*Red dot not included
The Classic Army M4 ARS3S is an M4 with a 13" rail and an 14.5" outer barrel. The monolithic profile rail system has a standard picatinny configuration on all four side of the rail system, allowing for fitting of standard railed mounted scopes or other accessories. The gun features an ergonomic grip, flip up front and rear sights, and a retractable crane stock, and a sling adaptor plate. This gun comes individually serial numbered and comes with 2x 300rd metal high capacity magazines.
Internally, the gun has a 9mm bearing gearbox, wire cut steel 21:1 ratio gears, inline mosfet protected trigger contacts, stainless steel bore up cylinder, aluminum bore-up cylinder head, metal spring guide with bearing, 6.03mm tightbore barrel, silver low resistance trigger wiring, and a quick change spring system. The wiring utilizes a low heat deans plug and comes with an adapter for tamiya connector batteries. This gun is lipo-ready right out of the box. It will shoot 375-400 fps using 0.20g BBs and 800-900 rpm using a 9.6V battery. The quick change spring system allows for fast and easy spring changes without having to go into the gearbox.
- Durable metal alloy upper and lower receiver
- 13 inch metal RIS handguard
- Full length top rail is perfect for mounting optics or other accessories
- 7 handguard segments and one handstop included
- Ergonomic motor grip
- Front and rear flip-up sights
- 5 position retractable crane style stock
- 9mm version2 gearbox
- 21:1 ration wire cut steel gears
- Inline MOSFET protects trigger contacts
- 6.03mm tightbore inner barrel
- Wired with standard Deans plug, includes small Tamiya connector
- LiPo ready
- Quick change spring system
- Includes 2X 300 round magazines
660mm - 850mm (28.15"-38.19"), AdjustableWeight:
300rd Hi-Capacity. Works with Matrix, G&G, Tokyo Marui and other compatible M4 / M16 Series Airsoft AEG MagazinesMuzzle Velocity:
375-400 FPS (Measured with 0.20g BBs)Thread Direction:
Ver 2 Full Metal, Fully UpgradeableMotor:
Long TypeFire Modes:
9.6v Small Butterfly Type recommended (Battery not included. Wired to stock with standard Deans connector)Hopup:
Yes, AdjustablePackage Includes:
Gun, 2X Magazine, ManualManufacturer:
Classic ArmyThings you may need to get started:
Battery and Charger – Required to power your AEG; use a high quality battery and charger for best results.Spare Magazines – Stay in the fight longer by bringing more ammo with you.BBs – High quality precision 6mm BBs recommended; Use 0.20g – 0.25g BBs for best results.Silicone Oil – Basic cleaning and lubrication maintenance help keep your Airsoft AEG in top working order.
FPS Range: 380-400
(Write a review)
"I've had this gun for almost a week now and I can say that the gun is fantastic for what you pay for! For $280 your paying for a full metal body, front flip up sights(similar to Troy m4 sights) are decent and get the job, wonderful preformance straight out of the box( Up to 150ft-175ft with a .25 gram bb. Also the rate of fire is outstanding with a 9.6v and even crazier with an 11.1 lipo!
Now knowing the preformance of the gun, I'm also going to recommend some upgrading to certain components of the gun if you want to make this AEG even better and also this is where the criticism of the gun come in.
1.) Get a new hopup bucking. The one it comes with isn't the best
2.) The rail it comes with may come loose after using a couple of times so I would suggest you put some type of thread lock on the inner threads of the rail of by a new one(real speke keymod would be great)
3.) A new stock, the buttplate that the original one comes with is awful( at least in my opinion).
Overall,if your looking for a great preforming AEG that is under $300 I would 100% agree on your purchase of buying this AEG. The 3 cons that I listed aren't necessarily the worst problems, they are just some pet peeves I've had with the gun. The last thing I can say is that if you want this gun, don't hesitate just BUY it!
"Great looking and an ok shooting gun. Internals are ok not great, cylinder head is nothing to brag about, very light weight and thin. I had my gun and used it for 1 day at ballahack and the cylinder head nozzle snapped. Their choice for selector cams where a bad decision as well. The selector plate is proprietary so changing it out to change out the poorly designed selector cams is not an option. The gears seem to be made out of a strong steel material and the cylinder itself is ok. Piston and piston head are plastic, it does have a quick change spring system in it and a mosfet. If you never had to open the gearbox to replace the internals or change the spring it would be a good gun for a beginner. But because of theit choice of selector cams and selector plate design it's males it difficult to re-insert the gearbox into the lower receiver. I've broken 2 sets of selector cams just trying to put the gearbox back in the lower receiver. After calling it every name in the book I finally broke down and contacted Classic Army explained the situation and they paid for the shipping fee to ship it to them and fix it for free. I shipped it out about a week ago, still waiting to hear from them that they received it. Hopefully I get the gun back soon. Hope this helps!
Discuss about Classic Army ARS3S-13 Modular Rail Metal Airsoft AEG (Color: Black) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!