- Heavyweight, realistic feel; made from aluminum alloy
- Enlarged baseplate allows for easier reloading and manipulation; licensed Salient Arms design
- Enhanced gas router seal and high-flow output valve provide improved FPS output
- Reinforced valves and seals improve gas retention
- Powered by standard 12g CO2 cartridges / powerlets
- CNC Machined steel retention cap holds 12g CO2 cartridge nice and tight, without stripping
- Realistic 17rd capacity (internal limiter can be removed)
The EMG BLU series magazines are improved option over standard OEM magazines. Their heavy weight provides an extremely realistic feel, made with aluminum alloy for durability. Key features are the enhanced magazine baseplate, a Salient Arms International licensed design, to greatly improve handling and reloading of magazines.
The Basic Models replicate the realistic round capacity for their corresponding model. This was done in an effort to further promote practical firearms training with Airsoft GBB pistols.Compatibility:
EMG SAI BLU, TM, KJW, WE, GLOCK (Umarex and Cybergun/Spartan) gas blowback Airsoft pistolsCapacity:
17 roundsGas Type:
12g CO2 cartridgeManufacturer:
California residents click here for Proposition 65 warning
The EMG vision is to manufacture products the world have never seen before, products we would put our names on it, and products that hits the spot! "EMG" (Evike Manufacturing Group) is spawned from the realization that if you want something done exactly the way you want it, you need to do it yourself and we did just that.
We took our 16 years of knowledge as the market's lead retailer, our network of 300+ superior manufactures, we work with top innovators in the firearm industry who inspires, combined with the vision to invest into the Airsoft industry we believe in, EMG was born.
(Write a review)
"It seems I was wrong
My first review of this mag, I talked about a way to engage the thread and avoid stripping the inner thread.That worked with the first mag, but as I was removing the cap from the second one it was crunchy ,but I had no choice but to keep backing it out. Once I did it would only cross thread on while tightening and well that stripped it.No good now except for parts.
The 2nd mag unscrewed and the co2 went in and it screwed back in without any problems.
So I inserted into my WE G-34 which is just a larger G-17 ,and on the first shot the exhaust valve stuck, freezing my nozzle before I could eject the mag, thus destroying my nozzle (which broke in half) spent the next 1/2/ hour replacing the nozzle with a spare for my G-18C..
so I will not be using these in my G series pistols until I can upgrade the piston head and nozzle to a set that can handle CO2 .
That being said if your we g series pistol is stock green gas or propane. than use at your own risk.
I bought 2 of these mags and it took 2 of them to make one that worked. Not Evikes fault, but WE should put a warning on the box that if it is a gas pistol then co2 might damage the gun
Luckily it only damaged my nozzle and I had 2 spare nozzles
P.S These are good mags for a co2 pistol. That's why I only gave them 4 stars
I have found that if you set the threaded end cap within the threaded hole ( after inserting the 12 gr. co2cartrige hold the mag with the feed spring
facing you put the hex cap into the hole, put your forefinger and your middle finger over the cap with the hex hole showing and gently rock the end cap side to side you will feel it grab thread on the lower side. keeping your fingers in place insert the long end of the hex wrench into the hole in the cap and very gently start to screw the cap in you will either feel it grab the thread evenly or not .
I f it does not, do not force it but rock the end cap again until it grabs the thread. It really does not take as long as it sounds but it works.
"Good mags so far, only a couple of drawbacks; one is the allen key needed to tighten CO2 cap is NOT included (which is why I knocked off a star) and its a smaller size than used by KWC...
I'm getting up to 85 shots per mag, which is real nice- in my stock WE G18c.
The other drawback is I had to trim some flash off the inside of the feed lips (yes, they had to be removed to do this). Its easy but shouldn't be required on a new item.
I trimmed the follower shuttle (plastic bar that rides inside follower spring) down to increase capacity to 17bb (to match capacity shown on back of mag) and it can be removed completely to allow a max of 25bb.
YT vid: WE-G-Series EMG SAI CO2 Mag Fix+Mod
Discuss about EMG Magazine for BLU & GLOCK Series Gas Airsoft Pistols (Model: Basic / CO2 / 17rds) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!