Contact Us Tel:(626) 286-0360 Store Locations
Phone Support M-F 7am-5pm PST
Browse by Type or Category
Free Shipping for Orders over $149. EPIC DEALS released daily!

WE AK PMC Spec. Op Full Metal Airsoft Gas Blowback GBB Rifle

9 Customer Reviews

by Adam M. on 03/10/2024
"I've been running this replica since December of 2021, and it is still my regular driver. The trigger just broke last I want to say September? Thankfully there is a full steel replacement so she wasn't down for too long. In general I love this replica for its reliability and ability to keep up with AEGs when taken care of properly. I personally have a tight bore barrel and a maple hopup bucking(if I recall correctly) that keeps my shots tight and put where I want them.

There is something to be said about this replica, it's rugged, high quality, and enjoyable to use. The recoil is no where near the real thing but it's still the hardest kicking ak on the market to my knowledge. The full travel bolt feels good when it reciprocates, and gives a good positive feedback when firing.

My only complaint with this replica is the steel magazines. Their release pin sits out too far and more often than I care to admit, I will accidentally hit it while inserting a fresh magazine. This dispels a certain amount of gas, reducing the magazine's shot per fill. I'd really like to see WE-Tech redesign them similar to GHK. Or KWA. If that were to happen, this would be the perfect AK line in my opinion.

Tl;Dr

Pros:
High quality build
Excellent recoil/full travel bolt
Outstanding parts availability for any user build

Cons:
Some parts are more prone to break than others with wear and use.
Steel magazines release valve sticks out too far.
by ely r. on 11/30/2021
"Amazing in EVERY way! Kicks hard. Feels 100% real. Looks intimidating. You can even add a big grenade launcher in the small lower rail. It's a bit heavy, but that's realism.
by Rafidh C. on 11/24/2021
"This thing is heavy, satisfying, and just plain cool. If you can afford it, pick one up.
by taylor w. on 04/09/2018
"good gun all around. there are some nice aftermarket parts for the gun, you really need mods (like the short travel kit) to actually use on the field. I have put about 30-40 mags through it and no real problems yet. a good thing to think about with this gun is to file the metal mag (personal preference) it comes out of the box super sharp and I find just about every time I use the mag I get cut on it one way or another, the plastic body ones are much nicer to handle. the mag catches on this gun are really weird, they are hard to accurately find and click in and when you put it in wrong, about 50% of the time some gas spurts out and kinda spooks you. but past that, there are ways to get around that stuff, whether you grind, file stuff or replace parts it will be a nice gun if treated and lubed nicely. I just wish some of the cons listed were thought about a little more carefully, especially the sharp edges, they are everywhere. since I have had the gun I have put a folding wire-stock, Wooden fore-grip, suppressor, short travel kit, better hop-up bushing, and some glow-on sights
id do a solid 9/10 for it as no gun is made 100% prefect.

-Things that one should do to better the usability of the gun:
- we, or ra-tech short stroke kit
- better hop-up bushing for shure
- the nozzle return spring is pretty weak, I would get a stronger one like a 150%
-and if you care for accuracy, a nicer tight-bore barrel
Pros:
-full blow-back realism - also Con
-good build quality altogether
-fairly nice build parts altogether

Cons:
-full blow-back wastes a lot of gas, you defiantly need to get a short travel kit for it, it sits about 450 rpm without and about 650 with it and a substantial decrease in gas usage
-metal mag is super sharp
- reloading magazines are a hassle
-lots of other sharp edges wen servicing the gun(mag well, folded over part of receiver next to bolt travel area, and probably some more)
by Frank L. on 06/27/2014
"The WE-Tech AK PMC is truly an amazing gun. Externally, the receiver and barrel are not cheap metal. The handguard and pistol grip are put on and rock solid. I own an AEG AK-47, and sometimes when I carry the gun solely by the pistol grip, it tends to flex. This gun does not have that issue. The magazine wobbles, but it has shown to not be an issue at all. Internally, it's kind of cheap. The horror stories exist, but so do solutions to fix said problems without opting in for RA-Tech or Hephaestus parts. Gun shoots HOT. Will require an NPAS Valve if you're going to field this gun regularly. My gun was chrono'd at a whopping 520 FPS with .20's. An alternative to the NPAS is to use a half charged magazine, filled with Duster Gas. Dropped to 387 FPS.

For an AK, being one of the more common firearms, news spreads like wildfire at a field when someone catches wind of a WE-Tech AK GBBR on the field.

Pros:
- Amazing kick. Hard to control full-auto fire, even at a whopping 400 RPM
- Weight is probably the closest you'll get to the real steel version.
- Rock solid construction
- Shoots HOT
- Parts easily accessible.

Cons:
- Weak Internals (Fixes available everywhere!)
- Shoots HOT
- Average 400 Rounds per Minute.
- Gun's Hop-Up is janky. (May be due to .20's)
by Daniel P. on 03/27/2014
"Pros: really cool high kick. Guuns looks really good overall. It just feels awesome in your hands.

Cons: weak internals (the hammer just broke today; I barely put 1000 rounds in it.

It is an absolute must to buy the upgraded internals after a while. The extra $100 would be worth it down the road.
by Paul H. on 04/08/2012
"Great gun with the mods installed. The GBBR is totally solid all around and feels great. Plus, the receiver and most of the externals are not just metal, but steel so they'll age very nicely the more you play. And lastly, it has a full travel bolt which is great for all you realists out there.

The only draw backs to this GBBR are the durability of the internals and the rate of fire. Sadly, this sucker suffers from some very serious cool down and a fairly slow rate of fire on propane/green gas. Evike claims that it can use Red Gas, but I didn't see it as being an option from the manufacturer. There are 2 after market upgrades out there to increase the rate of fire, so it would be wise to pick one of them up to keep your ROF up. Also, aftermarket steel internals are necessary if you plan on gaming this gun on the regular as there are many horror stories of the stock internals shredding themselves pretty quick.

All in all a great GBBR for the price and will manufacturer's support, EVIKE is the place to buy it.

Pros
- Steel receiver
- Great price
- Compatibility with WE AKS-74U mags
- Potential for external upgrades to give is a classic AK look

Cons
- Weak internals
- Slow rate of fire out of the box
by Noah F. on 01/13/2020
"I have used this gun for awhile now and I think I can give a decent review on it. The kick is freaking awesome love the kick and the feel of using an Ak, the full travel bolt is just awesome, definitely annoying that the gas output is pushed out so if you don't put the mag in perfectly you will release all your gas lol.
Pro:
Ak platform
Rails to put attachments on
Gbbr
Get atleast 2-3 mags out of each charge

Cons
Like above you can kill a mag easily
It's a gbbr (for some people, I guess, nubs)
The Ak scratch on your fire selector
You can find parts for it but with a little looking, no aluminum parts

Would recommend it is a very nice gun other than the downsides, good buy
by Nicolas L. on 01/26/2017
"Runs very well, have used it for both regular field days and milsim events around the state. BUT if you are thinking about this airsoft gun I highly recommend buying the steel hammer for it. the stock hammer will break on you within a couple thousand BBs. Also, do not rely on the sling point on the buffer tube with 1-point sling, atleast for mine, the sling point is not very strong and cannot take much stress. The QD sling mount will not break, just pop off and you could drop your airsoft gun.

PROS
-Shoots well and consistent
-Made well and looks amazing
-Stock hop up and barrel work well

CONS
-Hammer is weak and will break
-QD sling point on stock is weak and not reliable