1 to 12 (of 26 reviews)
"NO WOBBLE, SECURE fitment, I highly recommend this tactical rail system for anyone who wants to add grips, lasers, lights, sights or anything else to the end of their m4 airsoft rifle!
*Just make sure the delta ring is fully depressed before installing the TOP piece (3rails on it) -its a tight fit, but it WILL fit (I installed it with no tools). The second piece basically slips in and is secured with the hex screws. Also, the end of this RIS rail hand guard that is closest to the flash hider, fits on TOP of the hand guard cap instead of inside it like most of the plastic m4 handguards do.
-NO WOBBLE (no side to side movement), NO front to back play- This thing is SOLID!!!
-rubber hand grips are a harder rubber, which helps to securely install them on the rails
-numbered rail positions- for those who switch out attachments and still maintain consistency with their sights or grips
-NONE "Great rail system! Great quality metal. This rail system is a very good rail system for the money AND comes with rail hand guards!! The rails can be sharp at some places but that is what the hand guards are for. Very stable. Its a very tight fit on my King Arms m4 GBBR.
Price point is amazing!!
Comes with hand guards
Don't over tighten screws!
Hard to get on
Get this rail system!!!! It is absolutely amazing!!! "I bought this for my KA M4A1 Ultra Grade. It was really hard to install but it has ZERO wobble. What can I say it does its job. Also the Rail covers it comes with don't fit.....
does its job
comes with rail covers
hard to install
rail covers don't fit "I got this rail system yestarday, and I quite like it!
Though it was a bit hard to get on, I had to use a screwdriver and a hammer to get it in place, but now it fits perfect!
No wobble at all!
-Comes with 12 comfortable rail covers
-A bit hard to get on
-Wouldn't fit in the delta-ring without a bit of force.
Overall a great rail system "just got this the other day for my G&G CM16 GBB, i read in one of the earlier comments that it "doesn't fit G&G Combat Machines without mod", however the only issue i encountered was a little difficulty getting it to fit around the inside of the delta ring, but with a little bit of force, i got it on. Its a real snug fit, but its just that, it fits. The RIS itself is pretty good quality, full metal, so it adds a bit of weight to the front end but nothing too bad, all in all im satisfied with this product. in my opinion, good purchase. "this is an excellent rail system.
rubberized rail covers
doesnt fit on G&G Combat Machines without mod.. "Fits a King Arms M4 perfectly. Finish is alot better than how it looks in the photo. Seems like a good buy for $55.00 "Received this today with my Evike.com order. Looks great, has very durable construction, and really is real steel.
If you're worried about durability, worry no more. I put this rail system on my REAL 6.8SPC LWRC M6, and fired 360 rounds. Afterwards, the rails still had no wobble AT ALL. They were a bit warm, but that's to be expected. If the recoil of the 6.8SPC fired 360 times didn't shake it loose, I'm pretty sure playing airsoft won't.
Came with 12 rail covers, and for $55...good luck finding anything better. "Great quality and finnish. Note this is a REAL STEEL rail so all the reliability is there but you may have problems putting it on. This is built to the specs of an AR-15, so if your gun is slightly out of spec, you may have trouble and may have to modify your gun/rail to get it on. Other than that a great buy, and resonably priced considering the quality. "I bought this for my Matrix M4 challenge kit and had a very difficult time putting it on. It was a tad to long so the delta ring is pushed up against the upper reciever so it is not coming off any time soon. When attaching the RIS system make sure to line the screws on the left and right of the barrel cause if its on the top and bottom some vertical grips or attachments wont slide on. Overall not a bad buy and It is good quality. "The very first RIS conversion that fits into your gun in less than a minute. It needs no work/disassembly/experience to put this one in. I've been working with RIS conversions for a while now, and I've finally found one that is best so far.
Of course you have to have a PEQ box to fit the battery in and do a little bit of wiring fix to fix the battery in there, but once you've got that nailed out, you're good to go.
The rail is very sturdy and good quality. I dropped it on purpose to see if it'll break, and no, it held on good. It also withstands great abuse with a vert grip on. Get a better rail cover though, not a fan of the covers that came with it.
Highly recommended. Fits my KWA M4A1 real nice as well as my G&G Combat Machine. "Awsome rail system. I got it in the mail, and was liked it instantly! the quality of the metal is very satisfying and unexpected for the price. my only word of advice is that you be VERY careful with how tight you make the screws unless you WANT to mess up your handguard cap. Also be careful with the rail covers you select if you don't like the ones it comes with. It is very sturdy and is perfect for people that love customizing their M4's. It comes with 12 rubber rail covers that you see in the pic.
Number marked rails
Includes necessary alen wrench needed for installing
Feels good to the touch
Fit perfectly with my M4
Sharp rails (they can and WILL cut you if your not careful, I got cut by them)
Final analysis, Great for those that like to get the authentic look and feel on their guns. Very strong, sturdy, and durable. Perfect for airsofters, and its A GREAT DEAL FOR THIS PRICE! It's a five star MUST! Displaying
1 to 12 (of 26 reviews)
Back to Product Page
Write a Review