Reviews: Matrix Magnum High Torque Performance Airsoft AEG Motor - Long Type


55 Customer Reviews
Model: MO-Magnum-L

Displaying 25 to 36 (of 55 reviews)

Pages:    1  2  3  4  5   
by jose jesus l. on 2010-05-21 03:17:06
"well this motor is powerful ,but when you make a product that is to perform ,you don't use nice product and then use cheep plastic on the rear of the motor !
i installed this motor with laylax gear and a real pdi 170% spring not the fake ones they sell now and try to make them sound like a pdi spring first of all pdi spring are teated so they dont lose any % through the life time of the spring second any spring that is silver of colored are junk !
i know this because i have been a tech for 15 year and pdi springs when in stalled right do not lose fps ,
i have aegs that are five year old that shot 400 fps with .25 5 years ago and to this day fire the same fps as the day it was built ,unlike silver springs or colored springs the thing with silver or colored springs is they can't be teated because of the type of metal , so don't be fooled .
ok so i put matrix motor in a customers weapon and it was in a mag p pistol grip motor plate was just right .
this is what get me about new parts is the people that build these parts ,if you know anything about airsoft aeg you would know that a powerful motor wants to twist in the grip so the bottom on the motor needs to be reinforced ,well the weapon shoot fine tell i head a awful sound that out of the 100 of aegs i have built this was a new sound but knowing the only new this i put in this aeg was this low end motor
well i took off the bottom of motor plate and the the bottom of the motor where the cheep black plastic held the rotor inline and also keep the bushes on the rotor ,the plastic blow up into 4 pieces .
now i can under stand if i was using a pdi 260% with a 11.1 v battery but this was a easy build ,so all i can say is until they reinforce the bottom of the motor i would stick with the g&p 160 or systema mag ,sorry if i have type o i have had a long 16 hour day but just thought you all should know and mybe they will fix this motor ,then again they might not care and keep selling junk ,i hope for you sake they fix this
by Matt B. on 2010-04-08 21:46:01
"I installed this in my BE Type-89 today and tested it out with an 11.1v Li-po and it makes the 3-round burst EXTREMELY sexy. I have my gun rewired with an AB-LONG-MOSFET and no Dean's connectors from the battery plug to the trigger contacts, so there is little to no electrical resistance. The torque on this motor is insane, it's harder to turn than my SRC Ultra torque motor. I highly reccommend if you are a semi-shot user or if you have a gun capable of 3-round burst.
by Brendan M. on 2010-04-03 01:17:49
"These motors are 100% absolutely worth what they are listed for. These are half the price of the Systema Magnum and have extremely similar outputs. However, like every other motor, they arent without their flaws, however, the benefits definitely outweigh the problems.
STRONG! (hard to turn pinion by hand)
Works well
Great trigger response
Good ROF

Too strong (9.6v NEEDED, mine wouldnt pull the spring (M110) with an 8.4v)
Weak pinion gear (showing wear at 5k rounds)
LOUD, because of this precise tuning is a bit of a pain

Overall, a simple replacement pinion gear and you are 100% set.
by Jordan B. on 2010-04-01 05:42:26
"TO ANYONE WHO WANTS TO PURCHASE THIS FOR THERE P90 E90 SETUP. The motor fits excessively tightly into the motor mount and definitely is horribly hard to remove once in. would highly recommend looking around for a similar motor.
This is a was a great motor though, But does not want to part from the housing
by Andrew S. on 2010-01-29 20:27:20
"This motor is great pulls my m150 with 10 volt - no problem very powerfull. Soo glad i bought this 6 stars! my rof increased dramaticaly compared to my older model systema motor
by Melinda M. on 2010-01-20 20:29:14
"Bought this and placed it inside my Classic Army Scar Heavy and this motor is amazing. It gives the perfect balance of tourque & Speed etc. Not too much of either but just thr right amount. My SCAR cycles so much easier now and fire friggin laser beams. I would recommend this Magnum to anyone.. The magnet in it so really really strong and the motor roars.
by Kane L. on 2009-11-26 07:25:28
"Very satisfied with this motor runs very hard and able to pull 130 spring with greatest of ease for better motor than eg1000.
by De Niro E. on 2009-03-25 21:28:28
"This Matrix Magnum motor is a BEAST, real work horse!!! They should measure this motor in horse power its so strong....I chrono at 560-590fps, ROF is 22sec, i love it! I also have the MATRIXs 8mm gear box also with a cheap all metal JG hop-up unit, with a cheap D-Boys Metal body, and Lipo battery. Total cost of the gun build up is $283. MATRIXs Gearbox and MATRIXs Magnum Motor $155, JG all metal hop-up $8, DBOYs Metal Body $40, DBOYS pistol grip $8, JG 733CQB outer barrel $12, A&K RIS rails $29, and MATRIXs 6.035 tight barrel bore $29. This gun build up is better than any stock gun for $400. I highly recommend ALL Matrixs products high quality really cheap price. 5***** i am the hardest hitting gun on the team. Systema Who??? Matrix is what it is!!! I have almost a full MATRIX Gun minus the Externals.
by Kim L. on 2009-03-15 13:33:23
"Will this thing work for a lipoly gearbox? If not, what will, thanks.
by Jason R. on 2009-02-26 16:29:28
"I have purchased 3 or these motors so far. I was waiting to post a review until i completed an adequate test period.

This motor absolutely performs on par with the systema magnum series motor. I am currently pulling a m140 spring with a JG high torque ball bearing gearbox and this motor allows for low voltage operation. proper cycle speeds can be achieved with the use of a 8.4V battery. this motor has also stood up to LiPoly operation in a m130 gearbox achieving rate of fire of approx. 25RPS.

i did not want to post before running these motors for 50,000 rounds and having just completed 50,000 cycles with a m150 spring these motors are absolutely worth the money.
by Maggie C. on 2009-02-19 16:44:58
"This is an awesome motor. This thing will pull really heavy springs at an incredible rate. Pops into any gun that uses long type motors like M4s & M16s easily. The magnets inside this are super strong and my screwdrivers keep clinging to my grip. Get this motor and you won't need another for a really really long time.
by Mathew D. on 2009-02-16 19:13:50
"Beastly motor, I use it with my M16 Sniper with an M160 Spring and my ROF flew through the roof for some reason along with the 550+ FPS with the M160. Definitely a great buy for FPS and torque up motor. I recommend 9.6 4500Mah Battery it is flawless with it.

Displaying 25 to 36 (of 55 reviews)

Pages:    1  2  3  4  5