Pre-Order - Estimated Arrival 05/2014: Custom 7.4V 1500mAh 20C / 40C PEQ Type Lipoly Battery

$28.00 $24.00

Model: BAT-PEQ01
Location: U2-138

2 Customer Reviews

by Yishai B. on 02/28/2014
"Please learn at least the basics of lipo batteries before posting a review. This Lipo is 7.4v which means it will cap a voltage of around 10 volts when fully charged. The danger of 11.1's is that they run at around 14volts when charged. Lipo batteries are not prone to explosions if you keep an eye on them and dont overcharge, overdrain, or overheat them to the point where they are burning to the touch. A 40C rating on these batteries means they can handle a large current being drawn from them without heating up too much or just not being able to handle it. That being said, NIMH 9.6v batteries are NOT more voltage or more reliable, but are simply made of different materials. Lipo's are good for getting large amounts of volts in smaller packages and lighter weights then NIMH. This is a good battery, buy a proper charger with it and keep an eye on it while playing and charging, and there should be no issues.
by Nate K. on 01/20/2014
"I got this along with some other stuff in order to power my new JG zombie killer pistol m4. I knew it was a lipo going in and if i had done some shopping around i would realized there are cheaper safer batteries. But more on that after some pro/cons

Light weight
Came charged

LiPo (people, they are known to catch fire. be careful and smart)
doesn't fit well in the included PEQ-15
Low voltage

So more on the alternative: I payed nearly 60 dollars for this battery, a charger and a safety bag. For just a little bit more (if i had checked properly BEFORE i purchased) I could have gotten a 9.6v NiMh battery. They are more stable and i trust them a bit more, plus more voltage. But it is your decision.
Custom 7.4V 1500mAh 20C / 40C PEQ Type Lipoly Battery
Perfect size for most PEQ-2 battery boxes. Even the very compact PEQ-15 and PEQ-16!

Dimensions: 72.5mm x 35mm x 14mm
Plug type: Small Tamiya
Charging plug type: BMS / XH 3-Pin Charging Connector
Specifications: 7.4 V / 1500 mAh
Output: 20C - Continuous / 40C - Burst
Charger: Not Included. Lithium Polymer / Li-Poly Chargers Only (4-Pin Charging Connector)
Application: To power Airsoft AEG guns. To increase rate of fire, pull high power springs, increase trigger response time, and to improve the over-all clean look of your AEG.

This product was added to our catalog on Monday 02 July, 2012.

This item is currently for Pre-order. Estimated arrival date is 05/2014. You can go ahead and pre-order yours now to ensure you will get it as soon as it arrives.

Wanna chat about Custom 7.4V 1500mAh 20C / 40C PEQ Type Lipoly Battery?

Have questions about this item? We monitor these comments daily, but it may be faster to email us directly or call us at 1-626-286-0360.