Matrix Advanced Silica Airsoft AEG Hopup Buckings (Set of 2) - 70 Degree / 380~490 FPS

$10.00 $8.00

Model: HU-MTX-B70
Location: U5-117
x

4 Customer Reviews

by Max S. on 09/19/2013
"I thought these were bad so i got some other buckings (madbull, angelcustom,g&g) and this bucking is better then all of them great range and o.k accuracy but rip's easly other then that matrix buckings are aweseome
by Heidi A. on 09/10/2013
"With buckings like this, you kinda have to expect to get what you paid for. I've had numerous issues with these buckings, almost to the point of where my 2 year old worn down bucking might have worked better, but I kept using these for reasons I'll get into later. That being said you really should just find a better bucking, instead of putting up with the problems these cause.

Pros- Great air seal around the barrel, although you might have to mess with it a bit to get it just right
-Air seal to air nozzle is great when it works

Cons-Air seal to air nozzle is inconsistent at complete random
-VERY picky with what BBs you use-anything less than 5.95mm in diameter will double feed
-Soaks up silicon spray like a sponge, causing double feeds until it becomes dry again
-Fragile, tore one of the teeth off one just by removing it from the barrel
-Overall just inconsistent shot spread

The only reason I used these over my 2 year worn bucking was because it got to the point where it double fed no matter how good the BBs were, I would never use these otherwise. If I could I'd give it a 1.5 out of 5, but it gets a 2 because it may work better for you, this is just based off of personal experience.
by Chris M. on 08/09/2013
"Meh... I got a flyer, then all the bbs did was drop. Looked at the bucking and one of the two teeth on the inside were ripped off so i only had one... I wouldn't recommend these to anyone. Just installed my second bucking (came with two) I'm not using the spacers it came with, maybe that is why it ripped not sure, but its very fragile.

Pros:

Cons:
Fragile
Rip easy
Hard to pull out of the chamber
My bbs ripped one tooth off :(

I cant say any good things really... :/
Matrix Advanced Silica Airsoft AEG Hopup Buckings (Set of 2) - 70 Degree / 380~490 FPS
The Matrix Advanced bucking series are among the industry's most recent release packed with all the new designs for an advanced performance! Instead of a economical one-for-all bucking, the Matrix Advanced bucking series are made specifically in various hardness and degrees to best match your AEG's power output. Being one of the most recent release in the market, every Matrix Advanced bucking is engineered with integrated Silica Gel and inner teeth to further guide your shots to achieve power, range and accuracy with the precisely calculated contact surface it provides.

Hopup Bucking 101: Hopup bucking is a rubber tube right between your inner barrel and the hopup system. It is dedicated to control the feeding and back-spinning of your Airsoft bb as it leaves the inner barrel. The higher the velocity, the harder the rubber needs to be. Newer designed hopup bucking like the Matrix Advanced series also provides inner teeth to further guide the bb for a much longer range and accuracy.

Compatibility: For Tokyo Marui, Classic Army, G&G, KWA, JG, Echo1, VFC, Matrix, G&P and other compatible Airsoft AEG Rifle Hopup Units. Also works for GBB rifles and bolt action sniper rifles that uses or is converted to use AEG type buckings.

Bucking Hardness vs FPS Optimization chart
  • 50 Degree: 250~350 FPS / 0.20g bb
  • 65 Degree: 250~420 FPS / 0.20~0.25g bb
  • 70 Degree: 380~490 FPS / 0.23~0.30g bb
  • 80 Degree: 480~630 FPS / 0.25~0.40g bb
    *This chart is intended for reference only. Every rifle is unique and result may vary. Please use Matrix, Evike.com and compatible high grade bbs for best results.

    Hardness: 70 / 70 Degree
    Suggested Power Output: M100~M150 / 380~490 FPS
    Material: Hardened reinforced silica gel.
    Manufacturer: Matrix

    Installation Instructions: During installation, it is a good idea to apply some light silicon oil on the bucking. Keeping the bucking lubricated will prolong the longevity of the bucking and o-rings involved in any Airsoft equipments.

    Applications / Features:
  • Increase hop up accuracy and consistency.
  • Machine precision construction to ensure superb air seal.
  • Tight bore barrel friendly.
  • Easy installation.
  • Prevents double feeding.
  • Increase FPS (certain conditions may require.)
  • Advanced Inner teeth desugb provides a larger contact surface for enhanced range.
  • Enhances maximum range performance.
  • Made out of Silica Gel for advanced performance over traditional rubber.
  • Comes in set of 2 for the best value!
  • This product was added to our catalog on Friday 14 December, 2012.

    Wanna chat about Matrix Advanced Silica Airsoft AEG Hopup Buckings (Set of 2) - 70 Degree / 380~490 FPS?

    Have questions about this item? We monitor these comments daily, but it may be faster to email us directly or call us at 1-626-286-0360.

    Facebook about THIS with your friends! Comment for a chance to win awesome airsoft prizes. Details can be found on The Evike Facebook Fan Page HERE! Remember to leave "Also post on Facebook" checked to qualify your comment!

    Items on Sale