Contact Us (626) 286-0360 Store Locations
Extended Phone Support Hours 7am-7pm PST
Browse by Type or Category
Airsoft Season! SAVE 18% with coupon code: SUMMER2018 (Exclude MAP and SALE Items)

Matrix SPR MOD-0 DMR Fiber Quad Handguard Set for M4 M16 Series Airsoft AEG

10 Customer Reviews

by Mangquell H. on 04/09/2018
"Just got mind installed itís a beauty. Not recommended to fellas or gals who are not strong enough to lug around 10lbs for several hours, as it is completely front heavy being itís made of steel. Overall very pleased with my buy.
by Christopher W. on 05/10/2015
"Got this for my We-Tech M4. Fits great after walking the barrel nut (real steel threads vs AEG). Didn't use the barrel though obviously, although I could have modified the barrel I suppose. Anyways It's sturdy and heavy, both a plus and a negative.
by Josh K. on 02/25/2013
"Great kit for the price IMHO
Installed on my custom 500fps TM m4

Externals I have on my TM M4
G&P Zombie Lower
PTS Motor Grip
This Kit,
Shorter outer barrel
Tucked suppressor (Element Blackside)

Paired with my own 480-500fps gearbox, a decent 3-9x40 scope or an EOtech with a 3x Magnifier, this kit rocks
I decided against installing the front flip up sight because, if youre gonna have an SPR Kit, you run your own optics.

Looks sweet
Price isnt that bad
Rails at the end for a bipod/Surefire/Laser.
Installing on a new upper is easy. As long as you dont have a Delta ring, just the upper with threading.
Makes your gun really look like a SPR.

Heavier than I thought. Easily adds 2.5-3 lbs to the gun.
For some reason, my rear sight doesnt lock in the down position anymore. I usually use my EOtech or Scope on a riser, but whatever.
Some people may say its a bit pricy...

Really like the kit
by Derrick H. on 09/23/2009
"I have not installed it yet, but looks pretty simple. finish on it is great.
by Zach B. on 03/31/2009
"Great quality, all metal construction, and amazing looks.
I have heard many people say that the Mod0 is ugly. Personally, I beg to differ. This looks amazing.
I was very surprised when I saw that the flash hider had no orange tip. It was actually a relief to me, because I had planned to buy a new flash hider in the near future because of the orange tip that I thought this one would have. Saved me a good $50.

The construction is full-metal, and very solid.

The only downside is that there are no instructions. I've been playing airsoft for a good while now, but this is my first conversion kit, and even though most of it is pretty self-explanatory, there are a couple of things that I really have no idea where to put. I'll figure it out eventually, but it just would have been nice to have some instructions.

For $100, you can't go wrong with this kit.
by mike r. on 09/11/2008
"i ordered this kit for my m16 and its awesome it was a pain in the ass to get the free float right but it looks great the only down side is i had to take out my tight bore because it was to long for the barrel and the m16 barrel was to heavy for the free float but i was surprised when it got hear that it had a black flash hider instead of and orange one and the flash hider is really cool you can take off the ring near the front to put a large mount suppressor on it or you can can unscrew the outer part of the flash hider and theirs a socom silencer thread on it the flip up sights are nice to since i don't have a scope yet
by Nicholas H. on 07/19/2017
"Its been a little while since I bought the kit, but I thought I'd share. The design in simplistic (which I like) and the construction is good. The kit can be a little front heavy, but after all it is full metal (bi-pod recommended). The only problem I had was that it didn't come with a rear iron.
by Victor R. on 04/24/2012
"I bought this kit to replace the hand guard on my ICS m16. It did not come with instructions although i must say that they aren't needed to install this kit. The new look that it gave my gun far out weighs the added weight. I have had this kit for about 6 months

I'm giving it 4 stars because the paint chips off way too easy. I like battle scars but not when any little thing can dent the paint. On top of that the threads for the screws wear down way too easy. Once you figure out the configuration you want leave it like that because:
1. the threads my become worn down way too much if you constantly move the rails
2. the paint may chip off the hand guard under the rails
3. mounted accessories will chip paint off of the rails

Like I stated before, I like battle scars but I don't love the fact that It is exposing the metal and speeding up the rusting process. On that note, I have yet to spot a hint of rust.
by Jake c. on 04/03/2017
"I have had this kit for a few months now, I have tried two different upper receivers and the barrel nut wont thread on. One is a G&P and the other Im not sure.

Over all I like the kit. Would be nice if I could fit it on my M4 though.

Ive looked for other barrel nuts but havent found any online to fit with this kit.
by Zachary N. on 08/21/2013
"Bought it a few months ago to mount and finally get some external upgrades running on my G&G CM16 Raider. The Package I got looked pre-used, as it had some light scratches and other minor defects, and Evike forgot to send a Gas Tube with my Kit. The Rear Sights' adjustment knob broke off after about a month, and the paint chips easily. I also had a screw get stuck for one of the rail pieces, got stuck in there badly, ended up stripping and I had to actually drill the screw out with a 1000watt drill. (Tough as nails screws, I'll give it that). The Screws holding the PRI top rail though can be difficult, and one seemed to be stripped when I got the kit. After a while of fiddling and some thread-lock glue it holds fine.

However, The kit LOOKS great, adds great feel to your Ego-Extender Rifle (DMR).

Looks good
Great weight (For milsim junkies)

Came "used"- (Might not be like that for others, idk)
Stubborn to install onto a rifle, no instructions
Cheap/finicky Rearsight

For what it's worth though, I like it a lot despite all the issues it seems to have for me. 3/5.