Matrix X47 Type Aluminum RIS for AK Series Airsoft AEG Rifles

"This rail is only for the AKs that have the 4 screws in the bottom in and by the mag well (I believe they are the Tokyo Marui spec) The only thing that may be missing are the 2 metric size:M4 set screws that secure the rail from wobble on the sides, you can get two at a hardware store for about $1.50, it should also come with a piece of metal that has a little "hook" that slots into the receiver.

If you Google: "CYMA X-47 TYPE RAIL FOR AK calico jack", and look at images, you will see the exact build of AK this is intended for.

So just to reiterate, this is not for LCT or the Cyma line up that have pins holding the front assembly and receiver together, it is specifically for the ones that have the 4 screws in the bottom.

"This is a solid piece.fits tight with no wobble.and yes,it fit on my src rpk with no problem.this piece is different then other ak ris systems that I've tried in the way that it tightens and locks down.there os mo onstructions though and i dis notice that in the pictures above that the upper ris is backwards.should have no problem with this fitting any ak series excluding g&g and ics.since they are always a weird fit unless you use there products.i would recommend.

"Ok lol this was interesting. Listed as a CYMA branded product. Does not fit on a CM040D (ak105), possibly due to some different tolerances between AKM, Ak74, and AK47, so we'll discount that. However, the front lower handguard retainer was too wide to fit into my CM040D handguard retainer, so um what?

Even more so, the little metal piece that is supposed to fit into the receiver, that came snapped off. Quality feels fine, but yeah I ended up having to buy a lot of different rail systems until i found one that worked with my gun.

Just know that if you have a CM040D and want to try this rail, it probably wont work.

"The build quality is nice. Thats about it. The mounting system is complete garbage. Theres only a thin little metal tab that slots into the front of the Rear sight base. No matter how much i tighten the screw, this handguard wobbles horribly. I wouldnt put any sight on this.

Pros-
Nice to look at

Cons-
Doesnt mount properly
Very loose

"Garbage. Listed that it can work for a AK74 but is to smalll in length. If you have a 74 style AK DO NOT BUY.