ID: 54087 (GB-KA-363)
Hover or touch above to zoom
King Arms Limited Edition Skull Frog Lower Receiver with 8mm Gearbox Front Wired (300mm)
A perfect base for any field gun build, the King Arms Limited Edition complete lower offers an easy solution to building up your own custom gun. The lower comes with one of King Arms time tested 8mm LiPo ready gearboxes, which provides 400 - 420 feet per second (depending on barrel length). To top off the high quality build of this lower, it comes with laser engraved Skull Frog trademarks, to give it an aggressive look.This gearbox is for use with 363mm+ inner barrel lengths
- LiPo ready
- 8mm pre-upgraded gearbox
- Front wired
2.68 lbsMagazine Compatibility:
Works with Matrix, G&G, Tokyo Marui and other compatible M4 / M16 Series Airsoft AEG MagazinesMuzzle Velocity:
400~420 FPS (Measured with 0.20g BBs)Gearbox:
Ver 2 Full Metal, Fully UpgradeableMotor:
Long TypeFire Modes:
FPS Range: 400-420
(Write a review)
"This lower is a great for building an m4, but it does have its down sides. Since its only $69 of course it has to have budget internals. I would recommend upgrading the internals with a new aluminum piston as the one it currently has had bad teeth resulting it to break after about 500 rounds. I also recommend you get another air nozzle as this one broke with a few Hop-up units due to it being plastic. The old Seal didnt have a O-ring resulting it to drop the FPS of the gun. I got the Matrix CNC Nozzle (ID: 32920) and it worked pretty nicely and raised the FPS about 15-20 more. After all these internal upgrades you will be spending about $95 in total.
Metal body is well made
Good Fire rate
Loud(con for some)
Weak Air nozzle
Selector plate did break(As long as you don't mess with it you will be fine)
The trigger sometimes gets stuck on semi but fixes it self when shooting at full auto
As a result this is a great lower for its price although it has some down sides to it. Definitely recommend if you are willing to spend the extra money to upgrade the Internals.
"I picked up a pair of these for parts. Just tore one down. My thoughts:
Internals are plain old basic parts (nothing "upgraded" really). Basic plastic spring guide, basic air nozzle no o ring. Basic plastic piston 1 steel tooth. Basic plastic piston head no bearings. Basic plastic/brass cylinder head. Gears are basic oem gears, not the better shs oem gears that some KA rifles come with. Does come with a tappet cam piece on sector gear. 7mm bearings, not 8mm as the product info states. Basic wiring.
The body is your typical KA body. Nothing really wrong with it. The gearbox shell is a bit different than other KA shells I've had pass through my hands. No extra material inside that needs to be carved away for 12:1-13:1 gear clearance. Bottom of shell has window for AR latch tripping. Trigger sits in the shell very nicely. No flopping/falling out. Pistol grip has brass inserts for screws on motor plate. Pretty high tpa motor for dropping the arm in a neo can for a very good torque motor (frankentorque)
Priced reasonably for a good lower receiver, nice shell, and motor armature. The internals are no better than your generic basic acm m4
"I got this a few months ago to complete my dmr build. Very sturdy and seams like it will last.
Only problem is, when I first got it, it had trigger issues. It would shoot but when you pulled it to hard it will pop and stop shooting. After a wile this seams to have gone away. This fits perfectly with the King Arms upper receiver also with navy seal trade marks. It works great with a 535mm angel custom 6.01, and a prowin hop up.
good motor with nice rof
high fps (Can be a con if you play indoors)
AWESOME SEAL trade marks.
some mags don't fit (easy fix}
Fire selector switch is a little loose (can be a pro)
Dust cover doesn't stay closed, and it broke after a few months. (it broke on the clip that keeps it in place)
Pistol grip is sharp in a place, but can easily be sanded down
Over all I give it a 4.4 and would recommend it to anyone.
Discuss about King Arms Limited Edition Skull Frog Lower Receiver with 8mm Gearbox Front Wired (363mm) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!