ID: 41033 (HU-MTX-B65)
Hover or touch above to zoom
Matrix Advanced Silica Airsoft AEG Hopup Buckings (Set of 2) - 65 Degree / 250~420 FPS50 Degree: 250~350 FPS / 0.20g bb
The Matrix Advanced bucking series are among the industry's most recent release packed with all the new designs for an advanced performance! Instead of a economical one-for-all bucking, the Matrix Advanced bucking series are made specifically in various hardness and degrees to best match your AEG's power output. Being one of the most recent release in the market, every Matrix Advanced bucking is engineered with integrated Silica Gel and inner teeth to further guide your shots to achieve power, range and accuracy with the precisely calculated contact surface it provides.
Hopup Bucking 101: Hopup bucking is a rubber tube right between your inner barrel and the hopup system. It is dedicated to control the feeding and back-spinning of your Airsoft bb as it leaves the inner barrel. The higher the velocity, the harder the rubber needs to be. Newer designed hopup bucking like the Matrix Advanced series also provides inner teeth to further guide the bb for a much longer range and accuracy.
Compatibility: For Tokyo Marui, Classic Army, G&G, KWA, JG, Echo1, VFC, Matrix, G&P and other compatible Airsoft AEG Rifle Hopup Units. Also works for GBB rifles and bolt action sniper rifles that uses or is converted to use AEG type buckings.
Bucking Hardness vs FPS Optimization chart
65 Degree: 250~420 FPS / 0.20~0.25g bb
70 Degree: 380~490 FPS / 0.23~0.30g bb
80 Degree: 480~630 FPS / 0.25~0.40g bb
*This chart is intended for reference only. Every rifle is unique and result may vary. Please use Matrix, Evike.com and compatible high grade bbs for best results.
Hardness: 65º / 65 Degree
Suggested Power Output: M90~M120 / 380~490 FPS
Material: Hardened reinforced silica gel.
Installation Instructions: During installation, it is a good idea to apply some light silicon oil on the bucking. Keeping the bucking lubricated will prolong the longevity of the bucking and o-rings involved in any Airsoft equipments.
Applications / Features:
Increase hop up accuracy and consistency. Machine precision construction to ensure superb air seal. Tight bore barrel friendly. Easy installation. Prevents double feeding. Increase FPS (certain conditions may require.) Advanced Inner teeth desugb provides a larger contact surface for enhanced range. Enhances maximum range performance. Made out of Silica Gel for advanced performance over traditional rubber. Comes in set of 2 for the best value!
"I would highly recommend this if you are operating in a cold environment since it is made of a silicon based material the bucking stays soft providing better spin on the bb. However, silicon based bucking don't last as long as rubber buckings. When installing the bucking in immediately took notice to the thickness and surprisingly strong shell of it. This bucking improved my range and accuracy almost 2 times during the winter and during the summer I hope it will do almost the same thing. If it's cold and you want the best performance switch to this bucking
"Order this because I want some decent buckings and this pair do the job. I have a two piece hopup, and makes a perfect seal to project the BB. Always use some lube to make them slip in easy when inserting them into the hopup. Compared to my "stock" bucking, I can actually dial it to the length I need to achieve.
"Good way to add shark and bucking in a hop-up but more risk of tearing. The higher the torque the higher the chance it will broke in the middle of a game. You also neet to re-adjute your hop up and won't be able to put it at min cause it will block the bb Inside the hop up.
Discuss about Matrix Advanced - Silica Airsoft AEG Hopup Buckings (Set of 2) - 65 Degree / 250~420 FPS with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!