.

I will definitely buy more if this one strips too. It's a wear and tear part, expect it to have wear if you have more stress on your parts from a tenser spring or lipo.
by Robert G. on 12/06/2015
"The best pistons I've ever used, whether it be full teeth or half teeth truly awesome in the most stressful of conditions!
by Erik D. on 10/01/2015
"So, I had read the reviews AFTER I ordered this piston. I was very hesitant to install it in my EBR, but since it was the only piston that fit, I was given no choice. I am glad to say that I have no idea where the negative reviews came from. I have this set up with an Evike Monster motor, M120 spring, and std ratio gears. The piston works great. It's very light, which helps with the ROF (around 1000rpm with my current setup). There have been about 5000-7500 rounds put through that gun with this piston and absolutely no issues. Definitely a quality piston.
by christian c. on 06/13/2015
"i have no idea what these other guys are talking about because i used this spring for my duddies G&G cm16 raider and i has an m110 atleast. not only that but its a standerd set up so it only fires at 17 rps with the upgrades ive done. the thing shoots like a champ and im considering buying another one of these for my m14.
by Daniel B. on 01/27/2014
"I have only shot 2000 rounds or so with this piston, and no problems this far... My only complaint is that you have to shim the gears extra low because the teeth are quite small. I thought this would be a problem, but not yet.
by John H. on 06/08/2013
"This is by far the best piston I have ever used in my custom guns. It is strong and reliable. The teeth are solidly attached to the piston and the loading/ 1st tooth is very beefy.

If you want a reliable piston for your gun I would buy this.
by khalen l. on 03/11/2013
"Pros - Perfect fit allowing for no need to change angle of engagement. If you are worried about having to add sorbo pads get this piston and your issues will most likely be solved
- Great metal teeth with perfect spacing
- Strong polycarb, I would say this is on par or better than lonex brand.
- Looks good
- Great value for your money.
- This will work in a KWA all you have to do is drill a set screw whole in the front to fit the stock cylinder head or just get a ported on.

Cons - If you have a set screw for your piston head like my stock kwa piston head does you have to drill one into the front of the piston or take the set screw out. This really isn't a big con because of the fact that I have yet to see a piston other than the kwa brand that does.

Overall- I highly recommend this piston as it has great value and outstanding performance.
by David n. on 01/13/2013
"Would buy again if I get another KWA or G&G rifle in the future!

Lighter for higher rate of fire
Full rack of metal teeth
True polycarbonate, the clear stuff is hard and lighter.
Nice packaging
Built precise

by Jason W. on 05/28/2012
"Excellent piston. A great piston to have in the back room for upgrade service.

The guide rails are very slick, piston slides very well in gearbox before lubrication, and even better afterwards. Teeth are strong, 10,000 rounds on 450fps rig with no wear. Also very flashy, looks very cool.

Good fit in shell
Great materials
Good Molding
Metal Teeth
Very Affordable
Impressive crimson color

No cons.

advice to evike: Get a matrix line of these in a bunch of different colors. Make $$
by veniamin z. on 03/23/2017
"Requires sandpaper processing before installation in the G&P. A bit too wide and jam in the cocked position.

Good piston.