ID: 49421 (AEG-ARES-CCC-DE)
Hover or touch above to zoom
Optic shown in image not included.
MAP ProtectedExempt From Coupons
No Payments + No Interest if paid in full in 6 months through PayPal Credit. Simply check out using PayPal and select PayPal Credit!
Optic shown in image not included.
- Built from extremely tough reinforced polymer material
- Compact design is perfect for CQB or as a sidearm
- Built-in scope riser with integrated battery tube
- Ergonomic vertical grip
- Textured pistol grip
- Tactical Folding stock
- Low-profile fixed sights
- Enlarged magazine release button for easy use
- Full metal gearbox with reinforced internal parts
- ARES unique built-in Electronic Firing Control System (EFCS)
- Gearbox programmable via EFCS programming unit (sold separately)
330mm / 565mm (Folded / Total)Weight:
300rd Hi-Capacity. Works with Matrix, G&P, Tokyo Marui and other compatible M4 / M16 Series Airsoft AEG MagazinesMuzzle Velocity:
280~310 FPS (Measured with 0.20g BBs)Thread Direction:
Ver 2 Full Metal, Fully UpgradeableMotor:
Long TypeFire Modes:
Semi/Full-Auto, Safety (Other firing mode configurations available via optional "EFCS" programming unit)Battery:
9.6v Small Stick Type recommended (Battery not included)Hopup:
Yes, AdjustablePackage Includes:
Gun, Magazine, ManualManufacturer:
FPS Range: 280-310
California residents click here for Proposition 65 warning
(Write a review)
"The reason why I gave this gun one star is the 2 time I used it it broke. It was only the tappet plate but there are better guns you can get for 200 dallors
"I've had this gun for over a year and really enjoyed it.
The externals are of a good plastic/polymer. Ares tinkered with the original M4 receiver and flared out the magwell and strengthen other spots. The trigger guard is built in but it is enlarged for gloves. The motor grip has more material behind it and that gives a better grip for me. The edges of it are smoothed so your middle finger will not get scratched like a standard M4 grip would. The folding stock is strong and similar to a M4A1 stock in the 5th position. The mosfet does not complicate opening the gear box besides adding four extra small screws. The trigger pull is nice and there is a good click when you hit the button. Stock performance was more than acceptable. The drum hop unit allows for precision that won't move. The sling point is nice and thick.
Not good stuff:
My mag catch was cut weirdly and hung in to far, making mag changes difficult. That got replaced. The two tabs that keep the battery cap/ front sight on can brake if you force the cap on with out holding the buttons down. if you get a lipo be careful of the size. if its two wide it will not. I have a 7.4 that is 168x12x18mm that fits. After a long time the screw holding the pinon gear fell out. Luckily the mosfet stopped the gun from continuing to fire or there would have been damage. My outer barrel was assembled crookedly and I had to correct that. The plastic hinge of the stock wears and it becomes wiggly up and down, when locked after a time. The stock bucking worked but it was thin and the inner barrel hop up window was thin and cut into the mound of the bucking. Decent barrel quality besides that. cylinder head was not decent.
Misc. stuff: Mine came with a flash hider replacement that was CW. I got mine a year ago so I do not know if they still include one. You can pull the fake bolt back without pulling the charging handle. That could help with adjusting it I guess. I fixed the stock wobble by taping a piece of an index card to the inside. If you are going to disassemble the gun, unscrew the stock before trying to take apart the uppers. That affects them for some reason.
Mods: If you want more fps, install this cylinder http://www.evike.com/products/25872/. I got a 60 fps bump from it. Any other compression improvements are also recommended for fps increase before going for the spring.
"i won this in the boa like the other guy and this gun is amazing with a qc spring, built in mosfet works good with a 9.6 but I'm upgrading to a 7.4. the only con is the folding stock doesn't lock in place but it states there with no problems
Discuss about ARES Amoeba CCC M4 Airsoft AEG Machine Pistol (Color: Dark Earth) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!