ID: 35850 (SG-ASG-16614)
Hover or touch above to zoom
The Ultimate Spring guides are equipped with steel bearing and rotatable guides to enhance performance by reducing frictions. The core shaft of the spring guide is made out of one-piece high-strength steel to achieve 100% stability during spring compressions.Compatibility:
Version 6 & 7 (P90, Thompson, M14, EBR and other compatible Version 6 & 7 Airsoft AEG's)Material:
Lonex (OEM) / ASGFeatures:
- Ball Bearing and Rotating Guide Shaft to eliminate Spring Binding
- Full Steel construction
California residents click here for Proposition 65 warning
(Write a review)
"This is a great spring guide, just a heads up for M14 and P90 users.
The CYMA M14 actually uses a V.3 spring guide so this will not fit yours, so just go for the lonex V.3.
As for the P90, the shafts on the base are too thick (Not tall), and require too much force to fit correctly, so I recommend sanding down from the inside just a bit from one side and a bit more from the other, this way it will have one side that slides right in and another that gets stuck to make reassembly easier with the spring in.
Another option would be to get a V.2 spring guide for your P90 and it will fit without modification. It's been proven to work many times, only difference is shorter shafts but that's about it, you would see no actual difference.
"I got thisfor my KA P90 Version 6 gearbox. A slight problem... The tabs sticking out the sides are too thick, and wont slide down into place properly. The tabs on the stock guide measure 1.5mm with digital calipers. This guide measures 2.0mm, and the clearance hole measures 1.7mm. It hits the back of the piston guide. I can modify it to work. But if it says "(Version 6/7)" it should work with a version 6 gearbox.. Just saying. Now, as for the rest of it, the bearings are so smooth its crazy. Not only does the back spin.. but over 80% of the shaft spins as well, excluding the tip. That is the main reason why I haven't sent it back, I will make it work. I give 3.5 stars because it didn't just fit in. If it just dropped into place 5 stars for sure.
"Much better than stock spring guide. My P90 one was made of clear cheap plastic with bubbles and did not have a ball bearing. This allows the spring to move around while the piston is cycling which lowers the chances of a spring snapping. Also, due to the free movement of the spring it may help increase rate of fire due to less resistance. I think it's great! It fit in with no problems.
Discuss about Lonex / ASG Ultimate Upgrade Steel Spring Guide with Ball Bearing - (Version 6/7) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!