*Red Dot Scope not includedH&K Umarex MP7 Rapid Deployment Hard Kick Airsoft Gas Blowback by KWA (Desert Tan)
For H&K fans, this is an authentic / licensed "H&K Airsoft MP7" that is directly manufactured by H&K licensee Umarex USA (OEM by KWA)! The H&K MP7 is a compact, lightweight Personal Defense Weapon that is smaller than a conventional sub-machine gun. The conventional layout and fully ambidextrous controls on the MP7 means it handles like a pistol yet allows targets to be engaged like a rifle. This clever design allows any user to operate this PDW with minimal training. The MP7 is ideal for those on Personal Security Detail (PSD) or plain clothes duty in hostile territory and require more firepower than a pistol can provide.
The H&K MP7 GBB features authentic H&K engraving, compact frame, realistic hard-kick blowback, extreme high quality, detailed finish, superb accuracy, superb range, fully & semi automatic firing, two position retractable stock, rubber buttpad, full ambidextrous design, adjustable iron sights, accessory side rails, integrated scope rail, flip-down vertical support grip, on frame safety, 40 round magazine capacity, 380~430 FPS power output, adjustable hopup, and is powerd by Airsoft green gas or propane adapters.
- Fully trademarked H&K / Heckler & Koch Engraving.
- Compact design; great as a sidearm or primary weapon
- Realistic, hard-kick blowback
- Extreme high quality build and detailed finish.
- Superb accuracy and range.
- Adjustable hopup for optimized range.
- Fully automatic and semi-automatic firing.
- Light weight and high strength polymer frame.
- Telescopic two position retractable stock with rubber buttpad
- Metal rails, flashhider, magazine, fire selector, slide release, iron sight and retractable stock.
- Adjustable front and rear flip-up iron sights
- Textured pistol grip
- Heavyweight full metal magazine
- 20mm front accessory side rails
- Full length top rail for optics.
- Integrated flip-down vertical grip
- Completely ambidextrous: Ambidextrous firing selector switch, bolt release, mag release and charging handle
- Orange Flashhider affixed to outer barrel to comply with USA regulation.
6mmAmmo Type :
6mm Airsoft BB. 0.20g or heavier / Matrix & compatible high grade Airsoft bbs recommended.Power:
Green Gas, Propane AdapterOptic Compatible:
Picatinny / Weaver rail.Safety Type:
Manual, AmbidextrousOverall Length:
380mm / 590mm (Retracted / Extended)Weight (unloaded):
40 RoundsMuzzle Velocity:
380~430 FPS (Measured with 0.20g BBs and Green Gas)Fire Modes:
Semi / Full-Auto / SafePackage Includes:
Gun, Magazine, ManualHopup:
Yes, AdjustableRear Sight Type :
Flip-up - Dual Aperture - Adj. for Windage & ElevationFront Sight Type :
Flip-up - Adjustable PostManufacture:
Heckler & Koch (Licensed) / Umarex USA / Elite Force / OEM: KWA Heckler & Koch
The U.S. affiliate of firearms maker Heckler & Koch GmbH of Oberndorf, Germany, Heckler & Koch USA is the American distributor of a wide range of technologically advanced small arms for defense, law enforcement, and sporting use. H&K has officially granted a license to Umarex for the H&K MP7. Umarex USA has officially licensed the Heckler & Koch MP7 Personal Defense Weapon.
Spare Magazines Available here at Evike.com!
Find MP7 tactical holster here at Evike.com!
Find MP7 Mock Suppressors here at Evike.com!
(Write a review)
"Purchase at your own risk, especially if you plan on changing the bolt to the CQB bolt. I will say, that when it was in one piece, it was quite the gun. It was loud and had a pretty good kick. And despite being a short gun was still pretty accurate at a distance. And, if you needed to lower the fps, you could get a CQB bolt. But doing so will void your warranty if not done by a certified KWA tech, even though the swap is one of the easiest airsoft mods I've seen.
And, I don't know if the bolt is what cause my gun to self destruct, but I've heard people having the same experience after installing the bolt. The body cracked, as did the rear reciever cover, which was so badly damaged it's missing pieces of metal. And sadly, the part is out of stock, as it has been for the last 5 months. However, when I looked closely at the metal rear reciever cover, I noticed obviously imperfections, and cracks that were painted over. That says to me that the metal casting quality is an issue, or at least it was on my gun. And the trouble didn't end there. In a completely unrelated spot of damage, one of the clios that holds the front reciever cover. There would be no reason for something like that to happen other than defective plastic. And it could just be that my gun is defective. But I have seen the issue of the body cracking happen to many people. So if you're thinking about getting one, cross you fingers that QC at the factory was doing its job the day your gun was made.
-Accurate for a short gun
-Easy to lower fps for CQB play
-If you get a leaky magazine, getting it replaced isn't a problem
-magazines can be expensive, and sometimes you get a lemon
-flip up sights came loose after a few weeks of play
-getting replacement parts can be a problem (owned my mp7 for 7 months, 5 of which it has been broken, waiting for parts)
-possible problems with the quality of plastic and/or metal
-not 1:1 scale
"I love this gun. It shots very good and the kick is very nice. The olnly think is one of my two mags started to leak but I think it was just a lemon because the other one works just fine. 10 it of 10 for sure
Discuss about H&K Umarex MP7 Rapid Deployment Hard Kick Airsoft Gas Blowback by KWA (Desert Tan) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!