Contact Us (626) 286-0360 Walk-In Superstore Daily Deal
New Phone Support Hours M-F 8am-5pm PST
Browse by Type or Category
MARCH MADNESS - 25% OFF (exclusions apply, see details)   Use code: MARCHMADNESS

Angel Custom G2 SUS304 Stainless Steel Precision 6.01mm Airsoft Sniper Rifle Tightbore Inner Barrel (Length: 630mm KJW M700)

15 Customer Reviews

by Mae S. on 03/21/2016
"This barrel works very well with the utg l96 stock hop up chamber. It is polished very well with perfect smoothness and increased my groupings at 100 ft by two inches over the stock brass inner barrel. I also would like to say the material this barrel is made out of (sus304 stainless steel) is very high quality stainless steel and will not bend. If you are looking for a new barrel for your stock l96 hop up chamber, this is the barrel for you.
by Christos D. on 12/24/2015
"Very happy with this product. You will have to clean it frequently. If your accuracy begins to decrease, you need to clean the barrel.

I typically do not purchase Angel Custom parts. I've had very bad experiences with their cylinder sets, pistons, and springs. But their barrels appear to be made well.

I hate to admit it, but Angel Custom manufactured a great internal component. Go for it!
by Steve G. on 12/19/2014
"I've got a few AC Barrels in my guns, and I'm really happy with them. I had one that got sent to me with a blemish on the inside that was shooting wonky, but Evike issued an RMA and replaced it quickly.

I currently have this in my M4 AEG and I can easily plink people off at 200' (Gun is shooting about 415 FPS). I have hit targets farther, but I've had to arc a little bit.

I've got an AC 500mm in my SR-25, and another AC 500mm in my L96. I can hit the fence in my back yard at 290 feet with both of them.

Really solid barrels for the price,
by Tyler L. on 07/24/2014
"Installed this in my JG BAR-10. Works great!
by will t. on 05/14/2014
"T'is a swell barrel. Its really hard to tell how good or bad it is when the HOP UP IS SUCH RUBBISH(this is not the barrels fault)!! But I can't really tell a difference in accuracy, (because of hop up) but i'm sure it would be better than stock barrel, so this isn't so much a review, but more of a reassurance to you that someone else bought the barrel. Its good but the stock hop up isn't. Buy it if you want, but its not mindblowing.

Pros:
~Its silver

Cons:
~Shrek has not approved of it YET

(Shrek hadn't approved it as of 5/14/14)
by william c. on 05/24/2013
"so if you own a kjw m700 you need this im using mad bull .43gram bbs this tightened my groups up by about three quarters. the barrel i received had some superficial scratches but it shoots true and if you get a tightbore get a good bucking like nineball or kingarms if you can find it. ps if you can make an h hop for your gun do it !!
by Booligan A. on 12/19/2012
"As you can see (from my ASR review), the grouping tightened up substantially with the Angel barrel vs. the stock bore barrel. At short range, most of the deviation is from top to bottom, with side to side being quite tight. Grouping size with the Angel TBB was about 2.9, with the stock barrel being closer to 5.

Overall, you can see that the performance was greatly increased across the board using the Angel 6.01mm tightbore barrel. I saw an increase in velocity, consistency, usable range, and precision. For the price, this thing gave me one of the best bumps in overall performance that I've seen.

Pros:
Noticeable increase in range, precision, FPS, and consistency
Great price - $32-$53, depending on length
High quality stainless steel construction
6.01mm inner bore


Cons:
Must use very high quality ammo with this barrel, however, you should be using good ammo anyways.
Tighter bore barrels require frequent cleaning to prevent jams. (From Evike.com: Matrix, EVIKE, KSC, Marui, WE, G&P, Excel BBs recommended.)
News from Angel Custom: VSR-10 / APS2 / Type96 / SVD / M24 / GBB TB Barrels coming soon.

Overall:
Angel Custom has produced a few products recently, and if they're half as good as their inner barrel, they are going to be a force to be reckoned with. This thing is extremely well made, and gives you real, measurable performance increases across the board. It is easy to install, inexpensive, and gives you more useable performance for skirmish use. I'm very excited to see what else Angel has in store for the airsoft market!
Many thanks again to Evike, and of course, Airsoft Retreat!
by Booligan A. on 12/19/2012
"As you can see (from my ASR review), the grouping tightened up substantially with the Angel barrel vs. the stock bore barrel. At short range, most of the deviation is from top to bottom, with side to side being quite tight. Grouping size with the Angel TBB was about 2.9, with the stock barrel being closer to 5.

Overall, you can see that the performance was greatly increased across the board using the Angel 6.01mm tightbore barrel. I saw an increase in velocity, consistency, usable range, and precision. For the price, this thing gave me one of the best bumps in overall performance that I've seen.

Pros:
Noticeable increase in range, precision, FPS, and consistency
Great price - $32-$53, depending on length
High quality stainless steel construction
6.01mm inner bore


Cons:
Must use very high quality ammo with this barrel, however, you should be using good ammo anyways.
Tighter bore barrels require frequent cleaning to prevent jams. (From Evike.com: Matrix, EVIKE, KSC, Marui, WE, G&P, Excel BBs recommended.)
News from Angel Custom: VSR-10 / APS2 / Type96 / SVD / M24 / GBB TB Barrels coming soon.

Overall:
Angel Custom has produced a few products recently, and if they're half as good as their inner barrel, they are going to be a force to be reckoned with. This thing is extremely well made, and gives you real, measurable performance increases across the board. It is easy to install, inexpensive, and gives you more useable performance for skirmish use. I'm very excited to see what else Angel has in store for the airsoft market!
Many thanks again to Evike, and of course, Airsoft Retreat!
by Booligan A. on 12/19/2012
"As you can see (from my ASR review), the grouping tightened up substantially with the Angel barrel vs. the stock bore barrel. At short range, most of the deviation is from top to bottom, with side to side being quite tight. Grouping size with the Angel TBB was about 2.9, with the stock barrel being closer to 5.

