Matrix Triple Rail Set w/ Screws for PTS / MOE / MASADA / ACR Handguards - Black

"Worked on a normal m4 Nagpur handgaurd and are made of insanely high quality metal, they did what they were supposed to so 5/5

"Works great on my A&K Masada. The other reviews must have installed it the wrong way as I had no trouble with the screws, and I didn't lose any battery space. If you get longer screws it will interfere with the battery. Overall very nice quality and very sturdy.

"I bought these for my a&k acr and they are great quality but since i have a stick battery the longer bottom rail blocks the hand guard from closing all the way but with a butterfly battery it theoretically could work better. I have yet to buy one but hopefully soon. This is to advise any a&k acr users looking to buy these of what is the correct battery type to use with these

"This is a strange review because I actually ordered an entirely different rail set for my KWA LM4, but I guess something happened during shipping and I ended up receiving these rails instead. The rail set I originally purchased was about $5 cheaper so when I received these I wasn't too upset but I don't own an ACR or masada to use these with. The longer rail ended up fitting on my KWA which has regular m4 hand guards pretty good anyway. I put the other to smaller rails next to each other on my g&g combat machine and they worked exactly the same. I'm slightly angry that I didn't get the set I originally ordered but these rails worked fine with both of my m4s so I can't complain too much.

"This is one of the best accessories you can get for you Masada, ACR, or Magpul M4 Handguard. HIGHLY RECOMMENDED if you want to use flashlights, lasers, grips or other attachments. The reason I recommend this rather than the $90 RIS System for the Masada is because it is cheaper ($70 difference!), high quality (CNC Aluminum), and the rail space is spacious (especially the bottom rail!). I use it on my A&K Masada and it is amazing. There are going to be a few flaws of it though. You should beware that the screws that are provided are kind of short and do not fully fit the A&K Masada Handguard. I went to my local hardware store and picked up the same type of screws that are a little longer and those worked perfectly. The screw sizes were the Metric M5 .80 Hex head screws that are the same size as the ones provided. If you are unsure that they will fit the rail, just bring the rail and the screws that came with the rail and compare them to make sure they fit. I found them in no time.

Pros:
-Cheap (Save $70 by buying this than the MASADA / Magpul PTS R.I.S. System. RIS also has less space.)

-Quality Built

-Easy To Attach (If you have the right screws)

-Lightweight

-Looks nice

Cons
-The screws provided don't fit the A&K Masada (Buy the longer version of the screw at hardware stores)

-You have to put the side rails more towards the receiver of the gun or else the handguard won't fully close and you cannot put the pin in to connect it. (A&K Masada)


Overall this is one of the best products I got for my A&K Masada! HIGHLY RECOMMENDED!!!

"Pretty good, but only the bottom rail fit on my A&K Masada without interfering with the battery. I'm not sure what is wrong but be cautious when installing these. But they are really strong. Overall, pretty good.

"You can spend almost the same amount of money in original magpul lower profile rails. i ended giving this ones away to a friend. Screws and plate are cheap and tends get loose easily. Overall... Meh..

"I love and hate this rail set. I use them on my Magpul PTS 7.62 AKM CQB AEG. I will start with the good. The rails themselves are excellent quality and exactly what you would expect. Everything in this set is made from high quality materials and has a good finish. I haven't had issues with them falling off or coming loose, but I haven't mounted anything really heavy on them yet. They make the handguard slightly more difficult to put on the gun, but not enough to be an issue.
Now for the bad. The screws and plates have poor workmanship, the plates especially. Neither my American or Metric hex wrench sets would fit the screws. I ended up using a 4mm because it was the only thing that even vaguely fit them, and I had to really work it to get it deep enough for me to turn the screw without stripping the head. The plates were drilled to fit the screws and flower out the back. I had to break off some of the flowering (and the channel for the screw) to get these to fit in the spaces on my handguard. This was very difficult because of the high quality materials, which is reassuring, but despite my efforts it was still very difficult to actually get the rails mounted. On top of that, actually getting the plates to sit flat against the inside of the guard was also a pain because of the flowering, and possibly the angle of the channel for the screw. I tried flipping the plates around, but the flowering stuck out to much for me to get the handguard back on, and i'm sure the flowering on the plates on the bottom of the guard would tear my batteries if I could get it on. I feel that these could have been made a LOT better.

Pros:
High quality materials
Excellent finish
No wiggling
Perfect rails

Cons:
Poor workmanship on plates and screws.
The flowering of the plates make it very difficult to actually mount the rails.
The Hex size for the screws is slightly too small for a 4mm hex wrench and doesn't fit anything else.

Conclusion:
If it weren't for the high quality materials, I probably would have returned the whole rail set. I don't expect any problems with these now that they are actually mounted, but getting them mounted was FAR more difficult then it had any right to be. However, the quality materials these are made from means I may never need to replace them.

"Bad quality for the PTS Masada GBBR MOE Handguard. For those interested in the Masada, MOE it's not the same as M-LOK so if you want to add accessories you have 2 choices: Buy this item or buy the PTS Railed Handguard for the Masada.

"Dont buy these they dont work with magpul pts moe rails