VFC has really gone above and beyond in recreating what most would argue to be the best and most accurate SCAR in the airsoft industry. The upper receiver is expertly CNC machined out of a single block of high strength aluminum for exceptional durability and also features fully licensed trademarks that are beautifully laser etched into the receiver for authenticity.The controls of the rifle accurately mimics the real thing with ambi selectors, ambi magazine release, and reversible charging handle with functional bolt stop that will lock the bolt to the rear for easy access to hop-up controls. The collapsible/foldable stock features a 6 position length of pull and a 2 position cheek riser. Attention to detail has not been spared in this recreation of the rifle.
The internals feature reinforced high performance parts to ensure uncompromised reliability and performance out of the box. VFCs full metal version 2 reinforced gearboxes come standard with CNC steel gears and their spring auto-shim system that reduces the need to shim the gearbox to achieve optimum performance. The upgraded spring guide, light weight polycarbonate piston and airtight cylinder allow the gun to stand out as a solid contender amongst the best that airsoft has to offer.About the FN SCAR:
The Special Operation Forces Combat Assault Rifle (SCAR) was developed by Belgian arms manufacturer FN Herstal (FNH) as a reliable, low maintenance, modular combat rifle for the United States Special Operations Command (SOCOM) to replace the tried and true M4A1 carbine used by Special Forces units across various branches of the US Military.
The FN SCAR features ambidextrous controls such as an ambi selector and mag release as well as a reversible charging handle allowing the operator to configure the rifle to their preference. The CNC one piece upper receiver features an uninterrupted Picatinny top rail with two removable side rails and a bottom rail to mount any MIL-STD-1913/Picatinny accessories. The high strength polymer lower receiver helps cut down on the over-all weight of the rifle while still maintaining most of the controls of the already familiar M4/M16 system. The telescoping, folding stock allows the rifle to be fully adjustable for length of pull to accommodate any operator. With the stock folded, the SCAR offers a significantly lower profile than even the M4A1 allowing for easy storage and transportation.
- Fully licensed by FN Herstal
- Aluminum upper receiver with metal barrel assembly
- Nylon reinforced polymer lower receiver
- 6-position retractable stock
- Stock folds for easy transport
- Comfortable rubber buttpad
- Adjustable cheek riser
- Ambidextrous selector switch, magazine release, and charging handle
- Flip-up front and rear sights
- Full length top rail for optics
- Front rail system for tactical accessories
- Battery wiring hidden in stock
625mm / 805mm-865mm (Folded / Adjustable)Weight:
300rd Hi-Capacity. Works with Tokyo Marui, G&P, Matrix and other compatible M4 / M16 Series Airsoft AEG MagazinesMuzzle Velocity:
350~370 FPS (Measured with 0.20g BBs)Thread Direction:
Ver 2 Full Metal, Fully UpgradeableMotor:
Long TypeFire Modes:
Semi/Full-Auto, SafetyPackage Includes:
Gun, Magazine, ManualBattery:
9.6v Small Type NiMH / 7.4v Small Type LiPoly recommended (Battery not included)Hopup:
VFC (Licensed by FN Herstal)Things you may need to get started:
Battery and Charger – Required to power your AEG; use a high quality battery and charger for best results.Spare Magazines – Stay in the fight longer by bringing more ammo with you.BBs – High quality precision 6mm BBs recommended; Use 0.20g – 0.25g BBs for best results.Silicone Oil – Basic cleaning and lubrication maintenance help keep your Airsoft AEG in top working order.
FPS Range: 350-370
(Write a review)
"Just got my scar today and only had brief opportunities to operate it. I'll give a more detailed review when I get more trigger time with it.
One piece of advise, just get a lipo. I tried 8.4 small butterfly and small brick and they won't fit in any intuitive way. Butterfly 7.4's fit perfectly however and out of the box, my gun was chronoing around 380-390 which I'm sure will decrease as I break in the gun.
The build is solid but I only have 1 complaint about the lower receiver. The polymer doesn't feel as robust as I think it should be, especially around the mag well. If the mag well was lined with some kind of metal, I think mag insertion and dropping would be better. Speaking of mags, I tried a lonex flash mag (fell metal, reg m4 style) and it fed through my scar great. Overall, I think this a great field gun platform.
- Tan Version is beautiful
- Upper Receiver is absolutely solid.