Overall, you can see that the performance was greatly increased across the board using the Angel 6.01mm tightbore barrel. I saw an increase in velocity, consistency, usable range, and precision. For the price, this thing gave me one of the best bumps in overall performance that I've seen.

Pros:
Noticeable increase in range, precision, FPS, and consistency
Great price - $32-$53, depending on length
High quality stainless steel construction
6.01mm inner bore


Cons:
Must use very high quality ammo with this barrel, however, you should be using good ammo anyways.
Tighter bore barrels require frequent cleaning to prevent jams. (From Evike.com: Matrix, EVIKE, KSC, Marui, WE, G&P, Excel BBs recommended.)
News from Angel Custom: VSR-10 / APS2 / Type96 / SVD / M24 / GBB TB Barrels coming soon.

Overall:
Angel Custom has produced a few products recently, and if they're half as good as their inner barrel, they are going to be a force to be reckoned with. This thing is extremely well made, and gives you real, measurable performance increases across the board. It is easy to install, inexpensive, and gives you more useable performance for skirmish use. I'm very excited to see what else Angel has in store for the airsoft market!
Many thanks again to Evike, and of course, Airsoft Retreat!
by Booligan A. on 12/19/2012
"As you can see (from my ASR review), the grouping tightened up substantially with the Angel barrel vs. the stock bore barrel. At short range, most of the deviation is from top to bottom, with side to side being quite tight. Grouping size with the Angel TBB was about 2.9, with the stock barrel being closer to 5.

Overall, you can see that the performance was greatly increased across the board using the Angel 6.01mm tightbore barrel. I saw an increase in velocity, consistency, usable range, and precision. For the price, this thing gave me one of the best bumps in overall performance that I've seen.

Pros:
Noticeable increase in range, precision, FPS, and consistency
Great price - $32-$53, depending on length
High quality stainless steel construction
6.01mm inner bore


Cons:
Must use very high quality ammo with this barrel, however, you should be using good ammo anyways.
Tighter bore barrels require frequent cleaning to prevent jams. (From Evike.com: Matrix, EVIKE, KSC, Marui, WE, G&P, Excel BBs recommended.)
News from Angel Custom: VSR-10 / APS2 / Type96 / SVD / M24 / GBB TB Barrels coming soon.

Overall:
Angel Custom has produced a few products recently, and if they're half as good as their inner barrel, they are going to be a force to be reckoned with. This thing is extremely well made, and gives you real, measurable performance increases across the board. It is easy to install, inexpensive, and gives you more useable performance for skirmish use. I'm very excited to see what else Angel has in store for the airsoft market!
Many thanks again to Evike, and of course, Airsoft Retreat!
by Kimberley F. on 04/25/2013
"Ok, this barrel is a very high quality one and is well worth the money. But there is one small problem that I experienced. If you buying this piece for an MB03 rifle, you'd have to be willing to make some modifications to possibly your gun. The barrel itself came up a little short, thus allowing for it to not come in contact with the barrel centering device. Though it does say in the description it is made for the MB03, it does exclude the exception of making modifications. All in all, don't make the mistake I made and maybe take time to measure your original barrel before replacing it with a new one.
by Garrett C. on 05/25/2016
"The first thing to note if you are planning on putting this in your VSR-10, is that they expect you to also buy the Angel Custom hopup for the VSR-10 that allows it to use AEG inner barrels. Yes, this is an AEG inner barrel, you have been warned.
So, not knowing it was an AEG inner barrel, i got it for my VSR-10 and tried installing it. I had to modify the hop up a bit, but i finally got it to work. It felt like the gun was shooting better when I had the barrel installed, but when I went to the range and chronoed, it halved the original FPS. Yes, a 200 FPS decrease.

So 1/5 for VSR-10 install.

However, I installed it into a m4 build and it had great results. I don't have a different barrel to test it against but with an m130 spring and a bore up kit, this gun was shooting over 200 feet.

For AEG, 5/5
by Josh R. on 11/28/2015
"So I decided not to listen to the last review because I thought maybe he missed a spacer or something and got this for my SW M24 and it 100% does NOT fit. In fact it's about an inch too short. I got angel custom spacers and they didn't work eithe . If I measured correct the inner barrel is 520~522 mm I could only find one online, and that's at redfox airsoft. I'm sure it's a good barrel, just not for the SW M24
by Mark K. on 05/10/2016
"This barrel is bad. I do not recommend it.

I have two Kc02's. Both of them are set up slightly different, however the hop up is pretty much the same. Both of them are running FE 70deg hop up buckings and barrels around the same length.

The gun with this barrel in it was outperformed by the stock setup. The FE70 with the stock barrel gave me another 60 feet of range over this so called "Sniper rifle barrel".

I would not recommend this barrel at all. In fact, I will never be purchasing another Angel custom part as this is my second issue with the brand.

The RA-tech barrel is far better. In fact, my other gun (which has the RA 380mm barrel) outshoots this one by a good 125ft.
by Ryan M. on 02/09/2015
"Decent quality, but terrible bore. A clean stock barrel will perform better than this, although this is made of a better material. If you want a good sniper barrel get a pdi 6.08 455mm barrel. That is the most accurate barrel you will find. That combined with a pdi v2 hop up and g&g green bucking, er hoped of course. Will get an unbelievably accurate rifle. Also, even though this has nothing to do with the barrel, just because some bbs are labed high quality doesn't mean they are. Use bb bastard or goldenball. Just stay away from those terrible elite force bbs. PLZ.