ID: 54686 (ACC-HSP-MP2x4)
Hover or touch above to zoom
Chest rig, pouches, magazines, and other accessories shown in images not included.
MAP ProtectedExempt From Coupons
*Chest rig, pouches, magazines, and other accessories shown in images not included.
Haley Strategic HSP MP2 Magazine Pouch Inserts - One Piece
The MP2 was designed around life support equipment; equipment that we need to get to fast when time is life. The MP2 inserts allow 30 round 5.56, 5.45, 7.62 and.308 rifle magazines to be run in open top nylon pockets, without bungies and without sacrificing retention of the magazine.The click-in design allows end users to insert magazines "bullets front" or "bullets back" and delivers a smooth draw of a fresh source without impacting the ability to quickly retain partial magazines in the case of a tac reload.Built specifically for the D3CR™ and D3CR-H™, the MP2 works with a variety of industry leading nylon magazine carriers including those made by Mayflower Research & Consulting, Velocity Systems, Extreme Gear Labs, LBT, First Spear and more.Designed and injection molded in the USA, MP2 inserts are available now, exclusively in Disruptive Grey™.
- Durable injection molded polymer construction
- Designed specifically for the D3CR & D3CR-H
- Compatible with open top pouches from many industry leading tactical gear manufacturers including Haley Strategic Partners, Mayflower Research & Consulting, Velocity Systems, Eagle Industries, CRYE Precision, London Bridge Trading, Tactical Tailor, Grey Ghost Gear, BAE Systems, Paraclete, and First Spear
- Retain rifle magazines in open top magazine pouches without bungee straps
- Faster access to magazines
- Easy to install non permanent modification
- Made in the USA
Injection Molded PolymerWeight:
5.56, 7.62 Rifle MagazinesManufacturer:
About Haley Strategic
Travis Haley is a veteran Force Reconnaissance Marine with 15 years of dedicated real world experience including: combat tours in Middle East, Africa and Central Asia. After leaving the military, Mr Haley served as a special operations and security contractor before partnering with Magpul as founder and CEO of their training division, Magpul Dynamics. Mr Haley also served as CEO of the parent company, Magpul Industries, before breaking off to form the endeavor that would become Haley Strategic Partners.
(Write a review)
"This is such an amazing product. I have been using the cheap Emerson JPC "clone" and I had to remove the bungee retention due to my mags being kinda short. The bungee would not retain the mag correctly, making it difficult to remove a mag with one hand. The only issue with this was excessive running caused my mags to bounce out of the pouch. I found these and ordered them right away. I was worried that they would come out with the mag, but these inserts stay seated. They give a good retention to the mags, as they don't try to escape my pouches anymore. I can hold my rig upside-down and the mags will remain in their pouch. I am ordering more for my chest rig, since these are so great.
"Nicely designed and are great for retaining my mags. I personally did not want to rely on the inserts solely for retention, so I kept the bungees on my D3CR. Just part of my OCD when it comes to losing my mags. The mags are not held in place with what I believe to be the perfect middle ground of retention. Not too sturdy but not too loose, and won't come out of the pouch with the magazine when pulled out with rapid force in a critical situtation. Overall, I would recommend these to anyone who owns a D3CR, or any other compatible magazine pouches. They do not hinder the user and only provide benefits.
10/10 get this, will be worth it.
"Order this four pack for my D3CR. A great insert and accessory for my rig. Holds magazines in pretty well without bungee retention. However I decided to leave my bungees on my rig just in case. Note, different magazines act differently in the inserts. I use my KWA LM4 and those magazines are held in pretty good, but can be difficult to take out due to the retention and the magazines steel shell being smooth. However over time, it appears to be getting easier, must need time to break in. While my real AR HEX magazines are not not as secure, yet can be pulled out pretty easily. Also, preforming tactical/retention reloads is much easier sense the inserts hold the pouches open a lot easier than they are usually without the inserts. The inserts stay in place during reloads and are not pulled out with the mag. This is due to the inserts pushing outward towards the front and back of the pouch, as well as a cutout that slides into the molle channel of rig. Overall, I would definitely recommend these inserts to any owner of the HSP D3CR. This provides an extra level of retention for your magazines so you don't lose them, without hindering or compromising your ability to reload and hold magazines. These also fit in other pouches made by other brands. These fit in my condor triple mag bungee pouches and staying in when I pulled out the mags. Again, these depends you just have to experiment. This is a great product made by a great company, give these inserts a try and make reloading under stress a easier experience. 10/10 way to go Haley Strategic!
Discuss about Haley Strategic HSP MP2 Magazine Pouch Inserts - Four Pack with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!