Contact Us (626) 286-0360 Walk-In Superstore Daily Deal
Extended Holiday Phone Support M-F 7am-6pm PST
Browse by Type or Category

Angel Custom G2 SUS304 Stainless Steel 6.01mm Sniper Rifle Tightbore Inner Barrel (430mm / VSR-10)

5 Customer Reviews

by Christos D. on 12/24/2015
"Very happy with this product. You will have to clean it frequently. If your accuracy begins to decrease, you need to clean the barrel.

I typically do not purchase Angel Custom parts. I've had very bad experiences with their cylinder sets, pistons, and springs. But their barrels appear to be made well.

I hate to admit it, but Angel Custom manufactured a great internal component. Go for it!
by Tyler L. on 07/24/2014
"Installed this in my JG BAR-10. Works great!
by Booligan A. on 12/19/2012
"As you can see (from my ASR review), the grouping tightened up substantially with the Angel barrel vs. the stock bore barrel. At short range, most of the deviation is from top to bottom, with side to side being quite tight. Grouping size with the Angel TBB was about 2.9, with the stock barrel being closer to 5.

Overall, you can see that the performance was greatly increased across the board using the Angel 6.01mm tightbore barrel. I saw an increase in velocity, consistency, usable range, and precision. For the price, this thing gave me one of the best bumps in overall performance that I've seen.

Noticeable increase in range, precision, FPS, and consistency
Great price - $32-$53, depending on length
High quality stainless steel construction
6.01mm inner bore

Must use very high quality ammo with this barrel, however, you should be using good ammo anyways.
Tighter bore barrels require frequent cleaning to prevent jams. (From Matrix, EVIKE, KSC, Marui, WE, G&P, Excel BBs recommended.)
News from Angel Custom: VSR-10 / APS2 / Type96 / SVD / M24 / GBB TB Barrels coming soon.

Angel Custom has produced a few products recently, and if they're half as good as their inner barrel, they are going to be a force to be reckoned with. This thing is extremely well made, and gives you real, measurable performance increases across the board. It is easy to install, inexpensive, and gives you more useable performance for skirmish use. I'm very excited to see what else Angel has in store for the airsoft market!
Many thanks again to Evike, and of course, Airsoft Retreat!
by Garrett C. on 05/25/2016
"The first thing to note if you are planning on putting this in your VSR-10, is that they expect you to also buy the Angel Custom hopup for the VSR-10 that allows it to use AEG inner barrels. Yes, this is an AEG inner barrel, you have been warned.
So, not knowing it was an AEG inner barrel, i got it for my VSR-10 and tried installing it. I had to modify the hop up a bit, but i finally got it to work. It felt like the gun was shooting better when I had the barrel installed, but when I went to the range and chronoed, it halved the original FPS. Yes, a 200 FPS decrease.

So 1/5 for VSR-10 install.

However, I installed it into a m4 build and it had great results. I don't have a different barrel to test it against but with an m130 spring and a bore up kit, this gun was shooting over 200 feet.

For AEG, 5/5
by Ryan M. on 02/09/2015
"Decent quality, but terrible bore. A clean stock barrel will perform better than this, although this is made of a better material. If you want a good sniper barrel get a pdi 6.08 455mm barrel. That is the most accurate barrel you will find. That combined with a pdi v2 hop up and g&g green bucking, er hoped of course. Will get an unbelievably accurate rifle. Also, even though this has nothing to do with the barrel, just because some bbs are labed high quality doesn't mean they are. Use bb bastard or goldenball. Just stay away from those terrible elite force bbs. PLZ.