1 to 12 (of 12 reviews)
"This is the best bucking I have ever had. it effectively doubled the range on my stock AK47, and Increased the fps by 20.
Major range difference
Cheap and effective
Can deal with high fps
Both of my spacers where deformed, so it wouldnt go into my hop up
Very tight fit
Had to adjust a couple times to make it work, and taking apart a AK is a B**ch.
WORTH EVERY PENNY, HIGHLY RECOMMENDED. 4 STARS DUE TO SPACERS. "First off let me just warn everyone that these bucking are an extremely tight fit (at least into standard G&P hop up Units). However after the initial squeeze and the first hundred rounds or so, this bucking will blow you away.
The day I installed this bucking into my G&P M4 Sentry I also managed to break my MadBul 6.01 363mm tight bore barrel. As a back up I threw in my old CA 363mm (6.05) stock barrel off an old Sportline instead. I took out my Angel Custom H hop bucking and put in the provided fishbone as well. Again, it was a very tight fit, and it was nearly impossible for me to get the bucking seated perfectly inside the hop up chamber, so I threw it all together and went out to shoot, hopping that it would settle itself and it did. After about a mid cap's worth of BB's shooting straight up (despite hop up being off), it settled in and the accuracy and range increase from the bucking alone easily out did the benefits i saw from the Madbul 6.01 barrel. Make sure to lube it up well (the outside or it!!) with some silicon oil so it slides in better.
Increased my grouping by and inch or two better than my madbul barrel grouped
Better/aligned air nozzle to BB contact
Helps prevent jams
tight, however, once in the hop up chamber the air seal is amazing.
minor... MINOR break in period. "I installed this with the included fishbone spacer...all I have to say is WOW. This thing dramatically improves range, accuracy, and fps.
Durable, hence it being 60 degree
A true upgrade, actually improves performance
Includes 2 buckings and 2 spacers for only $11
Helps prevent against double feeding issues
Amazing with a madbull 6.03
You need to lube it generously
May need cutting down (mine didn't)
Might need a break-in period so that it gives enough hop
Might put you over field limits in terms of FPS "These bucking's plus the fishbone spacers are totally worth it.
Easy installation if done right
increased FPS (my .25 go straight up in the air now)
Will have to cut some of the bucking off at the end in order to fit barrel lock on(don't force it like me, ended up having to take a zip tie to my now broken barrel lock)
P.S. you may have to get heavier bb's due to the major FPS increase "Alright I put this in my softair thompson M1A1 but it took over an hour. It does improve feeding, fps, and range but it had an impossibly tight fit in my hop-up unit. I had to cut off part of the end in order to make it work. Also the spacer was too wide to fit so I had to do extensive modification to make that fit. Once in place though it works great. Do not be discouraged by my troubles it was probably just the irregularities of the thompson. "Great buckings, they have a tight fit in nearly all my hop units. Strange.
Besides that they are great
Cheap ($6 a pop)
Tight fit. You may need to fiddle with it. I ended up just clipping a bit off of the end to get it to fit better "This is a great bucking for any airsoft gun. My gun shoots 438 fps at 28rps and this bucking keeps a consistent grouping at 100 plus feet. I would reccomend this bucking with a 6.03 tbb for a quick fps, range and accuracy boost.
-Strong bucking that dosn't rip easily
-Increases accuracy, fps, and range
-None "these are great hop up buckings, i use these in my A&K SR-25 and in my JG M4. they made my SR-25 deadly accurate and boosted the FPS of my M4 almost 50 FPS! for 12 bucks its a steal for 2 buckings and 2 fishbone spacers. do not hesitate to buy them if your looking for an accuracy and FPS boost for cheap "These are the best buckings sold period! They improve shot grouping, distnance and fps and are much more adjustable than any stock or other buckings. The air nozzle seal in very good as well. I use these buckings in all of my guns and my team mates guns. "Installed the Shark and Fishbone today on a L85. Had it apart,replaced and assembled in about 20 minutes *pats self on back*. Also installed a Madbull Psg1 barrel and Zombie killer mock silencer. So not sure if its the bucking or the barrel, but it dose group very well. and don't look half bad. i plan to install the second shark and fishbone in a Jing Gong Aug*crosses fingers*. Along with a Matrix 120 spring and a Tenergy 9.6 2300mAh. More on that later. Thank you Evike, cant wait for it to get here. peace and fry bread grease. "these are good hop up buckings. i put one wiht a systema hop up and the other wiht a G&G hop up. both fit fine. idk by how much but they do make your groupings a little better. over all i would buy these over any other buckings. "this is a very good hop up bucking unit. i have no idea how it works though when firing. i got my gun and the bucking broke, i sent it to evike and they replaced it with the crappy guarder bucking that ripped after a while. I was tired of the crap so i thought id buy the madbull bucking because madbull has good quality products. whenit came i got excited i put it on my barrel and tried to install it. **************************7 it wouldnt fit in the DBOYS M16 mod 0 hop up unit and i was like TIHS (mirror). i dialed up ol evike and they told me that the 60 degree hop up bucking was a tiny bit too thick for my hop up unit and that i should get the G & P hop up. the G & P looks nice but YAY more shipping costs and waiting.....by the way the RED 60 degree shark bucking is very nice and is very duarble. in my efforts to make it fit (I was unsucksesful) but hey i didnt rip it like that crappy Guarder junk. Displaying
1 to 12 (of 12 reviews)
Back to Product Page
Write a Review