Optics shown in images not included.
BO-Dynamics / Lonex Full Metal 21" M4 / M16 BAW-R SPR / DMR Airsoft EBB AEG Rifle - Black
Based in France, BO Manufacture is a custom shop which specializes in making high end custom airsoft replicas and collectibles. Each gun is individually hand built, tuned, and then thoroughly QC checked to make sure each gun meets the highest of standards.
The BAW-R line of AEG's feature a patented recoil shock system to deliver a much more believable amount of recoil over standard EBB rifles. Housed in the buffer tube of the rifle, the recoil shock system is able to deliver almost the same amount of felt recoil as some gas rifles while still retaining the convenient nature of an AEG.
At the heart of this AEG is a complete set of high performance Lonex internals, expertly assembled and tuned by technicians at BO-Dynamics. The gun is built to perform as it comes standard with the Lonex Proline upgrade parts as well as super high torque 32:1 gears coupled with a custom high torque + high speed motor.
- Full metal aluminum upper and lower receiver
- 12" precision CNC machined aluminum free float rail system
- High quality trademarks stamped into the receiver
- High quality anodized matte black finish
- Functional bolt stop and bolt release for easy access to hopup controls
- Blow-Back Adaptive Weapon (BAW) system adds enhanced recoil for a more realistic feeling rifle (20% more recoil)
- Removable, adjustable front and rear flip-up iron sights
- Full length top rail for Picatinny mounted optics and accessories
- Steel single point sling mount
- Adjustable Crane stock with no slip rubber pad
- High speed & high torque motor
- Enhanced custom gearbox w/ Lonex double bushings
- Steel ball bearing spring guide, trigger, bearings, and cylinder
- Heat resistant silver wire
- 6.03mm steel tight bore barrel
950mm / 1020mm (Adjustable)Weight:
~509mm (6.03mm Diameter)Magazine Capacity:
120rd Mid-Capacity. Works with Matrix, G&G, Tokyo Marui and other compatible M4 / M16 Series Airsoft AEG MagazinesMuzzle Velocity:
430~460 FPS (Measured with 0.20g BBs)Thread Direction:
Custom (Proprietary gearbox shell & spring guide; other internals are Ver.2 compatible) Motor:
9.6v Small Butterfly Type recommended (Battery not included. Wired to rear w/ small Tamiya connector)Hopup:
Yes, AdjustablePackage Includes:
Gun, Magazine, ManualManufacturer:
BO-Dynamics / Lonex
FPS Range: 430-460
California residents click here for Proposition 65 warning
(Write a review)
"You point this thing it a direction of what you want and it will shoot it with ease. That's saying something considering im in georgia and i have bushes and tress to shoot through. The blow back system looks cool and makes little noise. The gun firing has a low profile by it self. All in all this gun was worth every penny,
"I got this gun a couple months back and it is just awsome for the barrel to the stock. I upgraded it with a 6.01 madbull barrel and madbull blue bucking and can hit a chest sized target with .25gram bbs however it takes some wind compensation. Out of the box the gun was shooting at 440fps i have not chronoed it with the upgrades. The magazine that i would recomond would be the bamf mags there a little tight but work great. The paint is vary hard to chip and there is almost no wobble anywhere on thr gun accepts the mag it comes with seems to wobble a little but nothing that would hinder the riffles performance. I would not recomend running the gun with less then an 11.1 as the spring and recoild system take extra power to pull back. The battery compartment in the crane stock it slightly hindered bu the recoild sistem so fitting 2000mah lipos is difficult. It you plan on running a scope it will be most comfortable to have an extra sight riser if you run any kind of face mask as the rail is at the same height as the stock. The back sling point is vary sturdy there is no front sling point included. Also the motor can get warm at times nothing to worry about. Mosfets will glitch it full auto due to the recoil system (i use a burst wizard) riffle fits all the mags i have accept kwa's. The gun comes with two high quality RIS protectors that are sturdy and comfotable. The flash hider is simple to remove using a allen key and a locking wrench thing. The recoil on the gun feela cool but does not effect accuracy. The iron sights are actualy usable but yield a small view. The riffle is pretty easy to dissasemble it slides off instead of fliping up ( but watch the dust cover or it can get a dent. The hop up is plastic but works great. The slide when you realease it doesnt sound vary cool. Well thats all i can think of so if you actualy read all this im guessing you want the gun and its bad booty.
Accurate to hit a chest sized target out of the box at 150ft
Vary vary sturdy all metal construction
440fps out of the box
Lots of RIS
Sturdy sling point
High quality hand guard protectors
Simple to remove flash hider
Comes with a tight bore installed
Working bolt catch and realease and it doesnt freek out when you forget to release it even though it a EBB
Recoil looks and feels cool and doesnt take away from accuracy
Sounds totaly different then anything
Needs an 11.1 for good trigger respons and fire rate
Kinda heavy but you never notice in combat
Doesnt work with a burst wizard
A little loud
Slide bolt slam doesnt sound cool
Discuss about z BO-Dynamics / Lonex Full Metal 21 M4 / M16 BAW-R SPR / DMR Airsoft EBB AEG Rifle - Black with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!