| Displaying 1 to 12 (of 15 reviews) |
Result Pages: 1 |
|
 |
|
 |
|
This MOSFET works just as described. I have installed it in my KWA G36C. I found the best place to put the unit is in a small gap within the frame between the trigger assembly and he battery compartment. I'm using a 7.4v Lipo as the 11.1 just causes way too much ROF which in turn actually causes a vacuum within the piston housing and I would watch the FPS drop while holding the trigger. The ROF, even with the 7.4, is still fast and you have to program the Avocado accordingly (two trigger pulls for a three round burst, etc.). I have noticed a much better and faster trigger response with extremely consistent FPS with every trigger pull. Also, my battery life was noticeably extended. Overall, this is the best electronic upgrade you can get, for the price, for your AEG. It is extremely easy to install and program. The size is outstanding for almost any AEG. I've upgraded my G36 barrel to a Prometheus 6.03 which has increased the FPS slightly (398) and has greatly improved accuracy and range. Combined with the Avocado Burst this AEG is a real contender in CQB. I am extremely satisfied with this purchase and will be getting another unit for my KWA SR10. I could remove the unit from my G36 and move it to the SR10, but because of the tight fit in the G36 it would just be too much work to quickly change out the unit. Before, one would have to upgrade lower resistance wiring and solder in a MOSFET to get the same results as this "plug and play" Avocado. A good buy!
|
|
|
|
|
|
|
|
Works as described , had to do some modifications to p90 battery compartment to get it to fit in. Works perfectly , going to buy another when they come in stock. One quark though got this so my p90 would shoot on semi , which broke , burst avocado causes about 1/10 shots to shoot twice instead of once , this is most likely because my downgraded p90 shoots at 190fps , however this is not a problem for me.
strongly recommended
|
|
|
|
|
|
|
|
this thing is really cool. tecnically speaking, its not quite as good as some other computerized mosfets because it doesnt stop trigger arching. however, its advantage is that one unit can be used in all of your guns by simply unplugging it from one gun and plugging it into another.
pros:
can be used in any gun that has enough space
1-12 round burst
easy to set
pretty small
active breaking on burst mode
cons:
doesnt stop trigger arching
high rates of fire (above maybe 25 rps?) cause the burst count to be off (i have it set on 2 round burst in my SA58 and i get 3-4 rounds every pull of the trigger
tamiya connectors
i rated it a four because it does what it is supposed to do (give your gun burst mode) but it doesnt stop trigger arching with 11.1v batteries. however for the price, this is the best thing on the parket period
|
|
|
|
|
|
|
|
I got mine yesterday and it is the most amazing thing you can get. It protects your battery and conserves ammo. 5/5 in my books.
|
|
|
|
|
|
|
|
This is a great product. It can be used in ANY AEG, and I would consider it a must-have for any serious airsofter. If you run midcaps (you have to at any milsim event), it will keep you from using full-auto and burning through your ammo. I found with using a M4 with a high rate of fire it works best on 3-rd burst, while with a support weapon I would suggest a 9-12 rd burst.
PROS:
Very Easy to Use (watch the video on it).
Cheaper than any other gizmo out there.
Made in America.
Low Battery Indicator
CONS:
Takes up space: If you have a battery that takes up almost all the space where you have the battery, you need to get a smaller one.
If you have a large or deans battery connection, you must get a large-to-small or deans-to-small connector since it only comes in small connection
|
|
|
|
|
|
|
|
EVERY PRO AIRSOFTER NEEDS ONE OF THESE!!!!!!!!!! HELPS PROTECT YOUR GEAR BOX
|
|
|
|
|
|
|
|
Best $30 i have spent on an airsoft accessory been using this for my cqb aeg and i love it down to the low battery warning and giving away my position. Any player wanting their AEG to have a controlled burst for ammo count this item is for you.
|
|
|
|
|
|
|
|
I love this thing I wish I bought more when it was back on PRE order for $35. Works like its suppose to. Approximately 30 rnd burst when not activated and perfect 3 round burst everytime with my kwa m16, kwa m4, er25k and m4 platinum. I like it alot I wish I had one for each gun. It's worth the 2 month wait since it was revealed.
|
|
|
|
|
|
|
|
Very nice product. It didnt work so well for my ebb but worked perfectly for non-bl0w back. For the blow back it would fire 2 burst 3 burst 3 burst 2 burst 3 burst. But when used in non blow back it goes 3 burst 3 burst 3 burst etc.
|
|
|
|
|
|
|
|
This thing is amazing for the price! I pre-ordered it and I have to say, it was well worth every penny. I added this mosfet to a custom built M16 DMR and it will fit in a full stock with a 9.6 large type battery; although it is a little bit of a tight fit. I also added deans plugs to it for durability and because of the tight fit since they are a smaller plug. Operating the unit is easy, anyone could do it. It adds a burst function and warns you if the battery is low. It also added active braking to the gearbox which makes things much smoother. Having a three round burst is not only realistic, but also economical since it allows me to be more conservative with my ammo. For the price this thing is unbeatable, and a must have for any hard core airsofter!
PROS:
Small
Easy to use
Adds active braking
Adds burst option
Inexpensive and worth every penny
Realism
Helps with itchy trigger fingers
Low battery warning
CONS:
Needs deans plugs from factory
Can't make me breakfast ;)
|
|
|
|
|
|
|
|
A must have for all support weapons.
* Are you tired of having ZERO trigger control?
* Are you filled with performance anxiety when you have to step up to the chrono?
* Does your utter inability to fire semi-auto from your AEG support weapon embarrass you at the chronograph?
_Nah me neither, but this little doohickey will get the job done in a flash._
Just plug-in, program, and away you go.
You’ll be chronoing just like the pros do. Pros like Charles Bronson, Clint Eastwood, Chuck Noris’s beard, and Richard Petty.
Get yours today. Operators are standing by.
I really love this because I can give my support weapon to another squad mate and not worry that they are going to kill my AEG support weapon’s box magazine by being heavy/unrelenting with the trigger time.
Pros:
"soldier proof" programing
Cons:
I only have two of these
|
|
|
|
|
|
|
|
I got this mosfet a few days ago. So far so good with testing. I put deans plugs on it for as little energy loss as possible. The Burst Avocado is an awesome plug and play mosfet. The only thing that tripped me up was when i reconnected the battery it remembered my 6rd burst the first trigger pull. But on the second it wanted me to re-program.
|
|
|
|
|
| Displaying 1 to 12 (of 15 reviews) |
Result Pages: 1 |
|
|
|
Submited By: Shawn D.
Submited By: alex c.