- Light weight with nearly 400 FPS out the box with .25's (Elite Force)
- Magwell could feel a bit more sturdy
- Bolt catch is finicky, doesn't catch all the time.
- Will require you to get Lipo if you don't have them already.
- the grey used for the bracket like thing that attaches the barrel to the gas tube is hideous.
Overall 1st Impression: 4.5
"I've had this gun for about 6 months now. out of the box, the gun is great for the intermediate players. this disappointed me due to the fact that the grand total was ~$400. regardless, out of the box, the gun is well constructed. the external finish is incredible, and some of the internal parts were desirable parts. however, the piston rack was plastic, and stripped after moderate use. that was not a problem as I had a metal rack piston laying around. the wiring used for this build seemed to be 14 awg wiring and not the best quality. it did its job, however wasn't fast enough for my cqb fields. this was replaced by a nuke fet. with a metal rack piston and any mosfet really, this gun will run great. on an average 9.6v 1600mah battery, the gun ran 20rps (this is after the piston and mosfet upgrade). PLEASE PLEASE DON'T GET IT TWISTED. this gun is wonderful. other than the wiring and piston this gun has good internals. the compression was outstanding clocking at 395 fps, and the motor was of decent torque (though also replaced by a G&G high torque). the gears are a good idea with the self shimming concept. the gun has little problems with mags. it will fit G&G, VFC, Elite Force, and any stanag magazines. this is the go to gun for anyone who is tech savvy, and not afraid of upgrading the rifle. if you are afraid, the please save yourself the cost of upgrades. to sum up the gun, I love it. there isn't a better scar out there IMO. the range is above the average airsoft guns range ( im guessing 180. although I installed a tight bore the first day). if you want a killer rifle, then do not be afraid of buying this gun. just be prepared to fix the piston eventually, and buy a 0.9mm hex key for the selector switch.
ambidextrous and all the parts are sold here on evike incase of a damaged part
right under 400 fps
good angle of engagement ( after the new piston )
self shimming gears
decent torque motor
realistic and easy takedown
consistent range and accuracy
robustness of the paint on the metal ( very scratch resistant)
cons: this is what makes or breaks a gun
jank piston ( for 389.99 should have installed a metal rack)
high resistance wiring
difficulty in installing aftermarket wiring
lose hop up wheels ( the hop up unit can take G&G aftermarket wheels/dials)
battery space ( you will need a nunchuck!)
the bolt assembly does not like fingerprints (turns a purple tint from finger oils on metal)
im sorry for how picky I am. I just want to cover everything for the next buyer to learn off of
"I recieved this gun a little over a month ago and Ive been able to actually play with it a couple of times since then. Like most people will and have said, this gun is incredibly light. Of all the AEG's Ive handled, this is by far the lightest. The externals are what anyone expects from VFC which means your going to get the highest quality available. Internally unfortunately this gun is much to be desired though functionally, this gun will likly outperform most stock AEG's. Mine has been pretty accurate and was shooting right at 400 fps with .2s with very little variance. Just like others have said, the biggest drawback externally to this gun is the battery housing for the stock. DO NOT USE A STANDARD MINI TYPE BATTERY! I had to modify my 9.6 T-eng Nimh to fit in the stock whereas the nun-chuck style battery I have fits with little effort. With a big automotive style fuse and fairly fragile wiring, you really have to be careful about collapsing your stock and good luck getting it to collapse the entire way. After my last game, the positive connector to my fuse has aready broken off and Ive always been very careful with it. The wiring snags on the collapsing mechanism all the time. If the mechanism used to collapse the stock was better designed many of these wouldnt be an issue. I wouldnt run a 11.1 on this just because it isnt neccesary. This gun should be used more as a sub-DMR field rifle and not as a CQB weapon despite it having a folding stock.
- Incredibly light, great for all day events
- Externals are what VFC is known for
- Stock and battery housing could have been better designed
- Wiring could be better as well
- Only Nun-chuck style or maybe some lipos will fit
Discuss about FN Herstal Full Metal SCAR Light STD Airsoft AEG Rifle by VFC (Color: Black) with your friends and fellow Evike.com shoppers!
Comment or answer questions for a chance to win awesome prizes.
Details can be found on the Evike.com Facebook page.
Remember to check "Also post on Facebook" to qualify for the giveaways!
Have an urgent question about this item? We monitor these comments daily, but it may be faster to email us directly or call us at (626) 286-0360. Our resident experts are standing by to answer your questions!