"I've owned many airsoft rifles. This one is elite!
Reliable and accurate for out of box
Sounds and feels great
Everything you want
Rail screws loosen with a fore grip. Had to locktite them. No big deal
Sometimes the fire selector switch gets stuck between safe and semi "My honest review....
I was looking for an HPA gun that was not going to break the bank. I literally just started playing Airsoft (I'm 34) and was looking for something that would last me awhile, or at least until I got bored of it. I was doing some research and found the Tippmann M4. I did a lot of research on this rifle before I bought it. I knew all the tricks and problems with it before I made the purchase. I can honestly say I am not disappointed with my decision. Tippmann has great customer service. If you something breaks just send them an email, and they will replace it.
PROS: This thing runs hot right out of the box. Which is good because it can be dialed down. If you are running a DMR setup its perfect. Also, if you are running a 400 FPS limit, then all it takes is a little tuning with the allen key provided to turn it down.
This thing does not need a battery. That was one of the reasons I really wanted it.
Milspec weapon, which means all milspec or real steal compatible parts will work on this weapon.
Metal body and completely pneumatic.
HPA, if you run this, buy the tank and line. Does not need a regulator, (can also be a con).
Blowback is really nice.
CONS: The HOP UP, the hop up on this rifle is absolutely GARBAGE. Luckily some research will help, just get a drop in hop up mod or (TDC Hop up) you will not be disappointed.
CO2, although its nice to have the option, its really not practical. The mags only hold 80rds and you do not use all the CO2, so when you go to change mags, the mag does not want to come out. They are making a 120rd mag. Have not tested it though.
No regulator, mean you use a lot of air fast. I use a 3000psi tank and I can usually last the whole day. But if you run full auto all the time then you will use a lot more air. I usually run Semi only.
Remember people this is not a polar star. If you are looking for something like a polar star then this is not for you. Also if you are not mechanically inclined or know someone who is then this is not for you. If you run this only CQB then you should be fine. If you are trying to get some distance right of the box then nah bro. Remember do some research. "This thing is da bomb!
Fun to shoot
Can run off a $30 C02 tank. No expensive regulator needed!
Both GBB and HPA
Great flip up iron sights
Polymer rail (I didn't like it but that's my opinion)
Hop up isn't super consistent ($10 after market part can fix that)
Get it. It's a great platform. The only mandatory thing you'll need to get is a replacement for the "nub" that comes stock. It isn't consistent. But seriously, 11/10 would buy again. Read More Reviews Write a Review
« Back to product description
Optic shown in image not included Tippmann M4 Carbine Airsoft Gas Blowback CO2 / HPA Rifle
The Tippmann M4 Airsoft Carbine revolutionizes the current gas/HPA powered airsoft system. The Tippmann M4 Carbine can be operated by either standard 12g CO2 canisters that are located in the magazine or can be plugged into a remote air rig for a reliable HPA-powered airsoft gun. The internals feature Tippmann's own pressure valve system which removes the use of complicated electronics. The rate of fire (ROF) is adjustable from as low as 8 rounds per second to as high as 20 rounds per second using the easily adjustable valve delay. The velocity is also adjustable from 270 FPS to 400 FPS (w/ .20g BBs and standard 362mm inner barrel). The inner barrel and hop-up unit are compatible with standard aftermarket AEG parts and standard AEG M4 magazines can be used when using HPA via remote air rig. Externally, the Tippmann M4 Carbine is constructed out of high quality and durable aircraft-grade aluminum with a nylon-fiber polymer stock, rails, and AR pistol grip. The full-length picatinny rail system features 8 different mounting positions and is mil-spec, allowing all RIS-compatible attachments to easily mount onto the rail. The outer barrel and gas block are also manufactured to the same standards. The upper receiver breakdown works just like its real-steel counterpart; simply push the rear pin out and fold the upper receiver forward. Tippmann has raised the standard in the airsoft world by providing the most reliable and adaptable gas system encased in an immaculate M4 platform. Made in the USA.
Features: Multiple Gas Input – CO2 Cartridges or Remote Line Adapter Gas Blow Back - Realistic Recoil/Kick Full Metal (Aluminum) Receiver, Barrel Assembly, and Buffer Tube Adjustable rate of fire – 8-15- RPS Adjustable velocity – 300-400 fps (0.20 g BB) Adjustable Hop-up Bucking Adjustable Front and Rear Flip Up Sights Adjustable PTS MBUS sights Anti-Jam Technology Realistic Disassembly Modular Foregrip – 8 sided picatinny capable Glass Filled Nylon grip Accepts many real AR stocks and handguards Works with many AEG mags when remote line system is used Remote line adapter included Accepts industry standard AEG inner barrel Made in the USA Length:
~363mm Length - 6.03mm Bore
90rd Proprietary CO2 Mag. With HPA setup, works with Matrix, G&G, Tokyo Marui and other compatible M4 / M16 Series Airsoft AEG Magazines
270 FPS to 400 FPS (Adjustable, measured with 0.20g BBs)
12g CO2 cartridges (unregulated) or regulated HPA remote line system
Gun, Magazine, Manual
Wanna chat about
Tippmann M4 Carbine Airsoft Gas Blowback CO2 / HPA Rifle?
Have questions about this item? We monitor these comments daily, but it may be faster to
email us directly or call us at 1-626-286-0360.
Facebook about THIS with your friends! Comment for a chance to win awesome airsoft prizes. Details can be found on The Evike Facebook Fan Page HERE! Remember to leave "Also post on Facebook" checked to qualify your comment!