JG Engraveable Metal Body Receiver Set For M4 M16 Series Airsoft AEG (Black / Blank)

JG28635
Evike.com
3.8 stars, based on 9 reviews

$60.00

Model: MB-B-X040
x

9 Customer Reviews

by Jeffrey M. on 08/05/2015
"The gear box pin holes are out of alignment so the pin pulls the gearbox slightly to the right. The supplied mag release is weird and I'm glad I had a spare to install.

The spring for the charging handle was stretched, not a major problem to cut to length and bend the end to fit the screw but not expected on a new product.

The major problem I have is that the barrel nut thread is not the same as Real Steel, so none of the handguards I have will fit.

Not a bad body if you know what you are doing, but definitely not a good choice for your first build.
by Brennan K. on 04/18/2015
"This receiver isn't worth the effort it takes to fit gearboxes/barrel assemblies. I tried to fit two different version 2 gearboxes and both would not fit properly because the holes for the pins that hold the gearbox in place do not line up correctly. Because of this the gearbox sits at a slight angle near the front and blocks the magazines. I ended up taking a lower receiver from one of my friends for my gun build. The upper receiver needed a lot of work to fit the different lower and the barrel assembly. the lug for the main body pin needed to be shaved down so that it would work with the different lower, and the back of the upper needed to be shaved down to make it fit also. Even with the mods there is still a gap between the upper and lower near the back of the gun. There are also tabs that i assume are for locking the barrel in place inside the receiver that needed to be shaved down for it t fit my barrel assembly. Unless you want to do some work to fit the parts to this receiver and want a useless lower receiver, do not buy this.
by JS L. on 09/14/2014
"Overall, a good body at a great price. Some work may be required. Came in JG packaging. Comes with receiver pins, gearbox pin, charging handle, and bolt hold open mechanism. Needs a one piece hop-up unit, the fake right side selector switch cover, and fake bolt plate.

I bought this body to install onto a new JG M16 with a two piece barrel and a plastic body. Here are some issues I ran into:

1) The upper has two protrusions inside the hole the barrel slides into that are supposed to interface with the hop-up channels on the barrel/trunnion. These protrusions,or tabs, ensure that the hop up unit, barrel, and receiver are in alignment. In my case I had to be cut and file the hop-up channels on my barrel trunnion to accept the tabs.

2) The barrel nut from my two piece barrel would not thread onto this body. Having taken a caliper to each, it appears that the threads on the barrel nut are too small, but they could also be threaded differently for all I know. I ended up using a one piece barrel and the barrel nut that came with it (which also solved problem #1).

3) The body's stock extension was too large in some areas to accept the rear sling mount/buffer tube spacer plate without filing.

4) The paint inside all of pin holes had to be removed in order to punch all the pins in.
JG Engraveable Metal Body Receiver Set For M4 M16 Series Airsoft AEG (Black / Blank)

JG Engraveable Metal Body Receiver Set For M4 M16 Series Airsoft AEG (Black / Blank)

This is the new generation metal body kit with everything you need to install on your M4. It fits G&G, G&P, JG, Matrix, Echo1, Tokyo Marui, SRC and many popular AEG brands easily. A high quality / affordable metal receiver kit if you are looking to make your M4 / M16 full metal.

Features:

  • Die-cast aluminum alloy construction
  • Matte black anodizing
  • Standard flat top Picatinny rail
  • Factory direct OEM replacement part
  • Dust cover, forward assist, selector, mock bolt stop, and charging handle included
  • For one-piece hop-up
  • Blank lower receiver, perfect for custom engravings / laser etching
Material: Replace or add Metal Body / Receiver to your M4 / M16 series Airsoft Electric Rifles.
Weight: 575.00g
Color: Black
Compatibility: Fits Tokyo Marui, JG, Matrix, G&P, G&G, SRC, Echo1 and Other Compatible M4 / M16 Airsoft Electric Rifles

Manufacture: Matrix OEM: AIM / JG / DB

Installation: Please refer to Evike.com M4 dissembling / Assembling Video Guide for more information if you need to learn it. Slight modification may be required due to various of brands of M4 / M16.

About JG

JG / Jing Gong (China) / ASP (Hong Kong) is among the world's largest Airsoft OEM (Original Equipment Manufacturer) and pioneer for high quality Airsoft AEG rifles. With superb production capability, volume, and their close relationship Evike.com positioned JG to provide the world market with great reliable products.

Wanna chat about JG Engraveable Metal Body Receiver Set For M4 M16 Series Airsoft AEG (Black / Blank)?

Have questions about this item? We monitor these comments daily, but it may be faster to email us directly or call us at 1-626-286-0360.

Facebook about THIS with your friends! Comment for a chance to win awesome airsoft prizes. Details can be found on The Evike Facebook Fan Page HERE! Remember to leave "Also post on Facebook" checked to qualify your comment!

Items on Sale