ID: 37391 (SL-MS-IAST01)
Hover or touch above to zoom
One-Point to Two-Point Conversion:
The IAS main function is its ability to convert from a one-point to two-point sling with extreme ease and speed. While in one-point mode the sling can be converted to two-point mode by simply attaching the front hook to the front sling point on a Weapon System. At this point the weapon system can be rotated onto the Operators back.
Due to the nature of a one-point sling, when in one-point mode the weapon can be fired from weapon side (strong side) or reaction side (weak side) without any problems.
For added value, with the yank of one easily accessible pull strap, slack is removed from the sling cinching it closer and more secure to the Operator. When the Weapon System is needed, release tension on the pull strap by lifting on the Tension Lock with your weapon side hand. The sling will then return to its originally set length, no further. Rotate the weapon back to the Operators front side unhook the front sling point to return to one-point mode.
A Quick Detach feature of the entire sling system was a very important function of the IAS since its first days on the drawing board. The Quick Detach buckle is always located between the two hook points. If the Operator, for any reason, must abandon his or her weapon they can do so with the click of a button. The entire sling system including the Weapon System will then break away from the Operator. This was incorporated for Worst Case scenario situations such as the Operator being pinned by his or her weapon (squad car flips over, weapon system is hung up, etc).
During the conversion process from one-point to two-point mode the weapon is secured to the Operator 100% of the time. If the Operator is surprised during the conversion process and releases control of the Weapon System it will not fall to the ground. No rifle in the dirt, no impacting optics on the concrete.
Ease of Use:
Everything about the function of the IAS is easy and can be mastered with minimal training and repetition. A MASH hook design was selected for the connection points. There are no springs or latches to fail or be overly complicated. When time is life, simple is best. By gripping the hook and squeezing the hooks jaws are opened and ready to be attached or unattached from a weapons sling-point.
The Irene Adaptive Sling (IAS) is ready to fit any individual. The product will ship in its smallest configuration ready to fit an average person wearing no body armor. If it needs to be sized smaller, the Operator can remove lengths of the nylon webbing (it is recommended that you re-sear the edges with a lighter to prevent fraying).
99% of individuals will be able to size the IAS by adjusting the friction locks. Keeping larger individuals in mind (with or without body armor) we have included extra webbing material on the IAS that can be let out. The IAS ships at a length ready to accept an M4 length weapon system. This can be adjusted for longer/shorter weapon systems. Adjustment instructions are included with your IAS.
Any situation where an Operator may need to secure his or her carbine or long weapon while still maintaining the ability for rapid deployment of said weapon.
Law Enforcement: An Officer may need to go hands on with a Suspect. By employing the function of the IAS, the weapon system is no longer between the Officer and the Suspect.
Military: During Urban Operations it may be beneficial to the Operator to secure their main weapon and draw a secondary when entering buildings or areas with narrow passages.
Action Movie Hero: Hacking computers.
Buffer Tube Sling Mount:
Included with the Irene Adaptive Sling is a Buffer Tube Sling Mount. The IAS works best when the Static Hook is connected to a sling point at the rear of the receiver. If you do not have a sling point at this position then use the included Buffer Tube Sling Mount.
Instructions for securing the Buffer Tube Sling Mount are included with the IAS.
We would like to emphasize that a rigid static point connected to the rear of the reciever is the best solution. The included fabric Buffer Tube Sling Mount will work, however a rigid point is ideal.
How it is Different:
The IAS is completely tethered to the Operator at all times. This includes the time during the conversion process from one-point to two-point mode.
The Quick Detach system on the Irene Adaptive Sling breaks the entire sling and weapon system away from the Operator, not just the weapon.
The entire sling system is created from Military grade buckles, one inch nylon webbing and steel MASH hooks. Webbing and buckles are Berry Compliant (see: Berry Amendment USC, Title 10, Section 2533a).
The IAS is 100% customizable for size and has redundant friction locks at all sizing points.
Manufacturer: Mission Spec
(Write a review)
"I own 2 of these slings. By far the best built most well thought out and versatile sling out there. You won't regret this purchase
Discuss about Mission Spec Irene Adaptive Sling - (Coyote Tan) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!