- Stamped metal receiver
- Steel outer barrel w/ steel flash hider
- Riveted receiver
- Top RIS mounting rail for attachable accessories
- KTR style full metal front sight
- Steel folding stock
- Side mount for AK compatible scopes and optics
- Metal TM spec gearbox with reinforced internal parts
700mm - 900mm (Folded / Extended)Weight:
500~rd Hi-Capacity. Works with Matrix, G&P, Tokyo Marui and other compatible AK Series Airsoft AEG MagazinesMuzzle Velocity:
380~400 FPS (Measured with 0.20g BBs)Thread Direction:
Ver 3 Full Metal, Fully UpgradeableMotor:
Short TypeFire Modes:
8.4v 1600mAh Small Stick Type / 7.4v LiPo recommended (Wired to top w/ small Tamiya)Hopup:
Yes, AdjustablePackage Includes:
Gun, Magazine, Manual, 7.4v LiPo Battery, LiPo Smart Charger, LiPo Safe BagManufacturer:
CYMAThings you may need to get started:
Battery and Charger – Required to power your AEG; use a high quality battery and charger for best results.Spare Magazines – Stay in the fight longer by bringing more ammo with you.BBs – High quality precision 6mm BBs recommended; Use 0.20g – 0.25g BBs for best results.Silicone Oil – Basic cleaning and lubrication maintenance help keep your Airsoft AEG in top working order.
CYMA is among the oldest, most experienced and the largest Airsoft manufacturing facility in the world. Known for their unmatched quality control and professionalism, CYMA is selected to be the OEM of a vast amount of Airsoft products. Durability and performance meets affordability!
FPS Range: 380-400
(Write a review)
"This is a great gun for anyone. beginner to pro. Shooting 426fps on .2g bbs out of the box for me. Has a metal hop up unit which is great . Battery chamber is a little tight but still fits a 9.6 stick . mag well is not the best, it holds the mags in with no wobble but must be placed in just right to lock in place. nice weight and sturdy feel. stock locks great and has almost no wobble. (this is my second ak-74 stlye rifle from CYMA and both preform great)
great range, and decent grouping. I through a scope on and was sniping kids all day
"First off, this gun is well-built. I've heard a lot of good things about newer CYMA guns and components, and this one doesn't disappoint. It's got a stamped steel body and stock that is very hefty where it counts. You could literally run over this thing with a car and it'd likely still be intact. Stock and barrel are also steel, but the rail system and removable metal pieces like the sights look like pot metal, albeit decent pot metal, Handgaurd, and handgrip are good quality plastic. Mine came with some barrel wobble, which can be fixed by tightening an allen key. Handgaurd was also pretty loose. I stuffed some foam in with it to tighten it up. The stock is also quite loose. Applying a few layers of tape or maybe some JB weld where the front of the stock meets the body of the gun should tighten it up.
The internals are also pretty good. You'll get a lot of life out of this gun if you don't want to touch the internals. I can't say how things were before I re-shimmed the gearbox, but after, it sounds very good when firing. Cylinder seal wasn't very good though - the compression was very bad. The motor most likely uses neo magnets, as the magnets are several times stronger than the cheap ferrite magnet motors I have in my other guns. Rate of fire on a 7.4 V lipo is about what you'd expect. Not amazing but also not super slow. I think about 11-13 rps. Lastly, the accuracy is also ok. Not amazing but not terrible. Probably can hit a target accurately at 150 ft or so. But if you can, you should flat-hop or R-hop it. This is where things get less nice. The barrel is pretty good and the hop-up is pretty good, but getting the barrel out requires a complete disassembly of the outer barrel. That is, you must remove the front sight, the front sling mount/handgaurd bracket, the handgaurd, the rail system, the rear sight, and the outer barrel. To top it off, there is a plastic piece that holds the hop-up against the gearbox that must be removed along with two screws holding the hop-up onto another plastic piece. By comparison, removing the gearbox is much easier...
All in all, for the price, 5/5. Get it (or another CYMA AK) if you're on a budget and want a solid gun or one that you plan on turning into a powerhouse.
"first of all, BUY THIS GUN! Chronoed it right outta the box it shot 393 full auto 398 single shot. I love this gun. Bought a couple CYMA standard ak mags and they seem to feed just fine. The distance and accuracy are pretty solid. I was shooting a garbage can at about 150 ft and hitting its pretty consistently. The hop up is super easy to work with as well, dont have to take off gloves to adjust. I use a 11.1 lipo battery and have to take care putting the battery in, its pretty tight but it works great. I love this gun. Ive been playing airsoft for a long time and spent 300$ on m4 builds that promised great rates of fire, fps, and range but they all let me down after a couple uses. This thing is a beast right out of the box. I would buy this and any other cyma ak and for 150 bucks you cant beat the price. CYMA makes cheaper guns as well and im sure theyre just as good as this one. Overall im really happy with this buy. 5/5 stars.
Discuss about CYMA Stamped Metal AK-74 KTR w/ Folding Stock Airsoft AEG Rifle - (Package: Add Battery + Charger) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!