The Angel Custom "FPS-UP" Mock Silencer is a barrel extension equipped with more than just an aggressive new look, but the quickest way to increase the FPS and range on your Airsoft weapon! The innovative internal spring design allows the integrated 6.01mm tight bore inner barrel to link up with your Airsoft pistol's inner barrel doubling your inner barrel length for a whopping 15~80 FPS increase! All of these performance is plug and play without depleting more gas or co2! Every Angel "FPS-UP" mock silencer comes complete with 14mm negative threading to screw onto your Airsoft weapon in seconds. Laser engraved "Semper Fi" registered trademark for the rulers of the battle field! This device is design for hand guns but may work for rifles depending on your inner barrel configuration.
The internal tight-bore barrel is spring-latched and is generally a plug-and-play fitting most of the Hi-Capa, 1911, Glock, USP, M&P, M9 and other gas pistols on the market. (tested and verified by our technician).The average FPS increase we have been finding is around 30~80 FPS.
Due to the various type and designs of "threaded outer barrels" on the market" (for example, threaded barrels with additional threaded adapters). If the inner barrels don't align (resulting bbs not leaving the barrel), please detach the butt-section of the unit, swing the internal lock and adjust the inner barrel position properly when necessary. Remember, the goal is to align the two inner barrels.Test Conducted on a WE, KJW, HFC, Elite Force, Socom Gear, AW Custom and a KWA ~300 FPS GBB resulted 370 FPS by just screwing up the Angel Custom "FPS-UP" mock silencer.
This silencer might work on other pistols and rifles but not guaranteed by Angel Custom, as the spring latch inner barrel only will work with guns with the stock inner barrel at optimized position.Features:
- Increase FPS output by 30~80 FPS.
- Enhances accuracy, grouping and range
- Flawless CNC precision processing and robust construction
- Made with military / aircraft grade aluminum.
- Built-in 115mm Angel Custom stainless steel 6.01mm precision tightbore inner barrel
- The fastest and the most energy efficient way to increase FPS and range without sacrificing durability.
- Inner barrel is spring loaded for a precise fit over your current barrel
- Black Anodized Finish with professional laser markings.
110mmInner Barrel Length:
For Airsoft GBB Pistols w/ 14mm- ThreadsMaterial:
California residents click here for Proposition 65 warning
(Write a review)
"Tried it on two guns and actually lost about 20 fps, would only recommend this for somebody whose gun is shooting just a little too hot. Otherwise seems to be great quality!
"I bought this for my WE 1911 and immediately noticed that the spring in the suppressor was pushing back my inner barrel and not allowing my slide to move, it was also making my outer barrel rub on the inside of the slide and taking the paint off
I think I either need a weaker spring inside the suppressor or a stronger recoil spring to push the inner barrel back to where it should be to allow the slide to cycle properly
"Now when I purchased the this item I was pretty excited for how it might perform, BUT so far it hasn't even worked for me. Now given I've only tried it on two gas blow back pistols but it just seems to have issues. Firstly, the thread size is pretty short so I often find myself left with a TON of thread space after I screw it on tight. Now when I tried it on my Echo 1 Timber wolf the BB's will shoot properly and cycle properly but I found that the BB's acted as if they had absolutely no Hop-up and would end up only traveling barely 20+ feet and I haven't had this problem with ordinary mock suppressors; I tried adjusting the hop up but it would end up with a similar result. On my ASG CZ P-09 with C02 the BB's would shoot straight but the gun would not cycle properly at all, now given most mock suppressors don't make the CZ P-09 cycle properly I found this even more apparent as every shot after the first one wouldn't cycle back. Lastly, there is no way to tell if this barrel of this locks in with your suppressor, and I've even attempted to adjust the barrel.
SO in conclusion:
Barrel Threading is way too short and you'll end up having a crap ton of thread space left.
The Suppressor itself is pretty heavy in comparison to other mock suppressors.
Wouldn't Even work on my Gas pistols so I don't even know if it actually increases FPS.
There's no way to tell if the barrel of the suppressor is lined up with your inner barrel.
Discuss about Angel Custom FPS-UP Mock Silencer (115mm with 6.01mm Inner Barrel) (Version: Death From Above / 14mm Negative) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!