A&K Full Metal M249 MK II SAW Airsoft AEG w/ Electric Drum Mag

4.8 stars, based on 84 reviews


Model: AEG-M249-MKII

84 Customer Reviews

by Nash G. on 07/02/2015
"I've had my gun for a few weeks now, Its been fantastic! It is very heavy, Be Warned! Over all, it is as discribed, Heavy, rugged, Scariest thing on the field!! I would suggest the Para for younger audiences however for I am 6' 1" and it is very tall, so its hard to run with if you are shorter than 5' 8" Thanks for the gun!

(side note, it comes in cheap wrapping, but is still great! IT DOES NOT COME WITH A BATTERY! YOU WILL NEED YOUR OWN)
by ANA S. on 06/17/2015
"This is a good gun.

When I received this absolute beast my battery was still in shipping, as I ordered it from amazon. So I decided to stick in my M4's 8.4v, as that was the highest voltage battery I had. To put it simply, this gun shreds. Even with an 8.4v, the gun was shooting a solid 15 rps. The range is not incredible, but it is quite adequate. Anything, or anyone, inside 160 feet will be decimated. All in all, you will not be disappointed with this demon of a gun. Huge intimidation factor.
by Trevor W. on 04/23/2015
"If you're a support gunner and you don't own one of these, you're gonna have a bad time. This gun is a BEAST. From my experience, the gearbox is stellar quality, but it needs a few minor adjustments. I personally installed an o-ring air seal nozzle (m4 type, and yes it'll work,) 509 mm Madbull 6.03 tightbore barrel (improves accuracy (debatable) and definitely adds range,) a REAPS bucking for improved range and accuracy (needs a bit of fine tuning to shoot straight,) a steel tooth strip polycarb piston (optional; the stock one lasted me 6 freaking months while running an m120. Link to steel piston: http://www.evike.com/products/30044/,) an m120 or m125 spring (the stock spring snapped after 2 months,) a bore-up cylinder, metal cylinder head, and piston head (http://www.evike.com/products/49122,) a lipo battery (optional, but recommended,) and MOST IMPORTANTLY, IF YOU USE A LIPO, GET A MOSFET (i recommend the MERF mosfet made by gate: http://www.evike.com/products/44781)

My only complaint is that the body is made of a softer metal (zinc alloy,) so the sockets for the screws get stripped real easy. Also, when taking the stock off, don't remove the pins in the stock (it'll wear down the stock over time). Instead, remove the whole stock assembly by removing the fat pin on the back of the receiver and the threaded pin just above it. Be very careful when removing screws, and make sure not to over tighten when putting them back in. Also, you should definitely get at least one MAG brand box mag. The stock box mag features sound control, but the winding mechanism jams far too often. The only other products I'd suggest are an upper RIS (http://www.evike.com/products/25789/) and a new motor (I personally love the lonex series). Just make sure if you do get a new motor that it's short type, because it won't fit otherwise.

After that huge list of parts is installed, you'll probably have spent around 500-600 dollars on this gun, but it's well worth the money. My gun personally shoots 420-430 FPS at 22 RPS with a range of around 190 ft, weighs around 17 pounds fully loaded, and best of all the gun itself has literally never jammed on me after almost a year of use (only the original box mag has).

Great gearbox shell
Excellent bushings
Excellent gear set
Decent motor
Solid construction
Large stock = a lot of room for a battery
Great ROF with mosfet and lipo
Low maintenance
Quick release barrel

Soft metal body construction
Absolutely NO accuracy without a REAPS bucking
Poor air seal with stock piston head
HEAVY (17 lbs when fully loaded)
Crappy box mag construction
BB usage :P

All in all a great gun after you put a little extra money in it, definitely recommend if you're a support gunner or are thinking of becoming one. I gave it 4 stars because of the mediocre box mag and the poor stock accuracy, but otherwise it's absolutely phenomenal. I absolutely love this thing!
A&K Full Metal M249 MK II SAW Airsoft AEG w/ Electric Drum Mag
A&K Full Metal M249 MK II SAW Airsoft AEG w/ Electric Drum Mag

  • Full Metal Receiver, Barrel Assembly, Feed Cover, and Bipod
  • Nylon Fiber Reinforced Stock, Handguard, and Motor Grip
  • 8mm Full Metal Gearbox
  • Full Length Stock
  • 2400rd Box Magazine included
  • Adjustable Front and Rear Sights
  • Steel Folding Bipod

  • Length: 1100mm
    Weight: 6800g
    Inner Barrel: 509mm
    Magazine Capacity: 2400rd Box Magazine. Compatible with Matrix, G&G, Tokyo Marui and other similar M4 / M16 Series Airsoft AEG Magazines and Classic Army Box Magazines. NOT compatible with G&P M249 Box Magazines
    Muzzle Velocity: 350~390 FPS (Measured with 0.20g BBs)
    Thread Direction: 14mm Negative
    Gearbox: Custom Full Metal, Fully Upgradeable
    Motor: Short Type
    Fire Modes: Full-Auto, Safety
    Package Includes: Gun, Box Magazine, Bipod
    Battery: 9.6v Small Butterfly Type recommended (Battery not included)
    Hopup: Yes, Adjustable

    Manufacturer: A&K

    Wanna chat about A&K Full Metal M249 MK II SAW Airsoft AEG w/ Electric Drum Mag?

    Have questions about this item? We monitor these comments daily, but it may be faster to email us directly or call us at 1-626-286-0360.

    Facebook about THIS with your friends! Comment for a chance to win awesome airsoft prizes. Details can be found on The Evike Facebook Fan Page HERE! Remember to leave "Also post on Facebook" checked to qualify your comment!

    Items on Sale