1 to 12 (of 23 reviews)
"These mags work great with my KWA g36. They are really snug, absolutely no wobble. The only reason I knocked off a star is because 2 out of the 3 mags had a weak spring so I have to smack it a bit to get it aligned. Also the nub on the top to release the bb's is flush with top of the mag so it's really hard release the bb's. Other than that, they are great. Definitely recommend
They work with KWA
Fit snug in the magwell
Hit or miss with the spring quality (but that's with any mid cap in my experience)
BB release nub thing is hard to use "Great Magazines! they feed greatly in my g36. I absolutely love them!
only a couple problems though,
one of the magazine tabs just dropped right out of the side. so i can not connect magazines together.
second, i dropped one on wood flooring and the the little tab receiver part just snapped off.
and lastly, one odd day at the field, i went to chrono with one of these mags and it just stopped feeding. Not a jam or anything, the bbs just would come out. i left it alone until i got home and then attempted to unload the magazine by holding back the release and holding it upside-down... thats when i found the problem- for some reason, a rubber o-ring cam flying out.. and that was the end of the mag.
but please do not let these keep u from buying these!
they work absolutely amazingly. highly recommend. "They fit fine in my JG before and after modding. Overall i highly recommend these mags because they are cheap and I can unload a whole mag at 22rps without a single mis-feed. I 100% recommend these if you are looking for good midcap magazines for your G36. "i have 3 highcap mags and i want to no if i should buy a couple of these just cause u dont have to wind them, and are they made out of plastic too?
Webmaster: Yes they are made out of plastic and I would suggest using mid caps for realism. "These mags are great I just got 2 of them yesterday and they hold between 125-135 BBís but you will have to load and unload them 3 or 4 times before they hold that much and I havenít had any misfeeds in the few thousand shoots Iíve taken with them. "First, I will start off by saying these are AMAZING!!!!!!
I ordered these primarily because of the price and then read some of the negative reviews (there aren't many) and became kind of hesitant.
I read up on all of the positive reviews and figured it wouldn't hurt to try it. Worst case, I'd just return them. Well...no need to return them now.
As soon as I got these in yesterday I took the mags apart and used some airsoft silicon spray that I ordered off another website. First, I unscrewed the bottom (hex screw) and then removed the middle portion that houses the spring. On the housing, there's only ONE screw at the top where the bb's are fed through (middle screw) that needs to be removed. Once you do that, the top will pop off because of the spring being under tight pressure. Just hold the top while you're unscrewing the middle screw.
Slowly raise the lid and the spring will come out (it doesn't really shoot out that fast). The spring is pretty tough so it's hard to bend it or break it but still be very careful. I shot a little silicon spray down in the chamber where the spring feeds and then fed the spring back through using both of my fingers. One hand pushing the spring in, the other hand slowly holding the tension back.
Took me all of 5 minutes for each mag. Loaded up about 100 bb's in each (I tried to shove the advertised 140 but I think I need some more time to break the spring in) and tested them in my Umarex H&K G36KV AEG blow back and each bb fed perfectly. Not one misfire or mishap.
On top of that, they really don't make any sound when you shake them after loading, just as advertised. Makes it that much easier for me to run around without bbs shaking all over the place giving away my position. Sneak attack son!
I am extremely happy. "Probably some of the best Mid-caps I've ever bought. They feed flawlessly. They fit great into my Custom/JG/ Echo 1 G36. These are the result of putting silicon oil in the the mag feeding tube before use. But after that, you shouldn't have a problem.
5/5 Just plain amazing. "Purchased for use in the Ares G36KV.
Mags are solid construction of polymer but feel quite sturdy, with no wobble.
Gun feeds about 95% of the mag without issue, last 5% takes some fidgeting but is usual for airsoft mags.
Over all good buy if you want to maintain true to the G36 and don't want to go with the Magpul P-Mags "I've only had these mags for a day, but I am very pleased with them already.
They all feed well.
No winding (I hate winding Hicaps!)
Fit my ARES G36C. (Which happens to be picky about magazines, it can only take these)
They aren't very expensive.
You don't have them! "I have purchased these for my Golden Eagle G36C.
When I got these (ordered 2 of them), I loaded them with my CYMA speed loaders (120+ rd capacity). They misfeeded, but after unloading them (with help of a stick), I sprayed silicone oil down the feed end and they function flawless! Full, semi, they work! These are great when a wind-up mag is not part of the game! No rattle plus higher capacity than standard mags! Gonna order a few more! Just remember to lube them! "These are great midcaps. I just bought three of them for my KWA G36c. I was a little disappointed at first because they came in DBOYS packaging and did not lock into the magwell but after a little modding and lubing they locked firmly into the magwell and fed fine. I recommend spraying some silicon oil into the mag before loading it or you may have to manually unload each bb. If you buy these for a KWA then you will have to file a tiny bit off the back of the mag to get it to lock into the magwell. It took me about ten seconds of filing on each mag to get them to lock into place. They fit fine in my JG before and after modding. Overall i highly recommend these mags because they are cheap and I can unload a whole mag at 22rps without a single misfeed. One thing to note is that they only hold 115 rounds but thats not really a problem. I 100% recommend these if you are looking for good midcap magazines for your G36. "I bought these magazines awhile ago and cant be more happy with what i bought. Yes it is true they do need much breaking in, but after they performed perfectly, not breaking or becoming stuck once.
Overall best magazines for any G36C they fit Displaying
1 to 12 (of 23 reviews)
Back to Product Page
Write a Review