Angel Ultimate DYNA Piston Head for WE TM Hi-CAPA M9 P226 1911 Glock Airsoft GBB Pistol

$12.00 $10.20

Model: AC-HC51-06
x

7 Customer Reviews

by Christopher S. on 01/27/2015
"I recently purchased this product along with a KJW KP05 and I was very disappointed. Out of the package the piece seems to be of very high quality as opposed to the stock plastic piston head in the gun. I happy disassembled my gun and put the piece in. It seemed to fit fine but I started to have problems immediately. the first was that the recoil spring assembly would not go back into place because the barrel was to far forward. This was not by my error, I have re assembled both air soft 1911s and real steel 1911s so I am well versed in the process, this being said I had to take out the blowback assembly , install the barrel and spring guide, the re-install the blow back assembly. The second issue that I found was that when I put the slide back on the frame, the gun would not fully go into battery, the slide still needed to travel about half of an centimeter forward. After trouble shooting this issue for a while, I found that the piston head was to long for the gun. this was a disappointment because the piece seemed so high quality, and would help the gun out so much, but rendered it uses less.
by Ruben C. on 10/30/2014
"This piece is not for any WE-Tech M9. I bought it for the Biohazard M9, but then realized it does not fit (because I did not read the description). It did, however, fit on my friend's WE-Tech Desert Warrior 4.3 1911.

Pros:
Makes it shoot harder
More efficient in gas use

Cons:
Unless you know your gun in and out, don't try installing this.

All in all, it is a great piece to make a better seal on WE-Tech guns. Make sure to put some silicon oil after it is installed on the o-ring!
by Sean M. on 10/15/2014
"This Piston head fit well in my We Hi Capa 3.8, but did not fit so well with my WE 18C Glock, so I ended up using the original instead. Power was increased with the Hi Capa. How much? I'm not quite sure
Angel Ultimate DYNA Piston Head for WE TM Hi-CAPA M9 P226 1911 Glock Airsoft GBB Pistol
The Angel Ultimate DYNA piston head was developed for the Tokyo Marui & WE system because an imperfection of the stock were located. Most after-market products will have the same specification as the stock resulting slight wobbling and air leakage during blowback operation. Marui's original piston cup construction and WE-Tech's 1911 series can all have the air leakage issue resolved with this upgrade. This piston head is 100% CNC with the re-sized dimension, with anodized and Teflon coated surface treatment resulting smooth operation, superb air seal and maximum performance.

Features:
  • Re-sized with accurate dimensions to minimize air-loss.
  • CNC Aluminum and teflon coated for smooth operation.
  • The highest level precision DYNA piston head in the market.
  • Fix inherited air leakage issue in stock Tokyo Marui & WE Hi-capa / 1911 / Glock series.
  • Made from High Quality CNC Machined Aluminum
  • Exploding O-Ring Design for Optimum Airflow
  • Hard Anodized Coating

  • Compatibility: For WE-Tech, Tokyo Marui, KJW and other compatible 1911, Hi-CAPA, Glock, G17 WE17 G18C WE18C and P226 Series Airsoft GBB Pistols
    For Marui Hi-capa 5.1 4.3 M1911 A1 P226 G26 G26 Advance / S70 / G17 / M9A1
    For WE Hi-capa 5.1 / 4.3 / M1911A1 P226 G17 G18C
    Will not fit Marui old system G18C & M9.
    Material: Aircraft Grade Aluminum
    Treatment: Anodized & Teflon coated.
    Manufacturer: Angel Custom

    Wanna chat about Angel Ultimate DYNA Piston Head for WE TM Hi-CAPA M9 P226 1911 Glock Airsoft GBB Pistol?

    Have questions about this item? We monitor these comments daily, but it may be faster to email us directly or call us at 1-626-286-0360.

    Facebook about THIS with your friends! Comment for a chance to win awesome airsoft prizes. Details can be found on The Evike Facebook Fan Page HERE! Remember to leave "Also post on Facebook" checked to qualify your comment!

    Items on Sale