Phantom Advanced 1-4X Illuminated Reticle Rifle Scope

$180.00 $140.00

Model: Scope-Phantom
Location: L7-924

10 Customer Reviews

by Curran H. on 01/13/2014
"I have to say, I was truly excited to receive this scope. To my dismay it doesn't live up to what I expected. At first glance and touch the build quality is solid for a clone and could with stand a good beating. The 1x and 4x magnification is a nice asset although, small eye relief squanders its full effectiveness.

Beyond build quality and variable zoom option nothing else is impressive nor worth $140.00.

My main gripes are with the condition of the piece. As I've read in the comments and in other reviews, my sight came tilted to the side by a good margin. Now, this wouldn't be a huge deal, could it have been fixed by the right and left adjustment "knob" although this issue was more with the base and scope itself. The scope was off kilter with the base and couldn't simply be adjusted. This is obviously a huge deal considering you can't properly sight in the sight at all or at least for very long.

- Good build quality, not great but good
- Variable zoom great application
- QD mounts are nice

- Off set scope on base (couldn't sight in)

I wouldn't recommend the sight, the con I had, although only one major one, it was a MAJOR one rendering the scope useless. This scope is expensive too, save up for something else.
by Jacob G. on 01/09/2014
Great looking scope
Zeroing system is clearly visible meaning any defections is easily detectable(something that you can't do in normal scopes)
Great aesthetic piece

Eye relief. Now when I got this scope, I got it despite the eye relief gripes because my love for the specterdr knows no bounds but DAYUUUM Is this eye relief bad. Your eye needs to practically be right up on the scope for this to work. What does that mean? It means no extension on your collapsible stock, has to be fully collapsed. No, absolutely no backup iron sights. This shiznit has to be on the very rear of your gun.
Bottom line. If you love Specters, and you want one bad. I know it's tempting, but really do some soul searching before buying this one. Because your going to make sacrifices to make this scope work.

Switching between 1x-4x there's a bit of an issue. I haven't seen the zeroing issue exact just yet but I do know where it comes from. The side with the 1x has a bit of play, this play will ruin your zero, the play will still move the switching tool which will adjust your reticule left and right. The adjustment screws do not move, so the scope doesn't actually "Loose Zero" like some of the reviews gripe about.
If you can't figure out exactly were in this play the zero is, it's better for you to adjust for either 1x or 4x and don't switch(Considering the nature of the sport probably want 1x) And honestly, also considering the nature of our sport, the Zeroing isnt an issue. In most cases you won't hit the first shot anyways, so you adjust according the the trail of your shot.

If you can get past the terrible eye relief, and you can figure out the throw lever to keep your zero between each one. This scope is great.
by Gabriel F. on 01/02/2014
"Overall, I'd rate this scope as decent at best. It is not necessarily "bad", but there are gripes to be had with the Phantom.

At first glance, the Phantom looks excellent. Although the little brim above the objective lens is not true to the real steel, it is a small enough difference to not bother me, and I am pretty particular about the accuracy of my replicas, especially when it comes to optics. The trademarks, although they only say "Phantom Gear" among other things, add a really nice touch. Overall, the look of the sight is wonderful and based on that, I'd give it a 4.5/5 if not a 5/5. It also looks wonderful on a variety of different weapons. Both my M4's and my PDR look nice with it (Although the PDR looks a little impractical).

Now the first issue I had with this sight is the QD Mount. Not quite sure if mine is a lemon or if other people experience this, but the rear QD lever does not like to lock in place firmly, but this is not too much of an issue, and it is easily fixable by tightening the bolt down once mounted. The locking mechanism still wont stay stiffly locked, but the actual lever doesn't move. My next issue was with this guns fit on a 20mm rail. Between all my guns, which include a King Arms M4, a G&G M4, a KWA M4, a Magpul PDR, and an Echo 1 Red Star AKM (With an aftermarket rail on it), the snuggest fit of this sight was with the King Arms and the PDR, but there was a notable amount of wobble. On the other two M4's the wobble was significantly greater, and on the AK, it simply would not stay on the rail. Something I noticed when comparing it to my replica Ampoint T1's QD mount, is that the thicker part of the QD levers that slide below the rail are noticeably slimmer than the T1's, making it hug the rail less snugly. By placing electrical tape on the inside of the mount, I was able to get it to snugly fit the KWA receiver, which is the gun I want to keep it on, but the way the sight attaches to the mount leaves it with a little big of wobble still. Worry not however, for I have dropped my gun with the sight on it twice, and neither time did the sight come off. For that, I feel the need to give them credit.

Now moving forward, my next gripe with this are the iron sights atop the optic. They are quite honestly awful. After dropping my weapon once, the rear sight bent out of shape and was loosened from the sight. This is remedied by tightening down the screw, but the iron sight bent forward, preventing me from accessing the screw. With the second drop, the rear sight became worse and the front post became wobbly. After that I all together removed them because it was too much an annoyance, which is a shame because they added more than you might think to the overall look of the optic, however it still looks wonderful.

Now I am not going to bring up the issue of the 4x-1x zero change in depth because there are other reviews that go into it more in depth, but if this is the first review you are seeing, then just know that the crosshair does not keep its zero when you switch from one magnification setting to the next.

My final issue with this is the eye relief. For such a large ocular lens, I would assume I would get better eye relief, however, my 4x magnification Acog has better eye relief. I personally did not have a terrible time looking down the sight with my ESS Profile NVG goggles, but someone who wears a full face mask, or goggles that are less slim than the ESS will have a definite problem. The lens of the optic will likely be up against your goggles or face mask. I had a little bit of an issue looking down the sight with my Iron Face mesh mask on in addition to the goggles, so I may try putting my MAX riser mount on the optic to see if it helps.

Overall, the sight, like I said, is decent at best. In terms of function, you are better off sticking to one magnification, which might I mention, the 1x magnification must be at least a 1.5x. The ability to put a red dot in the crosshair adds a lot to the optic when sighting in a target. Mounting can be an issue depending on what gun you're putting it on, so some modification may be needed. The overall look is worth it in my opinion though, as the SpectreDR is an intimidating and rare sight, so it'll definitely turn heads, and this functions just like an Acog.

I plan on getting the G&G to see how it matches up with this. Hopefully the mount will be better and the eye relief will be farther.
Phantom Advanced 4X Illuminated Reticle Rifle Scope

  • Best in class multi-coated lenses to achieve maximum light transmisson for best clarity.
  • High strength platform completely sealed and nitrogen filled.
  • Fogproof and rainproof.
  • 4X Magnification real steel grade rifle scope.
  • Illuminated reticle with 11 levels of brightness for all environment shootings.
  • Designed for high reticle visibility and target acquisition in the most extreme conditions.
  • Integrated iron sight completed with integrated quick release weaver mount.
  • Premium precision windage and elevation adjustment.
  • Suitable for any rifle with 20mm weaver / picatinny rail.
  • Shock proof for Airsoft application with no zero lock setting for high power caliber rifles.

  • Objective: 30mm
    Maginifaction: 1~4 X adjustable.
    Eye Relief: 1.5 inches
    Lenght: 148mm
    Weight: 620g
    Body construction: Anodized Aluminum.
    Color: Matt black
    Rail Type: 20mm weaver
    Battery: 1x CR1620 (1x included)
    Package Includes: Padded pouch, hex and Phantom 4X illuminated scope.

    This product was added to our catalog on Friday 09 December, 2011.

    Wanna chat about Phantom Advanced 1-4X Illuminated Reticle Rifle Scope?

    Have questions about this item? We monitor these comments daily, but it may be faster to email us directly or call us at 1-626-286-0360.