ID: 51174 (MAG-GB-06-06)
Hover or touch above to zoom
Lonex Polymer "Flash Mag" 360rd Hi-Cap Magazine for M4 / M16 Series Airsoft AEG - Black
Say goodbye to the constant winding of your Hi-Cap magazine! The Flash Mag is ready to go with a single pull of the winding cord. With high quality polymer construction and an authentic realistic look, the new Flash Mag is the way to go! New design gives the magazine a tactical modern look as well as the ability to clamp multiple magazines together without the need for additional parts.
- Durable polymer material
- Ribbed exterior for better grip
- Easy operation, one pull and you're ready to go!
For Tokyo Marui, G&P, Matrix, DBoy, VFC, CYMA, Classic Army, ICS, JG, Echo1, and many other compatible M4 / M16 series Airsoft AEG riflesCapacity:
LonexWhy Hi-Cap Magazines?
A High Capacity Magazine (AKA "Hi-Cap") holds a larger amount of rounds than standard allowing the operator to play for longer between mag changes. This can be a huge tactical advantage and also means you usually never have to worry about running out of ammo in-game. Hi-Caps will make a slight rattle due to the large amount of rounds being held in the BB reservoir, but this slight noise is indistinguishable in the heat of battle. Simply outfit yourself with a few Hi-Caps and you are ready to rock!
(Write a review)
"Well I have bought a ton of aftermarket parts for my gun and friends guns that are not tech savvy and decided to start to write some reviews on them. I am somewhat of a gun tech not a pro just mod to make things work properly, I do It for fun. This mag is great but some tiny cons IMO.
Main used Setup for this mag:
- g&p metal body widow maker upper lower
- 6.03 363mm matrix barrel (will be changing this out for 6.01 angel custom due to flaw in matrix barrel, inner bore diameter is not correct and tightens at the end of the barrel - will write a review for this as well)
- valken v12 dropin
- 75 degree maple leaf(will change for 70 degree shortly)
- G&P outer barrel
- 10" APS keymod rail
- 50+ rps
- 350-360 FPS .25g
-Feeds great and fast as mentioned above no issues keeping up with the rps but its all about modding your hopup placement really in my opinion along with checking nozzle and bucking location/protrusion in the hopup.
-Mag is very light weight and gives a snug fit into the mag housing on G&P receiver. just a tiny bit of forward and back movement which does not effect feeding.
I tend to wind my mags constantly and ended up breaking the internal spring(FYI this took a while 5k+ shots through it and have had this mag for a while). if you ever opened up a mag you know what I am talking about. Spring seems to be made of some rather eh quality metal but was an easy fix by just bending the spring metal after the break to be placed back onto the winding mechanism and walla fixed and in working order again. bottom forward push protector on the mag is a pain sometimes when your in the heat of the moment you can pull it right off and then have to put it back on, not really a big deal unless you are about to get ambushed and are futzing around with it. Recommend keeping it open in fast pace CQB matches.
So far fits my ICS build, A&K masada dmr and of course the M4 G&P. Overall I gave it a 4 since the metal spring material was rather cheap compared to other mags(stocks mags as well) I have opened and for lonex I expected better quality.
If you are looking for a fast feeding light mag i would recommend this product. Just don't over do it on the winding like I do and longevity of the spring in the mag should be fine.
Also on a side note if you are a tech or tech savvy I would recommend opening up the mag and cleaning it. Was a bit dusty inside. Pretty sure that would void any warranty though(if any) If you do it just know you may have voided your warranty.
In short 4 stars - good quality outer shell, lightweight, internal spring is iffy on quality, dusty inside, fast feeding, bottom mag sleeve pulls off completely just pull it lightly, fits ICS, A&K masada and G&P magwells
"Was patiently waiting for these to come back in stock and when they did, I had ordered two of them for my Krytac PDW. They look great, feel great, and I love that the door at the bottom slides out. The sliding door was specifically why I had wanted these mags. These mags will physically fit into a Krytac fine. However, they will not feed properly. When I was able to, it would fire up to maybe a dozen rounds on either semi or auto and then nothing. There is a little wiggle to them while in the mag well, but no more than the Elite Force midcaps that I already own that feed well. Same result w/ the second mag I had purchased.
Extremely dissapointed, I literally cannot stress enough how disapointed I am.
"Great magazine, looks awesome and is super light. It's a little finicky to get the BBs "caught" in the winding mechanism, but this is my first flash mag and I'm pretty new to airsoft, so it's probably me. It's so nice not having to wind anything up, definitely getting more of these when I make my next order!
Discuss about Lonex Polymer Flash Mag 360rd Hi-Cap Magazine for M4 / M16 Series Airsoft AEG - Black with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!