1 to 9 (of 9 reviews)
"Fits great and looks great on my Real Sword Svd, but the scope won't zero in properly. I twisted the knob as far as it could go to make the cross hair go left but it won't adjust far enough to be lined up correctly. "I really hate to say this, but this scope, from a functionality point of view, is not what I expected...
I bought this for my Echo 1 CSR and once I first opened it, I loved it! It looks really cool, the reticle looks good, it has a clear view, and it makes my svd look 100000000 times cooler. For me it was relatively easy to install correctly using a small mallet.
That's really the only good thing about this scope. I bought it with the intention of using it on my svd in airsoft games as a dmr with the correct looking scope. And there is a HUGE letdown to this. The elevation and wind age adjustment knobs are near non functioning at all. I've literally turned the wind age knob to its limit and it still shoots in the near same spot. The only way to sight the gun is to hop the bb so it flies into your reticle, which is ridiculous as you aren't taking the most out of your gun's accuracy, and the target must be standing at x distance it was hop sighted for the weapon to be accurate. The bbs only fly straight offsetted FAR to the right from the reticle, which is extremely annoying when trying to aquire targets at long distances. And it really takes away from the great accuracy and range of the weapon itself.
Overall, it really is a dice roll. Some of these from the factory I've heard are rather nice, a higher number it seems come non functioning better or worse than mine did.
Is it worth it? Depends what you are using this for. If you are looking for a cheaper placeholder of a PSO-1 scope to look cool on an airsoft AK/SVD rifle this is for you. If you wanted to buy this and put it on an AK or VSS aeg it would definitely be more useful for spraying lots of bbs farther down range while looking cool.
However, if you want to buy this with the intention of use as a diehard, replica scope for a high end upgraded airsoft SVD rifle being used as a precision squad sniper, you really may want to look elsewhere. It just isn't worth it. Rather than spending the money and risking getting several defective ones before you get a decent one, your honestly much better off getting your money's worth and just buying a real PSO-1 scope that you'll know will work. Or a better replica such as the G&P version if it is available. This scope is by no means real steel grade and it is purely no more functional than a prop. Not even worth 100$. Not even 90$.
4/5 for looks
1/5 for performance on the rifle "Well, I'm not gonna pull any punches on this. I hate to have to run this thing down, but it is what it is and I wish I had done more research before I bought two of them, one for me and one for my son. It looks great, but it is not a useable scope. If you want it as a decoration to make your SVD look all Dragunov-y while it hangs on the wall, well that would be a good use for it.
First of all, it puts a huge gouge in your top dust cover. I was focusing on the rails while I was putting it on and did not notice that the light bulb housing was gouging my top cover all the way on. This is part of the reason it was hard to put on. I had to get a new dust cover for my WE SVD because of it.
Secondly, and most importantly the reticle CANNOT be adjusted. The windage and elevation turrets are completely non-functional. They click. That's all they do. This more than anything makes it useless. You cannot sight it in. Utterly worthless unless you like to use hold-off for every single shot. It is a low power telescope with a 1000m illuminated SVD reticle inserted. Also, the wires are pretty loose and will need some attention to avoid intermittent illumination problems.
I finally just followed the advice of others I had seen on youtube who recommended obtaining a real PSO or POSP scope. Wow, what a difference! There is no substitute for the real deal. This concludes my review/rant. Good luck, and be careful out there. "I had a bad experience with this scope.
It does not fit the AIM svd properly. It wiggled around quite a bit.
Then when i took it to a game one day the cross hairs were out of focus. Adjusting the magnification didn't fix it "Great scope for the high price, Fit my King Arms SVD easily, no need to bang it with a hammer or anything and it looks AMAZING. Worth it for any SVD.
10/10 "PROFESSIONAL REVIEW
hey everyone, I wanna clear up everything about this scope. 5 guys on my professional team have this scope. It is an astounding copy of the SVD PSO-1 DMR scope, this is, classified as a DMR scope being only 4x zoom but that is all you need for it. And as I said, it is a COPY. all these issues I hear about the scope not going on are user error. If you look at the latch that on the mounting system you will see a small silver bolt that looks like a round castle. Called, a Castle Bolt. (Large concept I know) you must hold down the castle bolt. And turn the screw to raise or lower the height of the rail latch. It will fit on ANY SVD without filing or modification IF you adjust the castle bolt. Look on YouTube for simple tutorials. "How to adjust the castle bolt on PSO-1 airsoft"
The ONLY issue I have seen with this scope is a very rare factory defect where the Chevron reticle is tipped sideways, and is not fixable unless you entire disassemble the scope, and realign the lens with the fiber optic on it. It is rare but can happen. Before you even attempt to get this scope on, take the scope, turn it upside down and balance it on the wordage knob on top on a flat surface, turn on the illumination, and look thought it. If its not entirely parallel to the table send it back and the next one will be perfect.
Other than that I have no complaints about the scope. If you know anything about wiring I would solder the wires for a tighter connection, and maybe even simplified, tape them together, because there are two wires that power that optic, just put a piece of electrical tape to hold the two wires tiger, then tape them to the actual scope wherever they fit and look nice. This will eliminate any issues with wires snagging and tearing.
I give this scope a 9/10. It is nothing compared to the true USSR Issue PSOP which I run on my AIM GBB SVD. But it is astounding airsoft quality reproduction. The chevron reticle is spaced perfectly, and is easy to use if you know how.
Here is how you use the chevron I aiming system. If you google a chevron reticle and look for reference it is easiest.
1: the bottom line that is running all the way across the scope, line that up with the curved line. Whatever you are aiming at, place their feet at the line, and they're head should hit the top of the curved line. When you get your reference point, slide your scope over just a tad, to where it reaches center wi the arrows, and there's your theoretical headshot. For airsoft it works absolutely perfect of you know how far your gun shoots at varied distances. I hope this review aids many people in buying this scope and keeping the SVD True to its beautiful look. "Great scope. I love it! Designed for quick reads and scoping on the move.
It was loose on my rifle but it's easy to adjust. Under the locking hammer there's a
spring with a little plate. Push the plate up compressing the spring and you can turn
an adjustment nut. It's right next to the plate. Tighten it for tighter fit and loosen it for looser.
Only issue I have is inconsistant current for illumination. "I got this for my A&K SVD and it wouldn't slide on properly. I had to file down the scope so it could slide onto the side rail on my rifle. It is also very easy to make scratches on the metal, but once I finally got the scope on, the rifle looked so awesome with the scope on! I gave this scope a 4/5 because I had to file it down a bit, but it works like a charm! "I got this one for my Matrix SVD Dragonov.
It was very hard to get on. Even after I figured out that I need to place the front bolt of the scope into the center grove of the gun rail it would not slide in all the way.. I lubed it and finally had to gently tap it in with a hammer.m, good thing its full metal
The objective has a lens cover which is great but it has begun to rub off a thin film on the scope. I don't know why the film is there and the gun does not look bad without the film. It might be to protect from rust?
The lens is very clear and scope works with or without illuminating the target sight.
the gun DOES LOOK VERY COOL WITH IT.
It is a bit expensive but with the 20% off coupon it helps
- Full Metal = VERY STURDY!
- Clear Magnification
- Sight can be used with or without illumination
- Batteries are installed and it came with an extra set
- Comes with Front Lens cover
- VERY HARD TO GET ON
- The outside front of the scope has a plastic film that has already started to rub off from the friction
of the objective lens cover
- A Bit Pricey.
It is a very nice scope, I am not crazy about the design but then again it is Russian.
So for this scope
I give it 8/10 Displaying
1 to 9 (of 9 reviews)
Back to Product Page
Write a Review